CorelDRAW Graphics Suite 11 :: Change The Bitmap Color?
May 4, 2010
i want to change the color of a bitmap that i hav in the cdr 11.
1st i draw a circle, then fill any color. then i turn that circle to bitmap by click the option "Covert to Bitmap" as RGB with 300dpi. Then i select that image, then i go to " Bitmap - Creative - Scatter". Now the image is show with edges scattered. After all these ladder i want to change the color of that image by right click on mouse from the color palatte. someone says, go back and change the color and do all these ladder. Its very difficult. i had seen this thing when i went to a printing firm near by.
Ok so I have x3 and recently installed the trial for x5, since the trial ran out i removed it and carried on as before, this however has left a few things buggy, the first was file assocation which was easier to fix, the other biggie is that I seem unable to edit any bitmaps using the usual method. How do I re-enable the bitmap editing? and if i have the choice I'd rather it opened photoshop to edit the file opposed to corel paint if this is at all possible?
When I try to convert any object to a bitmap, the resolution is highlighted but doesn't workif I want to change the existing resolution. I have to RESELECT the numbers to export to another resolution as if the resoltion WASN'T highlighted.
I am currently using this method, creating a 1-bit bitmap from a grayscale "distress" texture bitmap, choosing transparent fill or outline depending on which area i need trasparent and powerclip it in text or other vector object.
Is there a way to achieve the same distress effect with transparency with FILL ? pattern fill maybe? eg can i save in some format this bitmap to use it maybe as a pattern in pattern fill and retain transparency ?
I'm writing a coursework about banks and need to insert a picture, which shows the globe in unrealistic greenish color. Someone told me about Corel, that it has eyedropper and fill tools. But I really feel missing with all those complicated tools and get tired of trying to understand what is what. How to replace the greenish color of the globe with blue one, so it looks more like of the same color as the bottom book from the stack. The rest of the things on the pic should remain their colors.
Here is the original picture that I need to edit [URL] ...
The appearance is totally change what i mean is possibly the brightness. Every single color in the color palette change and become a shocking color. But when i print it, they got printed normally as usual. i can't see the true color i want to use in my design. They're all become a really shocking color and too bright than they supposed to be :[URL]
I've been using an older version of Corel Draw and Photopaint for years on end (Version 10 on win XP). A recent hard drive crash has moved me to the latest version of CDR/PP (X6)in Windows 7/64.
I'm amazed to see that Photo Paint hasn't changed dramatically over the last decade - most of the tools and options are where I am used to finding them. However, one function of the latest build of PP.
I do a fair amount of video editing and I use PP to create .tga files with transparency for the timelines. In version 10 of PP, I would create an object, say a red arrow for example, >mask create from object>image / paper size / background color to red> save as .tga. The background color would appear as red and would become transparent when I changed the image properties in the video timeline to "straight unmatted." Having control of the background color is important for good transparencies in video as any fringes will blend with the objects. The issue i'm having with X6 is that no matter what I do, the background color saves as white, which causes a halo when transparency is applied in the video timeline. How to change the background color when saving a .tga?
When making a print preview the drawing is looking like it should.But when printing the file on our printers (we have tested it on 2) it comes out with no background.When we change the color mode to CYMK there is no problem printing.How can we resolve this issue so that we can print in RGB color mode without having to swap to CYMK?
1. How to fit properly A4 size Rectangle in the document? because after finish work when I converted the the cdr file to TIFF, it shows the image is not fit in the document and also the print does not comes out properly.
2. An other problem I have is, when I converted cdr file to TIFF and even JPEG, color of drop shadows which was black, is appears as a white color....what should I do? how to change the color setting?
I have attached a free macro to change the text color of cells in a table. Without the macro there is currently no way to select more than one cell and change the text color.
The macro allows the user to either:
click on a table (to select it) and then apply a new color to ALL text in the table; or choose a new color from the macro from, select some cells in a table and then apply that color to the text in those selected cells
Please note in step 2 it is important you choose the new color first and then select the table cells. If you do it the opposite way around, while choosing a colour you will deselect the selected cells and apply color to all of the text in the table.
I've noticed that sometimes when I use an artistic media brush around a closed path, I can't change the brushstroke color without filling the path with that color; see the attached file for an example. I thought that was just unfortunately the way it was.But today I watched Jeff Harrison's video tutorial [URL]...about making a custom brush. He applies it to a closed path, and then, to my surprise, he changes the color and it just changes the color of the brushstroke.
I followed the tutorial, made the brush, applied it to a rounded rectangle, all fine. However, when I changed the color, the center of the rectangle filled with the color as well as changing the brush color, as it always has for me in the past. So what's wrong? Do I have some setting somewhere set to the wrong thing? (I don't have Fill Open Curves checked.)
when I select an object there is a little x that shows the center of the object, useful when trying to locate an object in an exact spot. The x is black and sometimes it is difficult to see where it is on a dark background, so is there a way to change the color of this x?
I am making a logo design to be printed on a t-shirt. When I make the logo I am making it on an 11” x 8.5” paper size. The logo is not rectangular. When I save the logo as a pdf file, the page background is showing. I also convert the pdf file to a jpg file and the white background shows. I went in and changed the page background to No Background, It did not work. I went to Options>Page size and turned off the Show Page Border, it did not work.
Just recently upgraded to Corel X6 and the colors suddenly changes. For example: A blue box changes to purple when I try to re-open the file I have previously saved. Also, embedded raster images turns to green.
Is there a way to change the default color of the Dimension lines and text? I want it to default to black not dull green! I can change it afterwards, but can't seem to find a way to change the default color.
We have just purchased X6 and are having difficulty editing a bitmap. Its unable to be selected.
After reading your posts here we have tried the following which we find quite annoying for a new program.
Surely this is something simple we have missed. All we have done is installed the X6 and run the program , clicked on a bitmap and nothing ??? This has really left a bad experience especially when we just purchased this program and it cant even edit an image. The customer support was terrible , I had to ring back because the person couldn't hear me about 8 times. It was only a search on the web that led me here.
I got a new MAC OS X 10.6.2 last spring and installed the CorelDraw 11 that I've used for several years on my other MACS. When I try to use a bitmap effect from the drop down menu (like 3D effects, art strokes, creative, contour etc...) the boxes do not open. I've tried reinstalling the application and it didn't work. I was always able to use these effects on my other computers. Every other menu item I use works. I wish Corel would make something new for MACs
This isn't something I am in need of because in the future with this graphic I would just convert the background. Just wondering why it made those odd lines coming off of the words and the black bar (I don't know how the heck you guys can post large things, things with motion, etc. I have to make things miniature to put them on here)
I assume it has something to do with how the original, that came from MillerCoors, has those layers of lines in it. I just don't get why lines would then be visible when I changed it since nothing like that has happened before. Oh, and if you are wondering why I converted it, it's because I knew my rip server wouldn't like all that stuff going on in the original
I've got Service Pack 3 which is the latest and greatest and am still finding that I cannot export to any bitmap format even in PhotoPaint. I can save as a .cpt file in PhotoPaint. Sometimes I send out .jpeg proofs and doesn't matter whether it is X5 Draw or PhotoPaint, it crashes.
I do not have this problem when I export the same thing from X4 Draw or PhotoPaint.
I am running XP on a virtualized Windows environment via Parallels desktop for Mac. I have plenty of RAM and hard drive space so it may be because I am not running Windows 7?
When having photos in CorelDraw, I need to edit them so I right click on the photo and select "Edit Bitmap". I am not too familiar with Photo-Paint, and wonder if I could link to another application (ie photoshop) to make my bitmap changes.
