I was doing some "sphere-ology" and wanted to overlay a bitmap pattern. I tried to use a Fish Eye lens on a bitmap to give it some shape before applying it, but it does not seem to work. It will cut out the shape, but no distortion is applied.
I found this thread from a couple of years back on X5. There was no resolution.
Should this work on a bitmap?
I'm running X6, 64-bit on Win-7.
i have that issue i made one flyer w X4 where exist a bitmap that must be to the edge of cutted paper , so i made it bigger out of page, i close it to PDF for my printer adding a bleed limit, everything else out of page (inside the bleed ofc) appear BUT the bitmap (lens) stop to the edge of page.
View 12 Replies View RelatedI made a menu card cover using lens effect...but converting this design to CMYK/ RGB Bitmap show varied color?
View 1 Replies View RelatedI am currently using this method, creating a 1-bit bitmap from a grayscale "distress" texture bitmap, choosing transparent fill or outline depending on which area i need trasparent and powerclip it in text or other vector object.
Is there a way to achieve the same distress effect with transparency with FILL ? pattern fill maybe? eg can i save in some format this bitmap to use it maybe as a pattern in pattern fill and retain transparency ?
sample file (X4)
Every time I try to generate a bitmap with 300 dpi in x6, he disappears
View 14 Replies View RelatedWe have just purchased X6 and are having difficulty editing a bitmap. Its unable to be selected.
After reading your posts here we have tried the following which we find quite annoying for a new program.
Surely this is something simple we have missed. All we have done is installed the X6 and run the program , clicked on a bitmap and nothing ??? This has really left a bad experience especially when we just purchased this program and it cant even edit an image. The customer support was terrible , I had to ring back because the person couldn't hear me about 8 times. It was only a search on the web that led me here.
I got a new MAC OS X 10.6.2 last spring and installed the CorelDraw 11 that I've used for several years on my other MACS. When I try to use a bitmap effect from the drop down menu (like 3D effects, art strokes, creative, contour etc...) the boxes do not open. I've tried reinstalling the application and it didn't work. I was always able to use these effects on my other computers. Every other menu item I use works. I wish Corel would make something new for MACs
View 1 Replies View RelatedHow to use Lens Dockers in CDR X5.
View 4 Replies View RelatedHow can I apply edited paragraph style to all at once.
I mean I have created new paragraph style with 10 pt Arial font and applied to different paragraph. And now I have edited the same paragraph style with 16 pt. Arial font, now how it will applied at once to all old style that I have used.
In coreldraw 12 there used to be a drop down menu for applying styles. in coreldraw x4. where is it?
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
MGD 64 lemonade to forum.cdr
This isn't something I am in need of because in the future with this graphic I would just convert the background. Just wondering why it made those odd lines coming off of the words and the black bar (I don't know how the heck you guys can post large things, things with motion, etc. I have to make things miniature to put them on here)
I assume it has something to do with how the original, that came from MillerCoors, has those layers of lines in it. I just don't get why lines would then be visible when I changed it since nothing like that has happened before. Oh, and if you are wondering why I converted it, it's because I knew my rip server wouldn't like all that stuff going on in the original
Contour on a bitmap shape.
I thought this was doable. Today I found it's not, or stopped working.
"The best thing about learning is that it never stops, and the rabbit hole will go as deep as you let it.[URL]
Does exist this macro for X5:
[URL]
I'm trying it but it doesn't work for x5, and my previous version of Coreldraw is 10,
I've got Service Pack 3 which is the latest and greatest and am still finding that I cannot export to any bitmap format even in PhotoPaint. I can save as a .cpt file in PhotoPaint. Sometimes I send out .jpeg proofs and doesn't matter whether it is X5 Draw or PhotoPaint, it crashes.
I do not have this problem when I export the same thing from X4 Draw or PhotoPaint.
I am running XP on a virtualized Windows environment via Parallels desktop for Mac. I have plenty of RAM and hard drive space so it may be because I am not running Windows 7?
When having photos in CorelDraw, I need to edit them so I right click on the photo and select "Edit Bitmap". I am not too familiar with Photo-Paint, and wonder if I could link to another application (ie photoshop) to make my bitmap changes.
View 4 Replies View RelatedWhen working in CDX5, PP is used to edit bitmaps in the file. Is it possible to configure CD to use a different bitmap editor so that I do not have to export edit and re import into CD?
View 1 Replies View RelatedMarshall's Burger Logo (Red Background).pdf
I receive a PDF file from my client which is their logo.
The text is suppose to be vector, but they appear as bitmap and I cannot apply fill and outline to it.
I can edit the nodes with the Shape Tool after I converted it to AI or EPS format, but still cannot apply fill and outline.
If I have a bitmap image that has been cropped to an irregular shape (say a star or pear etc) is there any way in CorelDraw to replace the image without having to crop and position the bitmap all over again. I thought It would be as simple as clicking edit bitmap & pasting the new image once in corel photo paint but that does not seem to be the case.
edit: also is it possible to swap the image with a higher resolution version.
I have recently created a macro in coreldraw x6 but after running this macro When I export through Publish to PDF bitmap in the document deleted in PDF file.
View 5 Replies View RelatedHow do I make a bitmap become transparent using CorelDraw and Corel Photo Paint?
View 1 Replies View Relatedi want to change the color of a bitmap that i hav in the cdr 11.
1st i draw a circle, then fill any color. then i turn that circle to bitmap by click the option "Covert to Bitmap" as RGB with 300dpi. Then i select that image, then i go to " Bitmap - Creative - Scatter". Now the image is show with edges scattered. After all these ladder i want to change the color of that image by right click on mouse from the color palatte. someone says, go back and change the color and do all these ladder. Its very difficult. i had seen this thing when i went to a printing firm near by.
RGB Image.jpg
I'm using X5. I need to recolor the attached image from its current color to CMYK 15, 85, 53, 54. Is there a simple way to do this and retain the light colored styrations throughout the image?
I am using Corel Draw X4 to create stuff to cut on a laser engraving system and am having trouble with the bitmap trace function. For example: I create a line of text. First, I convert it to a bitmap. Then I trace the bitmap using the logo option. After doing this, when I move the text on the page, it appears several of the letters (the tall ones like capital letters and so forth) are missing during the moving process, but when I stop moving it, they appear again.
My problem is when I save the file and then open it in my laser program, these missing letters that are present when I move the text in corel draw translate into missing letters in the laser program, so it seems this is a Corel Draw problem but I don't know how to get rid of it.
i backup my files and now when i want open them see this message
error reading a bitmap in file......
this is my sample file
[URL].....
my old corel was X3 and now cant open with X5 sp 3 or X3.
my system is:
windows 7 x64
4GB ram
cpu intel core i5 760
I created a bitmap in draw 15" x 131" then right clicked the image and selected "Edit Bitmap". The image grew to 19" X 131"... I did this again just to verify and got the same results. I resamled the image back to 15". This is a big concern as we process all our printed images this way.
View 17 Replies View RelatedThere are:1. Linked .jpg 91x141mm 600dpi, RGB - bad preview.2. Near the Linked .jpg 177x177mm 150dpi, RGB - good preview.
CDR Document is 150dpi, RGB.For good preview needed exact dimensions and resolution?
How do you get rid of a lens effect? I've looked throughout the program and cannot find how to get rid of the stupid lens. I want the object to be solid.
View 7 Replies View RelatedI have an existing X6 document which has a rectangle object with a Lens attached.
I did not create the document, so what sort of lens it is and what settings the lens has. I suspect it is a transparency lens.
I cannot find any way to locate the settings for this lens - so that I can reproduce and modify the lens settings. Where i can find the settings for the lens?
I am trying to export my Corel Draw project to a PDF. Everything works as expected except all Curves with lens are not showing up at all in the exported PDF.
I have tried opening the PDF with several different programs with the same result. I have also tried changing the PDF export settings but haven't had any luck.
We have a new Roland printer, an LEJ-640, which prints in CMYK plus white and clear gloss.
In order to print a white bitmap, I must apply a spot color to the bitmap. I used the Bitmap|Mode|Dutone to apply the white spot color and it seems to work correctly--it shows up as a spot color when I use the print dialog to preview separations.
When I use either print to file with the RolandVW print driver or File|Publish to PDF, the spot color on the bitmap is not preserved, Versaworks does not recognize it as a spot color. Color output is set to "Native". However, a vector object on the same page with the same spot color applied is recognized as a spot color.
The pink part in the versaworks screenshot indicates white spot color, as you can see only the vector object is recognized.
Ok so I have x3 and recently installed the trial for x5, since the trial ran out i removed it and carried on as before, this however has left a few things buggy, the first was file assocation which was easier to fix, the other biggie is that I seem unable to edit any bitmaps using the usual method. How do I re-enable the bitmap editing? and if i have the choice I'd rather it opened photoshop to edit the file opposed to corel paint if this is at all possible?
View 9 Replies View Related