When making a print preview the drawing is looking like it should.But when printing the file on our printers (we have tested it on 2) it comes out with no background.When we change the color mode to CYMK there is no problem printing.How can we resolve this issue so that we can print in RGB color mode without having to swap to CYMK?
View 2 RepliesThe problem is when i import a pdf file in coreldraw.
Mode cymk change all colors in RGB and i don't want this. How is possible?I need import pdf file cymk in the same mode. The pdf file is vector and cymk like source.
I just got X6. I can't get my default color mode to save. I go to options, document,general and change it from CMYK to RGB click document to save styles for all but it doesn't save it. When I export I have to manually change CMYK to RGB and the resolution every time. In other versions once I set it it was always there. Am I missing a setting somewhere?
View 2 Replies View RelatedWhat are the difference between using cymk color mode
and rgb color mode.
I noticed that it seems that you can't apply some filiters when the mode is cymk(or is it cmyk)...
I'm writing a coursework about banks and need to insert a picture, which shows the globe in unrealistic greenish color. Someone told me about Corel, that it has eyedropper and fill tools. But I really feel missing with all those complicated tools and get tired of trying to understand what is what. How to replace the greenish color of the globe with blue one, so it looks more like of the same color as the bottom book from the stack. The rest of the things on the pic should remain their colors.
Here is the original picture that I need to edit [URL] ...
How do I change the properties of a line? I can do it before drawing. What if I want to change after drawing in PhotoPaint?
View 7 Replies View RelatedI'm trying to change the color of the border around my image from black to white. I was able to create the border. Now, how do I make it white?
View 1 Replies View Relatedi want to change the color of a bitmap that i hav in the cdr 11.
1st i draw a circle, then fill any color. then i turn that circle to bitmap by click the option "Covert to Bitmap" as RGB with 300dpi. Then i select that image, then i go to " Bitmap - Creative - Scatter". Now the image is show with edges scattered. After all these ladder i want to change the color of that image by right click on mouse from the color palatte. someone says, go back and change the color and do all these ladder. Its very difficult. i had seen this thing when i went to a printing firm near by.
Is macro can change color of the work envoronment in CD? I can't stant the white anymore.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
The appearance is totally change what i mean is possibly the brightness. Every single color in the color palette change and become a shocking color. But when i print it, they got printed normally as usual. i can't see the true color i want to use in my design. They're all become a really shocking color and too bright than they supposed to be :[URL]
View 4 Replies View RelatedI've been using an older version of Corel Draw and Photopaint for years on end (Version 10 on win XP). A recent hard drive crash has moved me to the latest version of CDR/PP (X6)in Windows 7/64.
I'm amazed to see that Photo Paint hasn't changed dramatically over the last decade - most of the tools and options are where I am used to finding them. However, one function of the latest build of PP.
I do a fair amount of video editing and I use PP to create .tga files with transparency for the timelines. In version 10 of PP, I would create an object, say a red arrow for example, >mask create from object>image / paper size / background color to red> save as .tga. The background color would appear as red and would become transparent when I changed the image properties in the video timeline to "straight unmatted." Having control of the background color is important for good transparencies in video as any fringes will blend with the objects. The issue i'm having with X6 is that no matter what I do, the background color saves as white, which causes a halo when transparency is applied in the video timeline. How to change the background color when saving a .tga?
1. How to fit properly A4 size Rectangle in the document? because after finish work when I converted the the cdr file to TIFF, it shows the image is not fit in the document and also the print does not comes out properly.
2. An other problem I have is, when I converted cdr file to TIFF and even JPEG, color of drop shadows which was black, is appears as a white color....what should I do? how to change the color setting?
BDTableTextColour_v3h.gms
I have attached a free macro to change the text color of cells in a table. Without the macro there is currently no way to select more than one cell and change the text color.
The macro allows the user to either:
click on a table (to select it) and then apply a new color to ALL text in the table; or choose a new color from the macro from, select some cells in a table and then apply that color to the text in those selected cells
Please note in step 2 it is important you choose the new color first and then select the table cells. If you do it the opposite way around, while choosing a colour you will deselect the selected cells and apply color to all of the text in the table.
cs_setInnerHtml('video_ad5e34dd-845c-4786-85b1-a1ffefea52ae','');
brushstrokes.png
I've noticed that sometimes when I use an artistic media brush around a closed path, I can't change the brushstroke color without filling the path with that color; see the attached file for an example. I thought that was just unfortunately the way it was.But today I watched Jeff Harrison's video tutorial [URL]...about making a custom brush. He applies it to a closed path, and then, to my surprise, he changes the color and it just changes the color of the brushstroke.
I followed the tutorial, made the brush, applied it to a rounded rectangle, all fine. However, when I changed the color, the center of the rectangle filled with the color as well as changing the brush color, as it always has for me in the past. So what's wrong? Do I have some setting somewhere set to the wrong thing? (I don't have Fill Open Curves checked.)
Where do I find how to change the workspace border size and color? I see no such options in TOOLS >Options > etc.
View 11 Replies View Relatedwhen I select an object there is a little x that shows the center of the object, useful when trying to locate an object in an exact spot. The x is black and sometimes it is difficult to see where it is on a dark background, so is there a way to change the color of this x?
View 6 Replies View RelatedI am making a logo design to be printed on a t-shirt. When I make the logo I am making it on an 11” x 8.5” paper size. The logo is not rectangular. When I save the logo as a pdf file, the page background is showing. I also convert the pdf file to a jpg file and the white background shows. I went in and changed the page background to No Background, It did not work. I went to Options>Page size and turned off the Show Page Border, it did not work.
View 8 Replies View Relatedcorelx4.jpg
When print an image, the color change. All the colors are different in the paper.
My printer is Canon ip4200.
Just recently upgraded to Corel X6 and the colors suddenly changes. For example: A blue box changes to purple when I try to re-open the file I have previously saved. Also, embedded raster images turns to green.
View 10 Replies View RelatedIs there a way to change the default color of the Dimension lines and text? I want it to default to black not dull green! I can change it afterwards, but can't seem to find a way to change the default color.
View 1 Replies View Relatedhow do I Change the light blue color of text selection in corel x6
View 11 Replies View Relatedwhy change the CMYK values of a color when converting to spot color in a color chart
xmp C 0 M 90 Y 100 K 0
to C0 M 87 Y 89 K 0
I have a complex (includes tints) clip art object that needs printing in a specific pantone color I just convert it to grayscale using edit>find and replace objects>color mode. then print it as a black plate and just use another color on press.
Today I had to send off artwork to another printer. Dang. How to install a macro. Import clip art to be modified to a new document, do not do this in your working document.
Use Edit>Find and Replace> Find Objects
Replace a color model or palette. Next
Leave as is except change Replace with color model to "Grayscale" Next>Replace all
Repeat 2-4 for 'outlines' if you have them.There you now have a gray scale clipart, but the fun continues!You'll need to know what pantone color you want to use. Let's say Reflex Blue. Make a square and color it Reflex blue from a pantone palette.Duplicate the square and create swatches at 90% 80% 70% etc down to white.Select these square swatches, then Windows>Color Palette>Create Palette from Selection. Save palette with a temporary name, it is only time use. Or you could call it 'Reflex Blue'Now go to this website and download the macro "limit colors" URL...
Drop it in your GMS folder in under your username to install the macro. (might have to save the drawing and restart Corel...)Once you reopen your now grayscale clipart document, Select the clipart. Run the macro (Tools>Macros>Run Macros) LimitColors.Posterize select the number of colors in your new palette if you created 10% swatches, go with 11, if you did steps of 20% then you'll do 6 (don't forget white).Run the macro LimitColors.LimitColors and select your new palette you made in step 9.
what the resolution is on the screen in Pixels mode? Where Corel finds the value of resolution?
View 11 Replies View RelatedEvery time I type text into a box (wrap) it's invisible - maybe white (but background is white, so it look invisible). How to set the color by default. Back to black.
View 6 Replies View RelatedHow do I remove the "paragraph" symbol or turn it off??????
It wasnt on when i first installed it last week and i must have turned it on by accident...and there is not a button that i can see to turn it off like in ms word.
A colleague of mine has problems when moving a textbox.She grab the textbox with the mouse, the complete work area change to a white background, so she doesn't see, where she has to drop the mouse cursor. After she drop the mouse cursor, the background change to the graphic again.
The hardware she uses is new and included the following components:HP Z200 i7-870 Workstation2,93 GHz, 6 GB 1333MHz DDR3, ATI FirePro V3800 with 512MB RAM, Windows7 Prof 64bit
Is there a way to apply a color to selected objects without having to search for the color in the color palette. So say if I am working with an image that has multiple colors but want to use only one of the colors in that image, is there a way to apply it without having to create or add it to the palette.
View 3 Replies View RelatedI've created a simple graph of an area painted with some transparency in Origin Pro 9.1(such as this: URL..... and copied and pasted it on a blank CorelDraw X6 file. The area in the embedded image looks checker board pattern, not transparent as in the original image.
The problem appears to be within CorelDraw, as the embedded link to Origin software works fine, and an embedded image of the same graph in Microsoft PowerPoint looks just fine.I've tired combinations of earlier Origin versions (9.0, 8.5) , CorelDrawX3, XP and Windows7(32bit, 64bit). All failed.
In my one file I am unable to do copy and past command in paragraph text mode in one particular paragraph text handle. Can't find the reason. But in same file with new artistic or paragraph text handle I can do copy and past.
View 3 Replies View RelatedIs there some Script / Macro to change / convert / apply color modes in all bitmaps of a file? (convert them all to CMYK lets say)
Wx Tools have "set DPI", "downsample", "resize" but not "change color mode".