CorelDRAW Graphics Suite X4 :: Exported Files Don't Show True CMYK Colors
Aug 4, 2011
I am trying to export a file for my printer and my CMYK colors are not looking right on the exported file, they are very dull and the colors are not the same at all.
I have changed my DRAW files to be ONLY CMYK colors and have experimented with the Color Management tool to no use at all and reset the workspace.
For example: the blues that my client chose are C56 M0 Y6 K0 and C30 M0 Y60 K0 - they look great onscreen, but once I export to a jpg/eps/tif/etc the colors dull down and don't match at all!
View 14 Replies
ADVERTISEMENT
Feb 12, 2013
I have all my color setting set to RGB but when opening already saved documents the colors still show up to be CMYK. How do I change this?
View 8 Replies
View Related
Aug 14, 2013
when I select "all objects" via the menu and remove the setting "scale with object" from the object properties the color changes from CMYK to RGB. I cannot even redo. All actions are redone but not the color. The primary color of the document is CMYK. This happens only to the borders and not to the fillings.
View 1 Replies
View Related
Dec 20, 2011
I used to have X4 installed on XP and it worked fine. Recently I re-install the program onto my new Win7 PC. It was working fine at first but one day my CMYK palette turn into some weird colors (much brighter than the original one)
I tried to hold F8 to launch X4 to turn it back to dafault settings but no go. I tried uninstall and reinstall and it's the same. Finally I downloaded the latest X5 Free trial and the color palettes are displaying correctly! (So i figure it's not my monitor's problem nor some Windows setting.)
(X5 Displaying the correct CMYK color palette)(Ised X4 for a few days and the colors became much brighter than the original ones.)
View 3 Replies
View Related
Mar 10, 2012
I have recently traced a new picture and I am about to add colors to it so that I can upload it later on my gallery. I started the Tracing on a Cmyk based template because one day I will use print it to add it to my portfolio! I mean should I add Cmyk colors and them convert them to rgb in order to upload it?
View 7 Replies
View Related
Sep 24, 2013
I made a menu card cover using lens effect...but converting this design to CMYK/ RGB Bitmap show varied color?
View 1 Replies
View Related
Jun 30, 2011
I am having a difficult time getting my eps files that I have created in X5 to separate once I export them to Indesign CS4 . . . when I try to separate the file on all my postscript 2 & 3 printers machines I don't get any separations . . instead I receive a page with ERROR: dictstackoverflow OFFENDING COMMAND: begin . . I am using spot colours. . .I can import the eps file into Corel 11 and Illustrator CS4 and they work fine once I reexport them . . I can export out of X5 as a pdf and it works fine . . . I do have Ghostscript installed .
View 14 Replies
View Related
May 30, 2011
I"ve just recently upgraded to CDGraphics Suite X5 (from 12), along with Windows 7 and M.Office 2010. When trying to export jpg's I've got 2 problems:
a) Jpg files that I"m now exporting seem to have so many more "options" for exporting and are automatically exporting colours as CMYK. Some of the software programs that I use (for programming digital signage) require jpg files in RGB. Is there a way to set this as a default instead of having to change this everytime I export? (note that I have "checked" the embed colour profile option for my US Web Coated Pantones).
b) The default for exporting is also set at "custom" - should I always be changing this to either medium or large, or can I just leave it at custom. Often I am just emailing jpg's for approval purposes, so I don't always need large file sizes. Does custom set it to the largest possible file size?
I found a tab at the top of the export window that says "Load Presets" and lists for example "low quality jpg.xml" what is this for?
c) when I look at my jpg files in my documents folders they appear "locked" with a little lock on them. Old jpg files created in CD12 don't have this little "lock" icon on them. I have checked the properties and see that these files give full access for modification etc, so I can't figure out why they may be locked.
View 3 Replies
View Related
Sep 21, 2011
I've been using Corel Draw and Photo-Paint for many years, on many versions of Windows, and as far as I remember, Windows Explorer has always shown a thumbnail for a .cpt file instead of the plain icon.
I've now got a Windows 7 machine (professional version 64 bit), and .cpt files show up as plain white icons, instead of thumbnails.
View 14 Replies
View Related
Jun 8, 2011
In Connect I see only blank thumbnails of my .cdr files. The nice thing of this program should be thati can scroll through my files and look at large thumbnail So I know what iám working on.
View 12 Replies
View Related
Jul 3, 2012
I'm using Windows 7. The previews were working now they just don't work, "preview not available". I see no check box in window 7 to turn that on or off, unlike in windows xp. I have tried turning on large thumbnails in windows explorer when opening files, older files will show up but most recent files just show the Corel Draw icon large.
Could this be some kind of auto update from Windows? Since I have no destination, I'm never lost.
View 11 Replies
View Related
Jan 10, 2012
I'm using Publish to PDF, click settings to view the tab and the last tab says 1 issue, "contain objects that fall outside of page".
I do a select all to see what nodes show up outside the page - none. Print Preview doesn't show what will be cropped.
View 5 Replies
View Related
Sep 25, 2012
issues using True Type Fonts when printing some text through CorelDraw x6. Basically I do screen printing, and I have issues printing TTF's... The text when it prints out chops letters/adds spacing where its not needed, and towards the end of the sheet of vellum - starts to print the first letter of word on the left over again...
I haven't had issues printing off of my HP printer, but that broke so I invested in a BROTHER HL-2230 monochrome laser printer.
View 12 Replies
View Related
Jun 25, 2012
I am having a strange problem when exporting jpg images. I export the image and I can open it with PhotoPaint, but if I try to import it to Dreamweaver or send it in an email, the file is attached, but the image cannot be seen. I get the square with the red X instead.
View 8 Replies
View Related
Apr 3, 2012
CDX5: Whatever color I select for fill or outline is now set as the default color for fills and outlines without expressly setting it as such. Until now when I left or right click a color with nothing selected it allowed me to set it as a default fill or outline color for graphics, artistic text, or paragraph text. It does not do that now.
Is this a "feature" that's been added that I somehow enabled? In any event, how do I turn it off?
View 2 Replies
View Related
Dec 20, 2011
If you noticed that the colour palatte colours in CorelDraw X5 are different to those in Version 10. It is more brighter and also come out much brighter when converted to PNG files.
When I zoomed in the PNG files in Version 10 I can see the small grey dotted on the image colours.
But these dotted not appeared on the PNG files in CorelX5. Is that the reason of different colours bright in X5?
What should I do to maintain the same colours bright of Version10 in X5? This is very compulsory as the PNG files version 10 has been use in the database for many years and I have to maintain the same PNG output after upgraded into X5..
View 4 Replies
View Related
Aug 10, 2012
ive encountered a problem in X3 when i try to export any artwork or photos to my desktop as jpegs they images are all blurry,outside lines are not sharp at all,ive not altered any settings whatsoever and also found that full A4 images will not save at all,just as a solid black line.
View 2 Replies
View Related
Aug 19, 2013
I am trying to export my Corel Draw project to a PDF. Everything works as expected except all Curves with lens are not showing up at all in the exported PDF.
I have tried opening the PDF with several different programs with the same result. I have also tried changing the PDF export settings but haven't had any luck.
View 15 Replies
View Related
Apr 8, 2013
COREL PAINT X3 does not do a very good job of rendering most of the CMYK images we've been getting in from our Taiwan base, and, due to language problems, we have been unable, despite decades of trying, to communicate the issues. Typically we do the original photo here, something that I used to do, but now the company uses a professional photographer - not wanting to spend big bucks on a professional camera.
His ultra-hi-res RGB photos are sent to Taiwan, where they are cleaned up and converted to CMYK using an unknown color scheme, for use in printing our mini catalog. Then I get the catalog back - in InDesign - with instructions to convert the linked CMYK photos back to RGB for use on the website, etc. The color model that they are using in Taiwan, however, typically has deep black at something like 70,65,65,70, which shows on the screen in Paint as very dark and garish, and it means that if I use the default RGB conversion, it looks that way in RGB as well, and half the picture will be solid black - 0,0,0. I.e., unusable. Oddly enough, however, it prints just fine.Now I'm pretty good with Paint, and I know how to use the tone curve to reset the values in the CMYK to usable levels, but it takes time, usually 3 or 4 tries to get it on the money, and of course in the process I'm compressing the color space by half, so there is an inevitable loss of detail.Of course, if I could get them to send us the original RGB or their cleaned up - background dropped out - version in RGB, then the problem would be eliminated, but no luck so far on that. My question is, is there any way to simplify what I'm having to do?
View 14 Replies
View Related
Oct 17, 2011
Many of my fonts become pixelated when I export them as jpeg. I use 72dpi, default settings. How can I correct that? My photos stay clean though.
View 2 Replies
View Related
Aug 22, 2013
Example01.jpg
I have used Coreldraw X5 using braille text. When I opened the files using Coreldraw X6 and exported to .SVG output. The text appears to be showing improper alignment.I want the text to be intact and letters should not break.
View 12 Replies
View Related
Feb 4, 2008
Is there any other way to save X4 files to X3 without going into the save dialog and changing the version you want it to be saved in? Also Is there any other way for me to convert all rgb in a document to cmyk without selecting the objects or using the object manager?
View 5 Replies
View Related
May 10, 2012
I have recently upgraded to X6 from X3. After design work I would export the file to jpeg for client approval. I used Apple Mail 5.2 to attach the jpeg file but my problem is the client cannot open the file. It just turns out blank with a little cross. I cannot figure out what is the problem during the export process. I have no problem at all with X3.
View 9 Replies
View Related
Apr 4, 2011
On Corel X3 I used to export jpg proofs for email purposes. I could send RGB or CMYK version but CMYK did not appear properly on some computers (especially Macs) so I did everything as RGB.
Now in X5 I can see that standard 100% black exported as RGB gives just grey colour.
I understand that this may be appropriate conversion to indicate that this is not rich black (exporting as cmyk is fine) but I don't think it's a good solution because most of people refer to visual appearance on the screen.
Can I change anything to get the result more like on screen (like with X3)?
I don't know how do I send it now, If I send as RGB the colour is wrong (I would need to convert everything in cmyk to 100%) if I export as cmyk Mac users will see it wrong.
Graphic Designer, Web designer and playing with Video and Audio mixing and editing as well ;-).Working for Large Format Printing company Carrick Signs.
View 10 Replies
View Related
Aug 2, 2012
how to convert the cmyk to pantone colour without the color change, is their any way to find it
View 2 Replies
View Related
Jun 25, 2011
How to save Ai file in CMYK, in Corel Draw. How do I convert colors from RGB to CMYK?
View 9 Replies
View Related
Jan 22, 2013
I was given a CMYK TIF file that has two added spot color channels. CMYK channels are empty. Bringin this into Draw X6 64 bit shows nothing but a white box and when attempting to print separations the print dialog says "nothing selected to print." So I opened the file in Photoshop, deleted the CMY&K channels, saved it as a PSD and imported to Draw which labels it as a Bitmap (Multichannel DeviceN). The two spot colors appear in the document color palette and it displays and appears to separate properly in the print preview.
View 2 Replies
View Related
Jul 19, 2007
My CMYK palette is the same hue as my RGB palette right now. I guess you know the difference. RGB looks bright and high in contrast like the ones used in Microsoft word. And the cmyk is, not the bright... Anyway, so the problem is...its the same color on my monitor. Its looks all RGB. On my other PC-2, its the other way around. My RGB palette looks like CMYK. Its not much of a problem with my PC-2 because i rarely use it for photo editing. Its just use for our cutting machine, the other one, my PC-1..
What's going on because it where i do most of my designs. And the color is a major factor there because most of our clients usually send their design to email and they have specific color. So, im having trouble doing designs. Is there a problem with my monitor? I tried editing my files on PC-2 but if i transfer it to PC-1 the color is different again... I cant get the exact (almost) color i want. The adobe gamma isn't do much either nor the monitor adjustment. Do i need to get a professional calibrator for all my PCs or are there downloadable calibrator on the internet? I was about to try the one about CorelDraw 12 Color Management guide but im still not sure about it. I have to read the infos first.
Here's from my PC-1. To the left is the CMYK and on the right is the RGB
Now here is from my PC-2. Left is CMYK and right is RGB.
When viewed from my PC-2..this one looks all CMYK (and dull)
View 14 Replies
View Related
Feb 11, 2013
Why is it that when I import an RGB image, when I convert it to CMYK this same image darkens significantly? Is there an option I can check somewhere?
View 5 Replies
View Related
Apr 25, 2013
I am trying to make CMYK printing plates for process work. How would I take my picture and divide it up into CMYK so I can print each color one at a time onto a polyester plate? I use corel X4 and my printer for the plates is an HP 5100. Can this even be done?
View 5 Replies
View Related
Nov 5, 2010
Again a new version and again the same issue like in all previous versions. One could think that issues solved in one version would not be present in the next one.
Again Corel made barcodes apear in all colours in separations, instead of the logical Black only.
I know I can export to pdf and then import again, change colour to black to solve it, but if you want to keep editability or have to do 100+ Barcodes, this is just annoying.
View 9 Replies
View Related
