CorelDRAW Graphics Suite X6 :: Embedding Origin Pro Graphs With Transparency Mode Fails
Dec 3, 2013
I've created a simple graph of an area painted with some transparency in Origin Pro 9.1(such as this: URL..... and copied and pasted it on a blank CorelDraw X6 file. The area in the embedded image looks checker board pattern, not transparent as in the original image.
The problem appears to be within CorelDraw, as the embedded link to Origin software works fine, and an embedded image of the same graph in Microsoft PowerPoint looks just fine.I've tired combinations of earlier Origin versions (9.0, 8.5) , CorelDrawX3, XP and Windows7(32bit, 64bit). All failed.
View 3 Replies
ADVERTISEMENT
May 6, 2011
I want to be able to measure objects from their top left position in relation to the x - y position. It appears that I can measure from the centre of objects but that makes the x-y co-ordinates something other than 0.
I can also measure objects from an x-y of 0 but then the object co-ordinates are x0-y0 regardless of where it is on the page.
In Illustrator you can elect to measure from top left to bottom right of an object including the middle nodes in relation to the x-y (wherever you set it), I am sure this must be possible but how.
View 3 Replies
View Related
Apr 1, 2011
I have a patern, I need to move, I know in advanced I can more it with Origin, but I have to close and open the window.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
View 1 Replies
View Related
May 27, 2011
New purchase of X5 Home & Student.
PC - Dual core with 2Gb RAM 300Gb disc space running MS XP Sp3 (ALL Latest updates installed), latest NVidia drivers installed. I have looked at all previous inputs on this problem and carried out installation with Anti-Virus disabled, FIREWALL disabled, disconnected from network etc etc.
On attempting to start any of the package applications the software fails with an A.R.M. error.
View 2 Replies
View Related
Dec 17, 2012
A graphic exported in Draw & PP in X4 as a .png works fine.
The same graphic copied & pasted into Draw or PP in X6 does not.Repeatable 100%...The eyedriopper selection of the transp[arent color seems to pick up the right color, but the output presents like a .jpg. Viewed in IE9, Firefox & Chrome with same results.
View 11 Replies
View Related
Feb 9, 2012
I have a background image with Linear transparency applied on the top of my image. I would like to replicate the same transparency on the bottom of the image. How can I do this?
View 4 Replies
View Related
May 9, 2013
Is it possible to do transparency all around the edge of an object. say you had drawn a circle can you make the edge all around transparent or say make just the middle transparent?
I often find that I would love to fade out in more than one direction.
[URL]......
View 10 Replies
View Related
Sep 3, 2013
Is there a way to control the layer transparency in CorelDraw 5? We often have control objects we need to superimpose over the actual drawing object, but want to see through the control object (on a higher layer) so we can align the actual drawing beneath the control layer.
View 14 Replies
View Related
Nov 30, 2012
Adding transparency to an object makes Photo-PAINT render it falsely. It's getting rendered almost completely transparent.
Exporting the image shows that the alpha channel should not be applied as much as Photo-PAINT wants you to believe.
I've set the object's transparency to 18% after adding/combining a drop shadow to it.
Original object:
Object after having set its transparency level to 18% (it's falsely displayed almost invisible):
Exporting the image to PNG format:
Resulting image when rendered in Internet Explorer 9:
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
View 1 Replies
View Related
Jul 9, 2013
This is my first post in the Corel forum and I hope I did it all right here:
First Bug -> In my last contest work I've tried to embed many transparency effects. While I designing my graphic I've used (among many others) a transparency effect that named »Behind« (in my German version of CorelDRAW it's named »Hinter«). I've applied that effect to a texture bitmap graphic and it worked correctly so long the bitmap overlaid a vector shape in an ordinary way. But after I include the bitmap into the vector shape (using the vector shape as a Power Clip) obviously the used transparency effect conflict with the anti aliasing function of the vector shape and the smooth margins of the vector shape turned into rough boarders and the vector shape looked like a bitmap in a poor resolution. I guess it is only an indication error in CorelDRAW but for a designer's eyes this bug is very disturbing and should be corrected by Corel!
Second Bug -> Often I use CorelDRAW for vector illustrations and that's why I have to integrate scanned sketches (JPEG format) to build vector illustrations bases of it. Here we have another indication error or better to say a performance problem of CorelDRAW. While I using the sketch image in extended view mode the zoom function of CorelDRAW works correctly and pleasant fast. But if I switch to simple contour mode the performance of zoom mode of CorelDRAW worsens rapidly. The performance of my computer is not the problem with this because my hardware is on a high level and I use an well arranged and clean Windows 7 operating system. It would be nice if Corel is able to fix that problem because it disturbs the work flow enormous and it minishs the fun that I have while I'm using CorelDRAW!
View 3 Replies
View Related
Jan 26, 2012
We have an issue happening on many of the documents that we have that include a transparency or gradient. We did not have these issues in Draw12. (but did have printing issues)
1st issue: Opening these gradients will randomly flip them. Like so:
The bottom image is correct. Now when we print them from Corel Draw X5 to either of our printers (Bizhub C250, or Biizhub C360ps) we get the following (this is created from the same master file, same settings):
Notice the lens effect color replacement is gone, and the bottom gradient is barely visible, the top one not working at all.
Same document, saved to 12 and printed the same way:
Both sent with identical printers settings, same print driver, and as close as possible settings in the X5 and Draw 12 dialog print boxes.
View 14 Replies
View Related
Sep 9, 2013
I have been getting an immense number to images lately that have that wonderful white background.
I simply use the masking tools and cut/paste back into Draw to get a transparent background, but it is time consuming.
Any way to do this with Replace Colors?
View 3 Replies
View Related
Mar 24, 2011
In CD, the arrow on the right is the original. Then I applied convert to bitman and got what is on the left.
Why shadow is gone, why the fontain fill (white) become transparency?
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
View 10 Replies
View Related
Jun 13, 2011
I have about 8 squiggles that are quite wide. I use the transparency tool in radial or conical mode... the center position matters, but it seems like essentially the same transparent effect stays regardless of the distance of the radius laid down by the tool. the little slider bar seems to do something, but I'm trying to get the transparency to go out more... but the radius doesn't change the transparency effect.
This seems like a bug. Why wouldn't the distance from the center to the edge matter?... the distance matters when it's working in linear transparency mode.
View 3 Replies
View Related
Jul 30, 2012
If this is possible to have a transparency brush in doing fades on curves. the brush would enable to lighten spot colors when brushed over the curve or curves. you could make a whole graphic fade out around the edges just by brushing over the edges.
You could have the capabilities to adjust the amount of the fade on a tool bar. maybe this is out there, but it would save a lot of time when doing graphics for t shirts and you want to fade the edges of the image on the shirt. you rip program would define the half tones by the transparency fade.
View 3 Replies
View Related
Aug 24, 2011
Is there a way to edit the transparency of a dimensioned object? I have many complex objects and sub-objects with transparency fills and all individual parts dynamically dimensioned. I find I cannot edit the transparency of any part that has a dimension. Surely there must be a way to do this...?
My dimensions are color-matched to the fill parts, and the text dimensions and dimension lines are different sizes and weights making it very time-consuming to delete, edit transparency, and then recreate the dimension with all the desired properties.
View 2 Replies
View Related
Jun 10, 2013
I would like to apply a transparency to some brush strokes. But when I click on a group of brush strokes, or select a single brush stroke, I can not start a transparency, or I get an error that there are too many objects.
I have some brushes that emulate smoke, but I would like to ad transparency to them.
View 2 Replies
View Related
Dec 12, 2011
I have a problem with Corel Draw x4 .eps exporting.When i exported graphic elements what contains gradient or transparency effect in eps format these elements appears broken or destroyed. how can i export this graphics correctly with CDRx4.
View 1 Replies
View Related
Nov 22, 2011
I have a curve fill with K100 and 50% transparency placed on top of a solid color background. [TOP]But when I turn the proof color on, or export as CMYK JPEG, or PDF, the result is as below. [BOTTOM]
View 6 Replies
View Related
Mar 23, 2011
I tried to apply a transparency to a beveled rectangle and was unsuccessful to get any effect to apply. Tried to make the bevel first and then apply transparency and vice-versa, a transparent rectagle and tried to do bevel effect. Neither way would work.
Don't they play nice together, or do I have to try it in PP?
View 13 Replies
View Related
Jan 28, 2013
Are we able to do this now in Coreldraw X6?
View 10 Replies
View Related
Jun 19, 2013
Is there any way to quickly apply uniform transparency at a given percentage, without going through the properties bar?
View 5 Replies
View Related
May 13, 2012
i have that issue i made one flyer w X4 where exist a bitmap that must be to the edge of cutted paper , so i made it bigger out of page, i close it to PDF for my printer adding a bleed limit, everything else out of page (inside the bleed ofc) appear BUT the bitmap (lens) stop to the edge of page.
View 12 Replies
View Related
Sep 11, 2013
what the resolution is on the screen in Pixels mode? Where Corel finds the value of resolution?
View 11 Replies
View Related
May 8, 2011
Every time I type text into a box (wrap) it's invisible - maybe white (but background is white, so it look invisible). How to set the color by default. Back to black.
View 6 Replies
View Related
May 3, 2012
I just got X6. I can't get my default color mode to save. I go to options, document,general and change it from CMYK to RGB click document to save styles for all but it doesn't save it. When I export I have to manually change CMYK to RGB and the resolution every time. In other versions once I set it it was always there. Am I missing a setting somewhere?
View 2 Replies
View Related
Jan 3, 2012
How do I remove the "paragraph" symbol or turn it off??????
It wasnt on when i first installed it last week and i must have turned it on by accident...and there is not a button that i can see to turn it off like in ms word.
View 11 Replies
View Related
May 9, 2013
The problem is when i import a pdf file in coreldraw.
Mode cymk change all colors in RGB and i don't want this. How is possible?I need import pdf file cymk in the same mode. The pdf file is vector and cymk like source.
View 3 Replies
View Related
Apr 4, 2012
When making a print preview the drawing is looking like it should.But when printing the file on our printers (we have tested it on 2) it comes out with no background.When we change the color mode to CYMK there is no problem printing.How can we resolve this issue so that we can print in RGB color mode without having to swap to CYMK?
View 2 Replies
View Related
Jun 6, 2011
Can you apply tranparency to a stroke made by artistic media? his seems like it should be possible... I've been told to use the transparency tool for my type of transparency needs... but I can't find a way to get this to work. It would be handy... in PS, you just adjust the transparency slider for the object or layer. In Draw, how is this done specifically for an artistic media brush stroke?
View 1 Replies
View Related
Nov 28, 2012
I have a file set up that has a white box with a 65% transparency lens. When I go to print, the white box and what's under it disappear and do not print. If I close the document and reopen it, the transparent box and what under it are back.
What do I need to do so this doesn't happen?
View 10 Replies
View Related
