transparency bug.jpg.....transparency is not applying properly for the inverse white to black gradient, check the attachment.
View 12 RepliesI have a problem with Corel Draw x4 .eps exporting.When i exported graphic elements what contains gradient or transparency effect in eps format these elements appears broken or destroyed. how can i export this graphics correctly with CDRx4.
View 1 Replies View RelatedI have been getting an immense number to images lately that have that wonderful white background.
I simply use the masking tools and cut/paste back into Draw to get a transparent background, but it is time consuming.
Any way to do this with Replace Colors?
I have a file set up that has a white box with a 65% transparency lens. When I go to print, the white box and what's under it disappear and do not print. If I close the document and reopen it, the transparent box and what under it are back.
What do I need to do so this doesn't happen?
In X5 is there a way to change the size of the centre 'white' spot when using transparency or is it always proportional to the object size?
View 3 Replies View RelatedI would like to scan some original pen and ink drawings I do and I'd like to remove the background once they are on the page so I can manipulate the art. I work in Corelx4. Will this same technique work with book pages scanned in?
View 1 Replies View RelatedI need to screenprint a portrait/photograph in white onto a black t-shirt & am wondering the best way to do this.
View 4 Replies View RelatedI am new to the forum and new to CorelDRAW X5. I use CorelDRAW to laser engrave text and logos through an engraving machine. Most basic logos are easy to convert right through CorelDRAW, but today I ran into a serious issue.
I received a logo that was very detailed in color and also had numerous different shadows in it. When automatically switching to black and white, the colors get very warped and the shadows take over the entire logo.
How do you go about switching a logo like this to black and white?
I want to colour just parts of an old black and white photo and add very subtle pink cheeks to the subject.......how can I do this in photo paint.....
View 7 Replies View RelatedThe user is having a problem with imported jpgs. When she creates a Corel document, she usually imports a jpg as a background, then places text over it. When she prints, the text created in Corel is in color, but the imported jpg is B&W. The issue just started. She has used Corel 11 for some time.
View 2 Replies View RelatedHow can I apply edited paragraph style to all at once.
I mean I have created new paragraph style with 10 pt Arial font and applied to different paragraph. And now I have edited the same paragraph style with 16 pt. Arial font, now how it will applied at once to all old style that I have used.
I was doing some "sphere-ology" and wanted to overlay a bitmap pattern. I tried to use a Fish Eye lens on a bitmap to give it some shape before applying it, but it does not seem to work. It will cut out the shape, but no distortion is applied.
I found this thread from a couple of years back on X5. There was no resolution.
Should this work on a bitmap?
I'm running X6, 64-bit on Win-7.
In coreldraw 12 there used to be a drop down menu for applying styles. in coreldraw x4. where is it?
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
I have a macro to set text attributes. The code I use is shown below and works fine.
Some fonts have attributes with other names such as 'Black', 'Black-Italic', 'Normal-Italic' etc. I would like to be able to set these attributes.
Set s1 = ActiveLayer.CreateArtisticText(0, Position, "X")
Set txt = s1.Text.Story.Paragraphs(1)
txt.Bold = True
txt.Italic = True
1. Black drop shadow does not appear black when Publish to PDF
2. The object beneath the drop shadow will appear as show below:
I've tried to convert the drop shadow to bitmap but the result is same.
When I import an eps, or create a new object with a shape tool. The default style is a clear fill and a hairline CYMK black (0,0,0,100) outline. I think I know how to change it to true black (0,0,0,0), but when i import an eps or an illustrator file, it is coming in as CMYK black (0,0,0,100)
View 2 Replies View RelatedWe have a new Roland printer, an LEJ-640, which prints in CMYK plus white and clear gloss.
In order to print a white bitmap, I must apply a spot color to the bitmap. I used the Bitmap|Mode|Dutone to apply the white spot color and it seems to work correctly--it shows up as a spot color when I use the print dialog to preview separations.
When I use either print to file with the RolandVW print driver or File|Publish to PDF, the spot color on the bitmap is not preserved, Versaworks does not recognize it as a spot color. Color output is set to "Native". However, a vector object on the same page with the same spot color applied is recognized as a spot color.
The pink part in the versaworks screenshot indicates white spot color, as you can see only the vector object is recognized.
OS: MS Windows7 Ultimate x64, v6.1.7601 SP1 build 7601
PC Config.: Intel Core2Quad CPU Q6600 @ 2.4GHz, DG33FB, 8GB RAM
CDGS x6 (64 bit) v16.0.0.707
1. Facing problem of frequent CorelDraw X6 crash while working and seemingly most of the times it even don't sent any error messages to Corel support.
2. Transformations docker doesn't accept enter for applying changes, it only responds when we hit apply. It is good to move through options by using TAB, but it should accept ENTER as “APPLY” as we make desired change in any parameter. Mostly I prefer dockers to property bar.
3. Open and Import dialogue boxes don’t get cancelled as we hit ESC key.
4. Using pick tool double click a group of objects including paragraph text and get desired rotation is still a havoc despite we are using x6 (64-bit). It kills much of our time. See screen shot below:
5. I am also facing problem in EPS editable import as shown in the screen shot below "An error occurred while processing PIEE.eps. The file cannot be opened."
The file is created in x6 and has 2 pages for two print jobs. Both pages has flatten background text and fountain lenses to RGB bitmap. All texts converted to curves. Page 1 exported to EPS and then imported as EPS editable successfully. Page 2 exported to EPS and then imported as EPS editable - shown above error. I have also tried importing this page to a fresh file and then created fresh EPS but got the same erroneous result.
As far as my experience with PDF is not good, because sometimes PDF also produces undesired result on RIP specially as RGB images, bar codes, drop shadows etc. I believe that EPS files are far more reliable in prepress jobs.
Suddenly, CorelDraw X4 is not reading all my fonts properly. I can select them from the list in a document, but all I get is a box and no text in it. I am running XP on this machine.
View 13 Replies View RelatedI've just installed Corel X3. When I open a corel 12 document from my second computer, my new Corel x3 doesn't show most of the objects. Instead - it only shows "ghost" objects. I have made a print screen and it looks like that.
View 14 Replies View RelatedA graphic exported in Draw & PP in X4 as a .png works fine.
The same graphic copied & pasted into Draw or PP in X6 does not.Repeatable 100%...The eyedriopper selection of the transp[arent color seems to pick up the right color, but the output presents like a .jpg. Viewed in IE9, Firefox & Chrome with same results.
Is it possible to create a gradient without the one on the top. See the x on the image.
[URL].........
I have a background image with Linear transparency applied on the top of my image. I would like to replicate the same transparency on the bottom of the image. How can I do this?
View 4 Replies View RelatedIs it possible to do transparency all around the edge of an object. say you had drawn a circle can you make the edge all around transparent or say make just the middle transparent?
I often find that I would love to fade out in more than one direction.
[URL]......
Is there a way to control the layer transparency in CorelDraw 5? We often have control objects we need to superimpose over the actual drawing object, but want to see through the control object (on a higher layer) so we can align the actual drawing beneath the control layer.
View 14 Replies View RelatedAdding transparency to an object makes Photo-PAINT render it falsely. It's getting rendered almost completely transparent.
Exporting the image shows that the alpha channel should not be applied as much as Photo-PAINT wants you to believe.
I've set the object's transparency to 18% after adding/combining a drop shadow to it.
Original object:
Object after having set its transparency level to 18% (it's falsely displayed almost invisible):
Exporting the image to PNG format:
Resulting image when rendered in Internet Explorer 9:
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
This is my first post in the Corel forum and I hope I did it all right here:
First Bug -> In my last contest work I've tried to embed many transparency effects. While I designing my graphic I've used (among many others) a transparency effect that named »Behind« (in my German version of CorelDRAW it's named »Hinter«). I've applied that effect to a texture bitmap graphic and it worked correctly so long the bitmap overlaid a vector shape in an ordinary way. But after I include the bitmap into the vector shape (using the vector shape as a Power Clip) obviously the used transparency effect conflict with the anti aliasing function of the vector shape and the smooth margins of the vector shape turned into rough boarders and the vector shape looked like a bitmap in a poor resolution. I guess it is only an indication error in CorelDRAW but for a designer's eyes this bug is very disturbing and should be corrected by Corel!
Second Bug -> Often I use CorelDRAW for vector illustrations and that's why I have to integrate scanned sketches (JPEG format) to build vector illustrations bases of it. Here we have another indication error or better to say a performance problem of CorelDRAW. While I using the sketch image in extended view mode the zoom function of CorelDRAW works correctly and pleasant fast. But if I switch to simple contour mode the performance of zoom mode of CorelDRAW worsens rapidly. The performance of my computer is not the problem with this because my hardware is on a high level and I use an well arranged and clean Windows 7 operating system. It would be nice if Corel is able to fix that problem because it disturbs the work flow enormous and it minishs the fun that I have while I'm using CorelDRAW!
We have an issue happening on many of the documents that we have that include a transparency or gradient. We did not have these issues in Draw12. (but did have printing issues)
1st issue: Opening these gradients will randomly flip them. Like so:
The bottom image is correct. Now when we print them from Corel Draw X5 to either of our printers (Bizhub C250, or Biizhub C360ps) we get the following (this is created from the same master file, same settings):
Notice the lens effect color replacement is gone, and the bottom gradient is barely visible, the top one not working at all.
Same document, saved to 12 and printed the same way:
Both sent with identical printers settings, same print driver, and as close as possible settings in the X5 and Draw 12 dialog print boxes.
I got calls from 3 of the DRAW users that some of the fonts are not displaying correctly since they have updated their Windows today. I have not yet connected my laptop to internet. Shall check it and try to identify the culprit update.Few fonts known for not displaying correctly since today.
View 24 Replies View RelatedI want to know if is there any soft eraser, like brushes, with gradient around the center point of eraser, like in Photoshop.
View 7 Replies View RelatedIn CD, the arrow on the right is the original. Then I applied convert to bitman and got what is on the left.
Why shadow is gone, why the fontain fill (white) become transparency?
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64