I have an existing X6 document which has a rectangle object with a Lens attached.
I did not create the document, so what sort of lens it is and what settings the lens has. I suspect it is a transparency lens.
I cannot find any way to locate the settings for this lens - so that I can reproduce and modify the lens settings. Where i can find the settings for the lens?
For the purpose of backup, where on my drive is the file containing workspace customization settings stored?
View 9 Replies View RelatedHow to use Lens Dockers in CDR X5.
View 4 Replies View RelatedHow do you get rid of a lens effect? I've looked throughout the program and cannot find how to get rid of the stupid lens. I want the object to be solid.
View 7 Replies View RelatedI am trying to export my Corel Draw project to a PDF. Everything works as expected except all Curves with lens are not showing up at all in the exported PDF.
I have tried opening the PDF with several different programs with the same result. I have also tried changing the PDF export settings but haven't had any luck.
I was doing some "sphere-ology" and wanted to overlay a bitmap pattern. I tried to use a Fish Eye lens on a bitmap to give it some shape before applying it, but it does not seem to work. It will cut out the shape, but no distortion is applied.
I found this thread from a couple of years back on X5. There was no resolution.
Should this work on a bitmap?
I'm running X6, 64-bit on Win-7.
i have that issue i made one flyer w X4 where exist a bitmap that must be to the edge of cutted paper , so i made it bigger out of page, i close it to PDF for my printer adding a bleed limit, everything else out of page (inside the bleed ofc) appear BUT the bitmap (lens) stop to the edge of page.
View 12 Replies View Related I work in pre-press for a Label Printing company and we do Flexo and Screen printing. I get files from designers, most files have been created in Illustrator.
I use Corel Draw X5 to do my pre-press work and some of the files I get have Lens effect objects. When I apply the "No Lens Effect" the object changes to a Symbol and it has no fill and no outline, how do I convert the Symbol object to a "regular" object?
I want to know the best way to convert these Lens and Symbol objects to regular objects that are "flattened" or do not have transparency. I need to be able to work with these objects like they are a regular vector object that can be edited for pre-press to make files to send to have films output.
OR, will an object that has a Lens effect output normally if I make a Postscript file fro the Lens effect object? Do I even need to convert the Lens effect in order to get the image to output correctly?
I made a menu card cover using lens effect...but converting this design to CMYK/ RGB Bitmap show varied color?
View 1 Replies View RelatedI have a file set up that has a white box with a 65% transparency lens. When I go to print, the white box and what's under it disappear and do not print. If I close the document and reopen it, the transparent box and what under it are back.
What do I need to do so this doesn't happen?
How can I determine "Tab Settings" with 5 mm - as my default?
It does not glue when I change such preference and use "Save Settings as Default"? When I reopen Draw it is back to 10,0 mm.
This may be a silly question but I cannot find where to import all my custom keyboard shortcuts from X5. Is this doable?
View 3 Replies View RelatedI managed to get a nice set of different settings to publish a corel file to pdf. Now I would like copy these settings to multiple other pc's in the office. where a can find the file/folder in which these settings are being saved?
Otherwise I would have to set all different pc's individually and I rather spend my time otherwise.
X3 - I use X4 at work with no problems but at home I have X3. I set my workspace the way I want it and all my presets the way I want. I hit tools/save stings as default. I then save my workspace as todays date. Close corel and reopen. It starts with the defaults every time! I have to manually choose my workspace and even after doing so my settings have reverted back to default i.e. text to be point not inches like I chose etc.
View 3 Replies View RelatedSo in document color settings in color management, should the primary color mode be RGB or CMYK? I only print inkets and never send stuff out to a regular printer.
should all color settings be at RGB if the option is offered?
When you save a PDF preset it says 'security settings are not saved with PDF preset' is there anyway to change this, i want to save the security setting so i don't have to set a password each time i save it, i make dozens of PDF proofs a day and its a pain having to set it every time i publish to PDF.
View 2 Replies View RelatedI use CorelDRAW X4 exclusively (90%) for Laser work. I have a Page saved as Laser Page. It use to open with a 24 x 12 page area and Horizontal and vertical guidelines in place. It is set to "show guidelines."
However, every time I open a new document, the page layout and guidelines are not there. I always have to rebuild the page and add the guidelines. What has changed so that all I get is a blank page anymore? Or how to reestablish my defaults? I have re-saved it as my new default countless times but nothing sticks. It's a pain to have to always reestablish the layout I want to work with..
I've noticed that DRAW seems to forget whatever settings I choose for duplicate.
So, I found the following in the index:
"Copying objects quickly. You can use other methods to create copies of objects quickly, without using the Clipboard. You can use the plus sign (+) on the numeric keypad to place a copy of an object on top of the original object, or you can create copies instantly by pressing the Space bar or right-clicking while dragging an object."
The + sign thing is cool. Wish I had known. But the Space bar drag either doesn't work at all or puts down one copy at what is apparently a set distance from the original, and then a second copy wherever I release the mouse button. ? Win7, DRAW X6.
I have been drawing the drafting lines and measurements manually and noticed the dimensions tool. Works great but when I shrink the layout for proofing the measurements change. Is there a setting that I can select that will keep the actual measurements of the drawing no matter how I resize it for proofing?
View 9 Replies View Relatedbug-2.jpg
See the red marked area, where it is not accepting to select the rgb or cmyk. Only accepts the Lab only. It is changing the X5 but not in the X6.
Is there a good (better?) way to find a local printer? I am just starting a desktop publishing business, part time, out of my home and I would like to find a good local printer in the Calgary, Alberta area. Do I just go thru the yellow pages and try my luck?
View 2 Replies View RelatedWhy does the find and replace functionality have to be so sloppy to use? I have a customer that sends me cmyk drawings and I need them to be rgb. They also have lines that need to be changed to hairline from .25pt. It's frustrating how difficult this is to accomplish due to the sloppy interface that CD has had ever since I've been using it - since v12.
How hard would it be to allow you to change the palette, line width and colors on lines and outlines in one step? Right now it's multiple steps and don't forget once to change the target color palette or you'll convert everything back to cmyk...
I used the "find and replace text" and although my spelling was correct, it dindn't "find" it... But now the box wont go away and I cannot do ANYTHING on my page!!!
View 2 Replies View RelatedI just started using CorelDraw X5 (previously used version 10 or 12) and I can't find the Bezier tool. When I watch tutorials it looks like it should be under my curve tools, but it definitely isn't. Do I have a setting turned off or something... or is this a glitch?
View 10 Replies View RelatedI just got a new system installed corel draw fresh, loaded all my gms's , imported workspace , great all work as before all my menus are nice and active...,
However my custom gradients have disappeared..., it took me a while to set up certain gradients and I removed lots of the useless default ones that were there preset in the previously installed corel draw.
I accessed my old hard drive and found the gradient preset file however when I copied and replaced with the old gradient file the gradient data is not there....
location C:Program FilesCorelCorelDRAW Graphics Suite X6DrawPresetsStyles - FountainFills.cdss
is there another location where my old gradients would be saved?
good procedure to scan pages from a book on a flatbed scanner and edit the resulting file in Corel Photopaint (PP).
My situation is the following: The book contains text as well as images. The final image, after scanning and editing in PP should look good when printed on my simple desktop B&W laser printer but also look well when placed in a document for viewing on the computerscreen. The latter require colors.
My experiences so far: Usually I scan from PP using 600 dpi, to make the text look good on print. Often I get text prints which are not that nice, because in the rasterization which is taking place when my image is printed on my laserprinter in B&W it contains white pixels in the text sections. I can see them when using my 8x Horizon magnifying glass. I guess it is because I need to use pure black in RGB. What are the optimal color settings for my document? (Color Management setting ...). What I usually do when editing the images in PP is that I want to remove the often greyish areas around the corner of the page and make the text stand more black and crisp. To do so, I out-mask the images to not destroy them. Then in the Image Adjustment Lab window I use the "Select White Point" and "Select Black Point" to make the background behind the text white and to make the text more black. Sometimes I also use "Contrast Enhancement". Afterwards I sometimes use the "Invert Mask" tool to improve the images a little.
I am interested in the best settings for my document (Color Management) and a working process which means my scannings and editing can be accomplished in a decent time with a relative high degree of quality.
Will I lose my workspace or CM settings when installing from 16.1 to 16.2?
Right now everything is running somewhat smoothly for me and I'm wondering if I should even bother upgrading?
Ideal color settings for exporting .jpg and .eps files for CMYK printing? The default X6 settings result in rather washed out looking exports (both on the screen and on the prints). Black looks very dark grey etc.
Never had this issue with X3 but I understand that X6 uses a totally different color engine so I figure I just need to know the correct settings.
I have just purchased Corel draw x5 and need to change the colour management default settings but when i go to tools, colour management, i only have document settings! I have done this with new pages, old pages, images on pages etc and no luck.
View 6 Replies View RelatedHow do I go about saving the settings on the open dialog box? It keeps moving to different locations and it keeps changing the Name / Date modified / Type / Size columns very narrow where it only shows the name and nothing else.
I do have the dialog box very large across so it can accommodate what I want including the preview.
I just create a few objects in the symbol manager, now I want to send those contents I createt to a friend. But I cannot find my library/symbols folder in the Corel Draw folders.
View 1 Replies View Related
