What is the default color management setting (all the setting) that Coreldraw X5 is set to after installation. We had a tech guy from our local printer chage the values and now we only have problems
View 5 RepliesSomething has changed dramatically between X4 & X6 when printing color.
Using X4 right out of the box with no "tweaking" all pantone colors print perfect on Xerox 700 Digital Color Press.
Trying to print same pantone colors in X6 with no "tweaking" on Xerox 700 Digital Color Press, color is not even close.
Is there a way to setup X6 to replicate color management of X4.
how can I set the "color management" to the printer to print exactly colors as on the monitor?
View 4 Replies View Relatedbug-2.jpg
See the red marked area, where it is not accepting to select the rgb or cmyk. Only accepts the Lab only. It is changing the X5 but not in the X6.
For some reason I cannot get the color management screen to open where you see the printer, monitor, and other things that are located there.
I tried clicked on tools -color management but it opens document setting and that's it.
I am using X-15 and just not sure what I am doing wrong.
I always use CMYK in my designs and the Pantone color codes for their logo design. I have never had to convert them before and have searched forums and boards with no luck in finding an easy way to do this.
View 4 Replies View RelatedThis discussion is on using RGB file creation techniques to output to ink jet devices. I posted the comments below the link because color management off always pops up in the conversation as it turns to non-postscript devices so I wanted to circumvent the side bar conversation.
[URL]....
First let's get this straight, I've written it and said it about a thousand times, you cannot turn off color management.
When you select simulate color management off in the default application color management dialog, CorelDRAW simply utilizes a different set of color management settings. The rules of color management never change! The application requires guidelines on color and still must have rules that govern conversions, PERIOD.
These rules are not different, only the engines, rendering intents and profiles change. These setting in X5 and X6 can be, in some cases adjusted to simulate previous setting in versions prior to X5 that were labeled color management off, but this label in older versions (X4 and older) were deceptive in their nature, color management was never turned off, just set to a specific configuration.
Simulate color management off (in X5/X6) uses wide gamut cmyk simulation as the CMYK profile, it disengages the color engines (setting CorelDRAW to another internally controlled process) and sets the interface to RGB. It does not turn color management off.
These settings have many uses for industries such as laser engraving and screen printing separations and I support their continued use. Do not confuse this and use these settings for professional output using press work, ink jets or digital printers.
Document colors in Corel Draw X3 have changed. Example: dark green is now black on my designed object; Teal is now light green.
I thought it might be color management had switched somehow but all management settings do not make a change as they did before or at all. Basically I think the problem lies in the color management. I re-installed the program but the problem remains. Color management does not affect color appearances as they used too before.I run windows 7 and have had it for a couple of years with no problems.
I have a problem with CorelDraw X6.
When printing 100% black on laser printer the Black is all in raster. Very strange because the same file printed from X4 /same PC and same printer/ is OK and is not in raster.
Probably the problem is somewere in X6.
I don't belive that the problem is in the color management because it's the same as my X5 and there all is OK too.
I have more than 1000 installed on an xp system. I know I don't need this many. I'm sure I could get by with 400 or less. How do you thin down your fonts? How many do you try to keep on your system?
What are you using for font management? Bit stream? Something else?
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
We are just in the process of setting up Corel X6 for deployment in our office and we are trying to get a handle on the colour settings. We have upgraded from CD11 which had very little in the way of colour management and so we are somewhat inexperienced in how to set up.
We have two production printers an OKI 821 and a Ricoh C820DN which we print to using PCL drivers. We believe that we therefore need to use RGB as our colour mode and use an ICC profile for each printer for colour correction with colour management switched off on the driver. Is this correct? We've had a try this afternoon and the colours on the prints differ greatly from the display (which has been profiled using an xrite i1pro calibrator). They also differ from each other.
The monitor profile is set as the device profile in the windows colour system, and we are using that as our engine in corel.
I recently purchased an Epson R3000 and am having terrible trouble with the colour management from Corel. Everything I output has a very yellowy/browny caste over it when compared to my screen (for example a slightly warm grey comes out brown-grey and light blues come out very murky in colour tone). I have applied Adobe RGB (1998) to the document, opted for Corel to manage colours and turned off colour management in my printer. I am also using IC profiles specific to my papers. My monitor is self-calibrated but up until now the colour difference between screen and output device has never been a problem.
View 10 Replies View RelatedI have just purchased Corel draw x5 and need to change the colour management default settings but when i go to tools, colour management, i only have document settings! I have done this with new pages, old pages, images on pages etc and no luck.
View 6 Replies View RelatedI run a little print shop as part of our Charity and we produce T-shirts, sublimation mugs and coasters as well as some paper based goods.
I've read a lot about color management but what is the best way to to set up to print to our postscript printers (one OKI 821 & a Ricoh 820DN)
Currently I have the default workspace set to CMYK, sRGB & coated Fogra39 profiles, color engine as WCS, preserve black off and the rest as defaults.
My question is how to set up for printing to postscript? I've read that this is best for color accuracy and allows for different colour spaces with in the same document. We print a lot of cards for local artists whose images are edited in Photoshop and output as srgb jpegs. We then import these into corel and add writing using the standard CMYK palette.
At the moment when we print we have corel set to manage colours, output colours as native as there is a combination of of RGB & CMYK elements. Within the printer driver we set either CM off or ICM managed by host, depending on the driver.
Is this correct? I did have a thought that this combination may mean that effectively there is no color management happening at all!?! It is useful for us to keep the jpegs as RGB because some customers will require their artwork on sublimation items as well which require transfers being produced on a non-postscript device. For these we use a sublimation ICC profile and a PCL driver and it works well.
With postscript I have found that outputting the file as cmyk rather than native dulls the image considerably. However, using native output gives different results from both of our printers.
I recently started working on coreldraw x5, but i am having trouble saving a print style and getting the default colour management settings, i dont know if i missed something or did something wrong, but i dont even have those options on my program
View 1 Replies View Relatedread that color management pdf by gennady petrov and tried a few things he wrote. I turned off color management in the printer driver, chose corel to manage color, and the image default profile sRGBxxxxx. picture was way dark and ugly. tried several other profiles and same dark picture. hmm that did not work so well.
went back to the printer driver and disabled no color management, and chose the profile Adobe RGB. still kept corel as manager and chose A RGB as the profile and the print looked spot on. Have not had problems printing from corel because I have come up with my own system, but was quite surprised at the result from turning off color management in the printer driver.
Is there a way to apply a color to selected objects without having to search for the color in the color palette. So say if I am working with an image that has multiple colors but want to use only one of the colors in that image, is there a way to apply it without having to create or add it to the palette.
View 3 Replies View RelatedI still use Corel Draw 12 and my question is is there an easy or automatic way to make the outline color of an object the same color as the fill color? I do it the hard way of trial and error until I get the right outline color from the color dock/pallette.
View 10 Replies View RelatedI'm having a major issue here, I use custom colors (created in my custom palette), X^ used to hold it very nicely, even in PDF exports etc.
Now - with the latest update, X6 "forgets" the custom colors, it resets it to default color, I have to manually set every object to the custom color all over again.
Is there anyway to transform a 4-color CorelDraw picture into a 2-color one at reasonably good quality?
The problem I met is at the galley.
I could, or might, only be able to get a 2-color printer at reasonably good price.
The original design is 4-color. But the actual detail is not very important.
They are book covers, which only need to protect the book.
The exported picture is shown below:
To create 2-color artwork from any colored vector clipart I used to be able to:
import colored clipart convert to CMYK if needed select entire graphic and create new styles with 2 parents change (edit) the colored parent to a named Pantone spot color (the child colors automatically become percentages of the Pantone spot color) "find and change" the remaining CMYK to Grayscale, and then back to CMYK (this ignors the spot color and converts the annoying rich blacks to percentages of K) export to a PDF file--which when imported into, say, InDesign, will separate on the K and Spot Color Plates only, in all its glorious shades of gray and tints of Pantone spot color.
I'm completely at a loss on how to do this in X6, and I'm on a short deadline.
What does the CV mean at the end of a PMS color and what is the difference between C and CV? I know it's a coated color.
View 2 Replies View RelatedWhen I print the same file out of X6 & X4 the color is much different. I know this has to do with color management but now sure how to correct. The color coming from X4 is much better.
View 2 Replies View RelatedYesterday CD upgraded itself as I turned it of to go home from work, when starting it the day after all seemed to be as it was util I should print out a color separation. Suddenly I now have to check every color that I want to print out, the only color that doesn't need to be checked is black(cmyk black) all pantoen colors have to be checked.
Why is this changed?
Can I set it up so all colors is to be printed as default?
Also having some trouble in exporting to EPS, when exporting all seems fine, but the file appears to be empty, the next exported files seems to be fine thou. First export is always empty.
For our sublimation printing, we use Corel X3,
For some time we have problems with the colors.
As standard pallette we use Pantone Coated, but after I export a .cdr to .eps some colors are replaced with a new color with the same name, when I open it in Coreldraw again afterwards. The colors are placed in a new user pallette and have different CMYK values.
How knows how to keep my PMS coated pallete?
Color nodes are blue by defaut. When I draw something with blue, I would like having red nodes, or another color. I guess there is a set-up for that, but I realy don't find it.
How do we change nodes color ?
On the bottom page the outline box has a white vertical square/line on the right of it. Since this happened my outlines are transparent when place on top of other objects. How can I fix this to get it back to soid colored lines.
View 14 Replies View RelatedI have a vector graphic with two colors and zillions of pieces. I am trying to group by color and can not figure out how to do it.
View 3 Replies View RelatedI must have clicked on something that has caused there to be no color in a design or text. It looks transparent. In the lower right corner it shows to be the correct color and outline but it does not show up on my screen.
View 3 Replies View RelatedI have corel on 2 different computers and all settings the same however the colors still come out different on screen and when i JPEG..
CURRENT COLOURS PReferred colours
Where can I find RAL Color palette (.cpl) for CorelDRAW?
View 10 Replies View Related