The problem is when i import a pdf file in coreldraw.
Mode cymk change all colors in RGB and i don't want this. How is possible?I need import pdf file cymk in the same mode. The pdf file is vector and cymk like source.
when I select "all objects" via the menu and remove the setting "scale with object" from the object properties the color changes from CMYK to RGB. I cannot even redo. All actions are redone but not the color. The primary color of the document is CMYK. This happens only to the borders and not to the fillings.
View 1 Replies View Relatedwhy change the CMYK values of a color when converting to spot color in a color chart
xmp C 0 M 90 Y 100 K 0
to C0 M 87 Y 89 K 0
When making a print preview the drawing is looking like it should.But when printing the file on our printers (we have tested it on 2) it comes out with no background.When we change the color mode to CYMK there is no problem printing.How can we resolve this issue so that we can print in RGB color mode without having to swap to CYMK?
View 2 Replies View RelatedCOREL PAINT X3 does not do a very good job of rendering most of the CMYK images we've been getting in from our Taiwan base, and, due to language problems, we have been unable, despite decades of trying, to communicate the issues. Typically we do the original photo here, something that I used to do, but now the company uses a professional photographer - not wanting to spend big bucks on a professional camera.
His ultra-hi-res RGB photos are sent to Taiwan, where they are cleaned up and converted to CMYK using an unknown color scheme, for use in printing our mini catalog. Then I get the catalog back - in InDesign - with instructions to convert the linked CMYK photos back to RGB for use on the website, etc. The color model that they are using in Taiwan, however, typically has deep black at something like 70,65,65,70, which shows on the screen in Paint as very dark and garish, and it means that if I use the default RGB conversion, it looks that way in RGB as well, and half the picture will be solid black - 0,0,0. I.e., unusable. Oddly enough, however, it prints just fine.Now I'm pretty good with Paint, and I know how to use the tone curve to reset the values in the CMYK to usable levels, but it takes time, usually 3 or 4 tries to get it on the money, and of course in the process I'm compressing the color space by half, so there is an inevitable loss of detail.Of course, if I could get them to send us the original RGB or their cleaned up - background dropped out - version in RGB, then the problem would be eliminated, but no luck so far on that. My question is, is there any way to simplify what I'm having to do?
Is there any other way to save X4 files to X3 without going into the save dialog and changing the version you want it to be saved in? Also Is there any other way for me to convert all rgb in a document to cmyk without selecting the objects or using the object manager?
View 5 Replies View RelatedI have all my color setting set to RGB but when opening already saved documents the colors still show up to be CMYK. How do I change this?
View 8 Replies View RelatedOn Corel X3 I used to export jpg proofs for email purposes. I could send RGB or CMYK version but CMYK did not appear properly on some computers (especially Macs) so I did everything as RGB.
Now in X5 I can see that standard 100% black exported as RGB gives just grey colour.
I understand that this may be appropriate conversion to indicate that this is not rich black (exporting as cmyk is fine) but I don't think it's a good solution because most of people refer to visual appearance on the screen.
Can I change anything to get the result more like on screen (like with X3)?
I don't know how do I send it now, If I send as RGB the colour is wrong (I would need to convert everything in cmyk to 100%) if I export as cmyk Mac users will see it wrong.
Graphic Designer, Web designer and playing with Video and Audio mixing and editing as well ;-).Working for Large Format Printing company Carrick Signs.
how to convert the cmyk to pantone colour without the color change, is their any way to find it
View 2 Replies View RelatedHow to save Ai file in CMYK, in Corel Draw. How do I convert colors from RGB to CMYK?
View 9 Replies View RelatedI was given a CMYK TIF file that has two added spot color channels. CMYK channels are empty. Bringin this into Draw X6 64 bit shows nothing but a white box and when attempting to print separations the print dialog says "nothing selected to print." So I opened the file in Photoshop, deleted the CMY&K channels, saved it as a PSD and imported to Draw which labels it as a Bitmap (Multichannel DeviceN). The two spot colors appear in the document color palette and it displays and appears to separate properly in the print preview.
View 2 Replies View RelatedMy CMYK palette is the same hue as my RGB palette right now. I guess you know the difference. RGB looks bright and high in contrast like the ones used in Microsoft word. And the cmyk is, not the bright... Anyway, so the problem is...its the same color on my monitor. Its looks all RGB. On my other PC-2, its the other way around. My RGB palette looks like CMYK. Its not much of a problem with my PC-2 because i rarely use it for photo editing. Its just use for our cutting machine, the other one, my PC-1..
What's going on because it where i do most of my designs. And the color is a major factor there because most of our clients usually send their design to email and they have specific color. So, im having trouble doing designs. Is there a problem with my monitor? I tried editing my files on PC-2 but if i transfer it to PC-1 the color is different again... I cant get the exact (almost) color i want. The adobe gamma isn't do much either nor the monitor adjustment. Do i need to get a professional calibrator for all my PCs or are there downloadable calibrator on the internet? I was about to try the one about CorelDraw 12 Color Management guide but im still not sure about it. I have to read the infos first.
Here's from my PC-1. To the left is the CMYK and on the right is the RGB
Now here is from my PC-2. Left is CMYK and right is RGB.
When viewed from my PC-2..this one looks all CMYK (and dull)
Why is it that when I import an RGB image, when I convert it to CMYK this same image darkens significantly? Is there an option I can check somewhere?
View 5 Replies View RelatedI am trying to make CMYK printing plates for process work. How would I take my picture and divide it up into CMYK so I can print each color one at a time onto a polyester plate? I use corel X4 and my printer for the plates is an HP 5100. Can this even be done?
View 5 Replies View RelatedAgain a new version and again the same issue like in all previous versions. One could think that issues solved in one version would not be present in the next one.
Again Corel made barcodes apear in all colours in separations, instead of the logical Black only.
I know I can export to pdf and then import again, change colour to black to solve it, but if you want to keep editability or have to do 100+ Barcodes, this is just annoying.
Importing a file in RGB and converting it to CMYK values are different estremamante performing the same operation in photoshop. The setting of the color profiles is the same and also varying the options Microsoft ICM CMM in color management, keep varying the pure black and gray to black colleague CYMK, does not improve anything. The conversion in coreldraw is too much dark and this is a problem. How is it possible?Here the setting of CorelDraw and Photoshop.
View 14 Replies View RelatedI've got a Draw document in RGB.
I added some paragraph text - just dragged a text frame and typed some in. Why is it CMYK?
I made a contour, one step, of a rectangle. Broke it apart. Why is this new rectangle's outline CMYK?
Ideal color settings for exporting .jpg and .eps files for CMYK printing? The default X6 settings result in rather washed out looking exports (both on the screen and on the prints). Black looks very dark grey etc.
Never had this issue with X3 but I understand that X6 uses a totally different color engine so I figure I just need to know the correct settings.
Something strange happened today when I was working on a cdr project. I think I have by mistake somehow managed to completely delete the original rgb palette, copied the cmyk palette and saved it as "rgb" palette. As a result if I try to change the color palette, the rgb and the cmyk options are exactly the same palettes.
This happened whilst I was working on a cdr drawing. Somehow I managed to press a wrong key combination whilst trying to save (probably CTRL-something and then CTRL-S immediately after) and noticed that the colors on my drawing changed. I tried to undo, but nothing happened.
After some checking I realized that the original rgb color palette has been replaced with a copy of cmyk. If I now try to switch color palettes, the cmyk and the rgb are exactly the same palettes regardless of which cdr project I open (new or saved).
This is how I tried to fix the issue:
I tried F8 during startup - no change
I tried with the repair option of the installation cd - no change
I tried a removal and a new installation of the Suite - no change.
Could be worth a try: Maybe someone could send me a copy of their rgbstd.cpl-file so that I could replace mine in the C:Program Files (x86)CorelCorelDRAW Graphics Suite X4LanguagesENProgramsData
How to restore the rgb color palette to it's original status as I work mainly with drawings displayed on the net, not on printed materials and I'm getting desperate as I have a deadline tomorrow.
i'm trying to export an image as a jpeg but as soon as i change from RGB to CMYK the previewed image just becomes a solid black.
View 5 Replies View RelatedI have lost the CMYK and RGB color pallets on Corel, we have tried re-installing, but still nothing!
We need these color palletes for printing purposes.
I used to have X4 installed on XP and it worked fine. Recently I re-install the program onto my new Win7 PC. It was working fine at first but one day my CMYK palette turn into some weird colors (much brighter than the original one)
I tried to hold F8 to launch X4 to turn it back to dafault settings but no go. I tried uninstall and reinstall and it's the same. Finally I downloaded the latest X5 Free trial and the color palettes are displaying correctly! (So i figure it's not my monitor's problem nor some Windows setting.)
(X5 Displaying the correct CMYK color palette)(Ised X4 for a few days and the colors became much brighter than the original ones.)
I always use CMYK in my designs and the Pantone color codes for their logo design. I have never had to convert them before and have searched forums and boards with no luck in finding an easy way to do this.
View 4 Replies View RelatedThis discussion is on using RGB file creation techniques to output to ink jet devices. I posted the comments below the link because color management off always pops up in the conversation as it turns to non-postscript devices so I wanted to circumvent the side bar conversation.
[URL]....
First let's get this straight, I've written it and said it about a thousand times, you cannot turn off color management.
When you select simulate color management off in the default application color management dialog, CorelDRAW simply utilizes a different set of color management settings. The rules of color management never change! The application requires guidelines on color and still must have rules that govern conversions, PERIOD.
These rules are not different, only the engines, rendering intents and profiles change. These setting in X5 and X6 can be, in some cases adjusted to simulate previous setting in versions prior to X5 that were labeled color management off, but this label in older versions (X4 and older) were deceptive in their nature, color management was never turned off, just set to a specific configuration.
Simulate color management off (in X5/X6) uses wide gamut cmyk simulation as the CMYK profile, it disengages the color engines (setting CorelDRAW to another internally controlled process) and sets the interface to RGB. It does not turn color management off.
These settings have many uses for industries such as laser engraving and screen printing separations and I support their continued use. Do not confuse this and use these settings for professional output using press work, ink jets or digital printers.
Recently found another bug in X6. This time it is in the Pantone conversion tables when converting to cmyk. I had a job that had been updated over the years and the file was last used in X5. The colour in question was PMS 7406. The file opened fine & was converted to cmyk and sent to the printer unchecked. What could possibly go wrong - this file had been used countless times before without incident. Pantone 7406 breaks down to 18% magenta and 100% yellow (as per Pantone's own specification). X5 converted it to 17% magenta and 100% yellow. Near enough - I'm not going to quibble over 1%. However, opening the X5 file in X6 caused it to use the 'Pantone previous version' colour table (and you don't get any notification that it is doing it). Result is that it now converts the colour to 18% cyan, 24% magenta and 100% yellow. Where the #@**# did it get the cyan from? We are now talking about a completely different color!
It gets worse. If you create a new object in X6 and fill it with PMS 7406 (using the Pantone + colour table) and then convert it to cmyk, you get 6% cyan, 22% magenta and 100% yellow. Again, this is not the correct break down of this colour. Pantone is a world standard with known conversion to cmyk figures. InDesign can get it right, Illustrator can get it right, then why can't Corel? And how many other Pantone colours are wrong? I have used Draw for 20 years and this is the worst bungle yet (apart from version 4). For a program that tells the world it is a professional program to screw up like this beggars belief.
If we have to check every single Pantone to cmyk conversion against the Pantone specifications, then it just isn't worth using Corel in printing. Add this to the font problems in Font Navigator and the scale error in Barcode Generator and it make X6 pretty much useless in the print industry. Throwing in freebies like fonts, second rate web creators and Photo Paint are not much use when the flagship program is sinking.
I have recently traced a new picture and I am about to add colors to it so that I can upload it later on my gallery. I started the Tracing on a Cmyk based template because one day I will use print it to add it to my portfolio! I mean should I add Cmyk colors and them convert them to rgb in order to upload it?
View 7 Replies View RelatedPREVIEW.jpg
After installing SP3, the Export preview window, as CMYK, shows a black window, but the file is exported correctly. This situation does not happen when the file is exported as RGB. Any explanation why this happens? I´ve tried with different files and happens the same "black window".
I am trying to export a file for my printer and my CMYK colors are not looking right on the exported file, they are very dull and the colors are not the same at all.
I have changed my DRAW files to be ONLY CMYK colors and have experimented with the Color Management tool to no use at all and reset the workspace.
For example: the blues that my client chose are C56 M0 Y6 K0 and C30 M0 Y60 K0 - they look great onscreen, but once I export to a jpg/eps/tif/etc the colors dull down and don't match at all!
I need to know if i can make a file into a process color like cmyk for plates. How would i do that
View 5 Replies View RelatedI made a menu card cover using lens effect...but converting this design to CMYK/ RGB Bitmap show varied color?
View 1 Replies View RelatedIf you take blend tool to gate one color to other or same or gray scale it give correct result. But if you use New color style and new gradient it show wrong effect in CMYK.
View 6 Replies View Related