bug-2.jpg
See the red marked area, where it is not accepting to select the rgb or cmyk. Only accepts the Lab only. It is changing the X5 but not in the X6.
I have just purchased Corel draw x5 and need to change the colour management default settings but when i go to tools, colour management, i only have document settings! I have done this with new pages, old pages, images on pages etc and no luck.
View 6 Replies View RelatedWhat is the default color management setting (all the setting) that Coreldraw X5 is set to after installation. We had a tech guy from our local printer chage the values and now we only have problems
View 5 Replies View RelatedSomething has changed dramatically between X4 & X6 when printing color.
Using X4 right out of the box with no "tweaking" all pantone colors print perfect on Xerox 700 Digital Color Press.
Trying to print same pantone colors in X6 with no "tweaking" on Xerox 700 Digital Color Press, color is not even close.
Is there a way to setup X6 to replicate color management of X4.
how can I set the "color management" to the printer to print exactly colors as on the monitor?
View 4 Replies View RelatedFor some reason I cannot get the color management screen to open where you see the printer, monitor, and other things that are located there.
I tried clicked on tools -color management but it opens document setting and that's it.
I am using X-15 and just not sure what I am doing wrong.
I always use CMYK in my designs and the Pantone color codes for their logo design. I have never had to convert them before and have searched forums and boards with no luck in finding an easy way to do this.
View 4 Replies View RelatedThis discussion is on using RGB file creation techniques to output to ink jet devices. I posted the comments below the link because color management off always pops up in the conversation as it turns to non-postscript devices so I wanted to circumvent the side bar conversation.
[URL]....
First let's get this straight, I've written it and said it about a thousand times, you cannot turn off color management.
When you select simulate color management off in the default application color management dialog, CorelDRAW simply utilizes a different set of color management settings. The rules of color management never change! The application requires guidelines on color and still must have rules that govern conversions, PERIOD.
These rules are not different, only the engines, rendering intents and profiles change. These setting in X5 and X6 can be, in some cases adjusted to simulate previous setting in versions prior to X5 that were labeled color management off, but this label in older versions (X4 and older) were deceptive in their nature, color management was never turned off, just set to a specific configuration.
Simulate color management off (in X5/X6) uses wide gamut cmyk simulation as the CMYK profile, it disengages the color engines (setting CorelDRAW to another internally controlled process) and sets the interface to RGB. It does not turn color management off.
These settings have many uses for industries such as laser engraving and screen printing separations and I support their continued use. Do not confuse this and use these settings for professional output using press work, ink jets or digital printers.
Document colors in Corel Draw X3 have changed. Example: dark green is now black on my designed object; Teal is now light green.
I thought it might be color management had switched somehow but all management settings do not make a change as they did before or at all. Basically I think the problem lies in the color management. I re-installed the program but the problem remains. Color management does not affect color appearances as they used too before.I run windows 7 and have had it for a couple of years with no problems.
I have a problem with CorelDraw X6.
When printing 100% black on laser printer the Black is all in raster. Very strange because the same file printed from X4 /same PC and same printer/ is OK and is not in raster.
Probably the problem is somewere in X6.
I don't belive that the problem is in the color management because it's the same as my X5 and there all is OK too.
So in document color settings in color management, should the primary color mode be RGB or CMYK? I only print inkets and never send stuff out to a regular printer.
should all color settings be at RGB if the option is offered?
Ideal color settings for exporting .jpg and .eps files for CMYK printing? The default X6 settings result in rather washed out looking exports (both on the screen and on the prints). Black looks very dark grey etc.
Never had this issue with X3 but I understand that X6 uses a totally different color engine so I figure I just need to know the correct settings.
In my color separations in print preview the "use advanced settings" is disabled.
I have loaded cdr graphics suite 12 on my new laptop w/windows 7, and also on my old machine that I have loaded windows 7 on. Cannot register the program any more due to outdated version. problem exists on both computers.
There are other minor issues but this one I use regularly.
I have more than 1000 installed on an xp system. I know I don't need this many. I'm sure I could get by with 400 or less. How do you thin down your fonts? How many do you try to keep on your system?
What are you using for font management? Bit stream? Something else?
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
We are just in the process of setting up Corel X6 for deployment in our office and we are trying to get a handle on the colour settings. We have upgraded from CD11 which had very little in the way of colour management and so we are somewhat inexperienced in how to set up.
We have two production printers an OKI 821 and a Ricoh C820DN which we print to using PCL drivers. We believe that we therefore need to use RGB as our colour mode and use an ICC profile for each printer for colour correction with colour management switched off on the driver. Is this correct? We've had a try this afternoon and the colours on the prints differ greatly from the display (which has been profiled using an xrite i1pro calibrator). They also differ from each other.
The monitor profile is set as the device profile in the windows colour system, and we are using that as our engine in corel.
I recently purchased an Epson R3000 and am having terrible trouble with the colour management from Corel. Everything I output has a very yellowy/browny caste over it when compared to my screen (for example a slightly warm grey comes out brown-grey and light blues come out very murky in colour tone). I have applied Adobe RGB (1998) to the document, opted for Corel to manage colours and turned off colour management in my printer. I am also using IC profiles specific to my papers. My monitor is self-calibrated but up until now the colour difference between screen and output device has never been a problem.
View 10 Replies View RelatedI run a little print shop as part of our Charity and we produce T-shirts, sublimation mugs and coasters as well as some paper based goods.
I've read a lot about color management but what is the best way to to set up to print to our postscript printers (one OKI 821 & a Ricoh 820DN)
Currently I have the default workspace set to CMYK, sRGB & coated Fogra39 profiles, color engine as WCS, preserve black off and the rest as defaults.
My question is how to set up for printing to postscript? I've read that this is best for color accuracy and allows for different colour spaces with in the same document. We print a lot of cards for local artists whose images are edited in Photoshop and output as srgb jpegs. We then import these into corel and add writing using the standard CMYK palette.
At the moment when we print we have corel set to manage colours, output colours as native as there is a combination of of RGB & CMYK elements. Within the printer driver we set either CM off or ICM managed by host, depending on the driver.
Is this correct? I did have a thought that this combination may mean that effectively there is no color management happening at all!?! It is useful for us to keep the jpegs as RGB because some customers will require their artwork on sublimation items as well which require transfers being produced on a non-postscript device. For these we use a sublimation ICC profile and a PCL driver and it works well.
With postscript I have found that outputting the file as cmyk rather than native dulls the image considerably. However, using native output gives different results from both of our printers.
I recently started working on coreldraw x5, but i am having trouble saving a print style and getting the default colour management settings, i dont know if i missed something or did something wrong, but i dont even have those options on my program
View 1 Replies View Relatedread that color management pdf by gennady petrov and tried a few things he wrote. I turned off color management in the printer driver, chose corel to manage color, and the image default profile sRGBxxxxx. picture was way dark and ugly. tried several other profiles and same dark picture. hmm that did not work so well.
went back to the printer driver and disabled no color management, and chose the profile Adobe RGB. still kept corel as manager and chose A RGB as the profile and the print looked spot on. Have not had problems printing from corel because I have come up with my own system, but was quite surprised at the result from turning off color management in the printer driver.
How can I determine "Tab Settings" with 5 mm - as my default?
It does not glue when I change such preference and use "Save Settings as Default"? When I reopen Draw it is back to 10,0 mm.
This may be a silly question but I cannot find where to import all my custom keyboard shortcuts from X5. Is this doable?
View 3 Replies View RelatedI managed to get a nice set of different settings to publish a corel file to pdf. Now I would like copy these settings to multiple other pc's in the office. where a can find the file/folder in which these settings are being saved?
Otherwise I would have to set all different pc's individually and I rather spend my time otherwise.
X3 - I use X4 at work with no problems but at home I have X3. I set my workspace the way I want it and all my presets the way I want. I hit tools/save stings as default. I then save my workspace as todays date. Close corel and reopen. It starts with the defaults every time! I have to manually choose my workspace and even after doing so my settings have reverted back to default i.e. text to be point not inches like I chose etc.
View 3 Replies View RelatedI have an existing X6 document which has a rectangle object with a Lens attached.
I did not create the document, so what sort of lens it is and what settings the lens has. I suspect it is a transparency lens.
I cannot find any way to locate the settings for this lens - so that I can reproduce and modify the lens settings. Where i can find the settings for the lens?
When you save a PDF preset it says 'security settings are not saved with PDF preset' is there anyway to change this, i want to save the security setting so i don't have to set a password each time i save it, i make dozens of PDF proofs a day and its a pain having to set it every time i publish to PDF.
View 2 Replies View RelatedI use CorelDRAW X4 exclusively (90%) for Laser work. I have a Page saved as Laser Page. It use to open with a 24 x 12 page area and Horizontal and vertical guidelines in place. It is set to "show guidelines."
However, every time I open a new document, the page layout and guidelines are not there. I always have to rebuild the page and add the guidelines. What has changed so that all I get is a blank page anymore? Or how to reestablish my defaults? I have re-saved it as my new default countless times but nothing sticks. It's a pain to have to always reestablish the layout I want to work with..
I've noticed that DRAW seems to forget whatever settings I choose for duplicate.
So, I found the following in the index:
"Copying objects quickly. You can use other methods to create copies of objects quickly, without using the Clipboard. You can use the plus sign (+) on the numeric keypad to place a copy of an object on top of the original object, or you can create copies instantly by pressing the Space bar or right-clicking while dragging an object."
The + sign thing is cool. Wish I had known. But the Space bar drag either doesn't work at all or puts down one copy at what is apparently a set distance from the original, and then a second copy wherever I release the mouse button. ? Win7, DRAW X6.
I have been drawing the drafting lines and measurements manually and noticed the dimensions tool. Works great but when I shrink the layout for proofing the measurements change. Is there a setting that I can select that will keep the actual measurements of the drawing no matter how I resize it for proofing?
View 9 Replies View RelatedI'm not sure what to set my color management settings up as! I've been told a few different things! I shoot in Adobe RGB, but I've been told to set my working space to SRGB and then to set the color management policies to "Convert to working RGB, CMYK, and Gray." Then I've also been told to set the working space to Adobe RGB (1998) and then under "coversion options" change the "intent" to "perceptual." Regardless of which setting I try to use, the coloring when I view it in Photoshop is much more yellow than when I view it on my monitor. I have callibrated my monitor, so I'm assuming the problem is within Photoshop. How do I fix this so that the colors match?
View 8 Replies View RelatedIs there a way to apply a color to selected objects without having to search for the color in the color palette. So say if I am working with an image that has multiple colors but want to use only one of the colors in that image, is there a way to apply it without having to create or add it to the palette.
View 3 Replies View RelatedI just got a new system installed corel draw fresh, loaded all my gms's , imported workspace , great all work as before all my menus are nice and active...,
However my custom gradients have disappeared..., it took me a while to set up certain gradients and I removed lots of the useless default ones that were there preset in the previously installed corel draw.
I accessed my old hard drive and found the gradient preset file however when I copied and replaced with the old gradient file the gradient data is not there....
location C:Program FilesCorelCorelDRAW Graphics Suite X6DrawPresetsStyles - FountainFills.cdss
is there another location where my old gradients would be saved?