CorelDRAW Graphics Suite X5 :: Edit Transparency Of Dimensioned Object
Aug 24, 2011
Is there a way to edit the transparency of a dimensioned object? I have many complex objects and sub-objects with transparency fills and all individual parts dynamically dimensioned. I find I cannot edit the transparency of any part that has a dimension. Surely there must be a way to do this...?
My dimensions are color-matched to the fill parts, and the text dimensions and dimension lines are different sizes and weights making it very time-consuming to delete, edit transparency, and then recreate the dimension with all the desired properties.
View 2 Replies
ADVERTISEMENT
Feb 9, 2012
I have a background image with Linear transparency applied on the top of my image. I would like to replicate the same transparency on the bottom of the image. How can I do this?
View 4 Replies
View Related
May 9, 2013
Is it possible to do transparency all around the edge of an object. say you had drawn a circle can you make the edge all around transparent or say make just the middle transparent?
I often find that I would love to fade out in more than one direction.
[URL]......
View 10 Replies
View Related
Jan 28, 2013
Are we able to do this now in Coreldraw X6?
View 10 Replies
View Related
May 17, 2011
When I group a few objects together, and apply drop shadow to the group, I cannot edit the individual object in the group (cannot pick it to move it or resize it etc) without removing the drop shadow.
View 15 Replies
View Related
Sep 2, 2011
In CorelDRAW 12 I created a design with a few bevel effects on simple polygons. I now have CorelDRAW X5 and need to make some minor adjustments to these bevels.
But I can't seem to bring upp the bevel properties anyway and of course canät edit them either.
How can I at least SEE what properties/params were used for those bevels?
It's OK if I can't edit them (even if that would be preferable). As long as I can get to see the properties that were used, I can remove the old ones and create new ones with the same properties (with the required adjustments).
I note that in the object manager, the old bevels appear as "Bevel group" (but in Swedish), while new bevels appear as "Bevel", and the little icon in the object tree is different. The old ones have an icon that would seem better suited for an extrude.
View 4 Replies
View Related
Dec 17, 2012
A graphic exported in Draw & PP in X4 as a .png works fine.
The same graphic copied & pasted into Draw or PP in X6 does not.Repeatable 100%...The eyedriopper selection of the transp[arent color seems to pick up the right color, but the output presents like a .jpg. Viewed in IE9, Firefox & Chrome with same results.
View 11 Replies
View Related
Sep 3, 2013
Is there a way to control the layer transparency in CorelDraw 5? We often have control objects we need to superimpose over the actual drawing object, but want to see through the control object (on a higher layer) so we can align the actual drawing beneath the control layer.
View 14 Replies
View Related
Nov 30, 2012
Adding transparency to an object makes Photo-PAINT render it falsely. It's getting rendered almost completely transparent.
Exporting the image shows that the alpha channel should not be applied as much as Photo-PAINT wants you to believe.
I've set the object's transparency to 18% after adding/combining a drop shadow to it.
Original object:
Object after having set its transparency level to 18% (it's falsely displayed almost invisible):
Exporting the image to PNG format:
Resulting image when rendered in Internet Explorer 9:
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
View 1 Replies
View Related
Jul 9, 2013
This is my first post in the Corel forum and I hope I did it all right here:
First Bug -> In my last contest work I've tried to embed many transparency effects. While I designing my graphic I've used (among many others) a transparency effect that named »Behind« (in my German version of CorelDRAW it's named »Hinter«). I've applied that effect to a texture bitmap graphic and it worked correctly so long the bitmap overlaid a vector shape in an ordinary way. But after I include the bitmap into the vector shape (using the vector shape as a Power Clip) obviously the used transparency effect conflict with the anti aliasing function of the vector shape and the smooth margins of the vector shape turned into rough boarders and the vector shape looked like a bitmap in a poor resolution. I guess it is only an indication error in CorelDRAW but for a designer's eyes this bug is very disturbing and should be corrected by Corel!
Second Bug -> Often I use CorelDRAW for vector illustrations and that's why I have to integrate scanned sketches (JPEG format) to build vector illustrations bases of it. Here we have another indication error or better to say a performance problem of CorelDRAW. While I using the sketch image in extended view mode the zoom function of CorelDRAW works correctly and pleasant fast. But if I switch to simple contour mode the performance of zoom mode of CorelDRAW worsens rapidly. The performance of my computer is not the problem with this because my hardware is on a high level and I use an well arranged and clean Windows 7 operating system. It would be nice if Corel is able to fix that problem because it disturbs the work flow enormous and it minishs the fun that I have while I'm using CorelDRAW!
View 3 Replies
View Related
Jan 26, 2012
We have an issue happening on many of the documents that we have that include a transparency or gradient. We did not have these issues in Draw12. (but did have printing issues)
1st issue: Opening these gradients will randomly flip them. Like so:
The bottom image is correct. Now when we print them from Corel Draw X5 to either of our printers (Bizhub C250, or Biizhub C360ps) we get the following (this is created from the same master file, same settings):
Notice the lens effect color replacement is gone, and the bottom gradient is barely visible, the top one not working at all.
Same document, saved to 12 and printed the same way:
Both sent with identical printers settings, same print driver, and as close as possible settings in the X5 and Draw 12 dialog print boxes.
View 14 Replies
View Related
Sep 9, 2013
I have been getting an immense number to images lately that have that wonderful white background.
I simply use the masking tools and cut/paste back into Draw to get a transparent background, but it is time consuming.
Any way to do this with Replace Colors?
View 3 Replies
View Related
Mar 24, 2011
In CD, the arrow on the right is the original. Then I applied convert to bitman and got what is on the left.
Why shadow is gone, why the fontain fill (white) become transparency?
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
View 10 Replies
View Related
Jun 13, 2011
I have about 8 squiggles that are quite wide. I use the transparency tool in radial or conical mode... the center position matters, but it seems like essentially the same transparent effect stays regardless of the distance of the radius laid down by the tool. the little slider bar seems to do something, but I'm trying to get the transparency to go out more... but the radius doesn't change the transparency effect.
This seems like a bug. Why wouldn't the distance from the center to the edge matter?... the distance matters when it's working in linear transparency mode.
View 3 Replies
View Related
Jul 30, 2012
If this is possible to have a transparency brush in doing fades on curves. the brush would enable to lighten spot colors when brushed over the curve or curves. you could make a whole graphic fade out around the edges just by brushing over the edges.
You could have the capabilities to adjust the amount of the fade on a tool bar. maybe this is out there, but it would save a lot of time when doing graphics for t shirts and you want to fade the edges of the image on the shirt. you rip program would define the half tones by the transparency fade.
View 3 Replies
View Related
Jun 10, 2013
I would like to apply a transparency to some brush strokes. But when I click on a group of brush strokes, or select a single brush stroke, I can not start a transparency, or I get an error that there are too many objects.
I have some brushes that emulate smoke, but I would like to ad transparency to them.
View 2 Replies
View Related
Dec 12, 2011
I have a problem with Corel Draw x4 .eps exporting.When i exported graphic elements what contains gradient or transparency effect in eps format these elements appears broken or destroyed. how can i export this graphics correctly with CDRx4.
View 1 Replies
View Related
Nov 22, 2011
I have a curve fill with K100 and 50% transparency placed on top of a solid color background. [TOP]But when I turn the proof color on, or export as CMYK JPEG, or PDF, the result is as below. [BOTTOM]
View 6 Replies
View Related
Mar 23, 2011
I tried to apply a transparency to a beveled rectangle and was unsuccessful to get any effect to apply. Tried to make the bevel first and then apply transparency and vice-versa, a transparent rectagle and tried to do bevel effect. Neither way would work.
Don't they play nice together, or do I have to try it in PP?
View 13 Replies
View Related
Jun 19, 2013
Is there any way to quickly apply uniform transparency at a given percentage, without going through the properties bar?
View 5 Replies
View Related
May 13, 2012
i have that issue i made one flyer w X4 where exist a bitmap that must be to the edge of cutted paper , so i made it bigger out of page, i close it to PDF for my printer adding a bleed limit, everything else out of page (inside the bleed ofc) appear BUT the bitmap (lens) stop to the edge of page.
View 12 Replies
View Related
Sep 17, 2011
have to select an object under an artistic media brush object. i try hold down alt key when select the object under the artistic media object but it select the second object
View 2 Replies
View Related
Dec 9, 2012
Is there a way to exclude single attributes from being defined in a object style? As example: i want to define an outline that does not change width of the objects, but everything else.
There is a small tick box right of every attribute with help text "None this object attribute is not defined by a custom style" but i can not mark it. My feeling is, that i need to switch on this tick box to get the result i need, but i can not. When i click on it, it just gives me a greyed out "Revert". When i try to make child styles, there is a way to break the connection to parent style with these tick boxes, but no luck.
Is it a bug? I tried it with X6, X6.1 and X6.2
View 1 Replies
View Related
Jun 6, 2011
Can you apply tranparency to a stroke made by artistic media? his seems like it should be possible... I've been told to use the transparency tool for my type of transparency needs... but I can't find a way to get this to work. It would be handy... in PS, you just adjust the transparency slider for the object or layer. In Draw, how is this done specifically for an artistic media brush stroke?
View 1 Replies
View Related
Dec 3, 2013
I've created a simple graph of an area painted with some transparency in Origin Pro 9.1(such as this: URL..... and copied and pasted it on a blank CorelDraw X6 file. The area in the embedded image looks checker board pattern, not transparent as in the original image.
The problem appears to be within CorelDraw, as the embedded link to Origin software works fine, and an embedded image of the same graph in Microsoft PowerPoint looks just fine.I've tired combinations of earlier Origin versions (9.0, 8.5) , CorelDrawX3, XP and Windows7(32bit, 64bit). All failed.
View 3 Replies
View Related
Nov 28, 2012
I have a file set up that has a white box with a 65% transparency lens. When I go to print, the white box and what's under it disappear and do not print. If I close the document and reopen it, the transparent box and what under it are back.
What do I need to do so this doesn't happen?
View 10 Replies
View Related
Sep 14, 2012
In X5 is there a way to change the size of the centre 'white' spot when using transparency or is it always proportional to the object size?
View 3 Replies
View Related
Mar 30, 2012
transparency bug.jpg.....transparency is not applying properly for the inverse white to black gradient, check the attachment.
View 12 Replies
View Related
Jan 30, 2012
I have a CDR project I am working on. As I work, I occasionally click the "save" icon to save the work. When I am finished for the time being, I am unable to click on either the "X" or "Exit". The program doesn't respond, and I have to go to the Windows Task Manager to shut down CorelDraw. Because of this, the work is not saved. I have Windows 7, and I also have all of the X5 updates installed.
View 5 Replies
View Related
Apr 3, 2013
I am running CorelDraw X6 and I am having a strange issue. I have it installed on a PC with windows 7 64 bit, and CorelDraw is also 64 bit. The issue is that when I have a string of text and I try to edit it via the "edit text" box, it wants to shift the text down a row after closing the box. so if I open and close the edit text box lets say 5 times, the text will be dropped down 5 spaces. This problem does not occur if I use the text tool on the left side toolbox, only if I use the edit text box. Also, I have another PC with almost identical hardware, and it does not have any issues. I have tried installing .NET, C++, and many other tricks to try to fix it. I have reinstalled CorelDraw, and I have up to date drivers for my graphics.
View 2 Replies
View Related
Aug 29, 2011
Any success in using Photopaint or Draw to edit PDF's within Acrobat.
I have Acrobat Pro 7.0. When I change the preferences to use PhotoPaint/Draw Acrobat will open the object and I can edit but when saving it wants to save to a new file - not back into the PDF.
View 3 Replies
View Related
