CorelDRAW Graphics Suite X6 :: Colour Management In PCL Printing?
Oct 3, 2013
We are just in the process of setting up Corel X6 for deployment in our office and we are trying to get a handle on the colour settings. We have upgraded from CD11 which had very little in the way of colour management and so we are somewhat inexperienced in how to set up.
We have two production printers an OKI 821 and a Ricoh C820DN which we print to using PCL drivers. We believe that we therefore need to use RGB as our colour mode and use an ICC profile for each printer for colour correction with colour management switched off on the driver. Is this correct? We've had a try this afternoon and the colours on the prints differ greatly from the display (which has been profiled using an xrite i1pro calibrator). They also differ from each other.
The monitor profile is set as the device profile in the windows colour system, and we are using that as our engine in corel.
I run a little print shop as part of our Charity and we produce T-shirts, sublimation mugs and coasters as well as some paper based goods.
I've read a lot about color management but what is the best way to to set up to print to our postscript printers (one OKI 821 & a Ricoh 820DN)
Currently I have the default workspace set to CMYK, sRGB & coated Fogra39 profiles, color engine as WCS, preserve black off and the rest as defaults.
My question is how to set up for printing to postscript? I've read that this is best for color accuracy and allows for different colour spaces with in the same document. We print a lot of cards for local artists whose images are edited in Photoshop and output as srgb jpegs. We then import these into corel and add writing using the standard CMYK palette.
At the moment when we print we have corel set to manage colours, output colours as native as there is a combination of of RGB & CMYK elements. Within the printer driver we set either CM off or ICM managed by host, depending on the driver.
Is this correct? I did have a thought that this combination may mean that effectively there is no color management happening at all!?! It is useful for us to keep the jpegs as RGB because some customers will require their artwork on sublimation items as well which require transfers being produced on a non-postscript device. For these we use a sublimation ICC profile and a PCL driver and it works well.
With postscript I have found that outputting the file as cmyk rather than native dulls the image considerably. However, using native output gives different results from both of our printers.
I recently purchased an Epson R3000 and am having terrible trouble with the colour management from Corel. Everything I output has a very yellowy/browny caste over it when compared to my screen (for example a slightly warm grey comes out brown-grey and light blues come out very murky in colour tone). I have applied Adobe RGB (1998) to the document, opted for Corel to manage colours and turned off colour management in my printer. I am also using IC profiles specific to my papers. My monitor is self-calibrated but up until now the colour difference between screen and output device has never been a problem.
I have just purchased Corel draw x5 and need to change the colour management default settings but when i go to tools, colour management, i only have document settings! I have done this with new pages, old pages, images on pages etc and no luck.
I recently started working on coreldraw x5, but i am having trouble saving a print style and getting the default colour management settings, i dont know if i missed something or did something wrong, but i dont even have those options on my program
This discussion is on using RGB file creation techniques to output to ink jet devices. I posted the comments below the link because color management off always pops up in the conversation as it turns to non-postscript devices so I wanted to circumvent the side bar conversation.
[URL]....
First let's get this straight, I've written it and said it about a thousand times, you cannot turn off color management.
When you select simulate color management off in the default application color management dialog, CorelDRAW simply utilizes a different set of color management settings. The rules of color management never change! The application requires guidelines on color and still must have rules that govern conversions, PERIOD.
These rules are not different, only the engines, rendering intents and profiles change. These setting in X5 and X6 can be, in some cases adjusted to simulate previous setting in versions prior to X5 that were labeled color management off, but this label in older versions (X4 and older) were deceptive in their nature, color management was never turned off, just set to a specific configuration.
Simulate color management off (in X5/X6) uses wide gamut cmyk simulation as the CMYK profile, it disengages the color engines (setting CorelDRAW to another internally controlled process) and sets the interface to RGB. It does not turn color management off.
These settings have many uses for industries such as laser engraving and screen printing separations and I support their continued use. Do not confuse this and use these settings for professional output using press work, ink jets or digital printers.
When printing 100% black on laser printer the Black is all in raster. Very strange because the same file printed from X4 /same PC and same printer/ is OK and is not in raster.
Probably the problem is somewere in X6.
I don't belive that the problem is in the color management because it's the same as my X5 and there all is OK too.
What is the default color management setting (all the setting) that Coreldraw X5 is set to after installation. We had a tech guy from our local printer chage the values and now we only have problems
I have more than 1000 installed on an xp system. I know I don't need this many. I'm sure I could get by with 400 or less. How do you thin down your fonts? How many do you try to keep on your system?
What are you using for font management? Bit stream? Something else?
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
I always use CMYK in my designs and the Pantone color codes for their logo design. I have never had to convert them before and have searched forums and boards with no luck in finding an easy way to do this.
Document colors in Corel Draw X3 have changed. Example: dark green is now black on my designed object; Teal is now light green.
I thought it might be color management had switched somehow but all management settings do not make a change as they did before or at all. Basically I think the problem lies in the color management. I re-installed the program but the problem remains. Color management does not affect color appearances as they used too before.I run windows 7 and have had it for a couple of years with no problems.
A lot of the time I like bullets to be a different colour to their following text. In past versions you could highlight the bullet and pick a colour from the palette. You had to do it with each individual bullet which was a pain, but it could be done. Now if you highlight a bullet and then click a colour, nothing happens. I was hoping that this might be because they'd added a function to choose bullet colour elsewhere (such as in the Bullets window), but apparently not.
X5 Recently have begun missing parts of print out. Tried to duplicate but appears completely random.
Output to both Full colour laser and Wide Format printers will miss either text or part of objects. Today printed the text but not the text effects. Initially closed and reopened, rebooted, However this has become a now daily feature so regardless tried reprint from the same screen so next print has everything included.
Very costly and time consuming - print preview shows all correct but output is not the same.
Problem: I've upgraded from Corel x3 to Corel x5 and when I am exporting .eps files in x5 I am getting different colors to that in x3, I have changed my color management, changed the levels of export yet I cannot get the colors right.
I have just discovered the proof on /off switch in the bottom right hand corner in Draw. What is this for? I notice the colurs change when I switch it on or off. I work with RGB and produce digital images for people to print out on their home printers to use in paper crafting. Should I have this switched on or off? I notice colours are slightly different when I print my designs off myself to what they are on screen. Is this an important feature or not. I only have a liminted basic understanding of the software and have only recently began colouring my images so don't know much about 'Colour' at all.
I have created a curved line across my page using the Bezier tool. I need to fill the page below my curve to make it blue (and above the curve to stay white).
The problem that has been with me for years is how to print a booklet as a single print job onto a digital printer that has say a colour spread on cover and centre pages... Coreldraw X5
Scenario: A3 12pp bookletI might receive a file in publisher or whatever but colour is generally on most/all pages but the client only wants colour on say cover spread and centre spread pages. I convert this file to a PDF using distiller, then save it as an EPS file to import into Coreldraw. (The step to convert to eps seems very important as I have encountered font and spacing issues when importing PDF into Coreldraw - eps seems to over come this problem)Even saving the PDF in distiller as a Black only file, am still getting the colour click on the printer...
is there any way to isolate say the cover pages and print as colour with other pages as black only I have tried saving eps files as black only but they still register as a colour print on the XeroxWould love to see an option to set properties of individual pages to colour or mono (does it exist?) At present, I have to print all the colour spreads and the black spreads and hand collate together! time comsuming to say the least!
surely there must be others out there with a similar problem? how do you overcome it?If I am designing I can easily ensure pages are black only but not when the arttwork is coming from so many different sources.
My background in Corel 5 is no longer white. It is a light yellow or cream & is very hard on my eyes Windows update downloaded an update for my monitor (Samsung SyncMaster 2233) & printer. When I opened Corel 5, I was asked what colour management I wanted, I did not know. I believe I selected "monitor based" or something like that, the way the question was, made me believe I was choosing the same setting as before. Obiviously wrong. Using Corel draw 5 help I selected "page background" picked solid: choose white but did not change. I then choose "no background" but did not change.
My corel x5 opens with object properties are set with x no fill and on opening a new document and creating a shape, it has no fill.
My boss opens corel x5 and his object properties are set with x no fill but on opening a new document his properties change and a blue color shows in his fill, and of course when he creates a shape it is filled with this blue color.
Yes, he can just change the properties to x no fill each time he opens a new document but i wondered if we can change it and have it set at x no fill as the default ? I have tried everything I can think of but it seems to want to keep this blue color as the default.
When I am in Enhanced view mode Coreldraw turns all whites into a pale yellow color. I can not figure out how to reset it to pure white. It's double strange that it I zoom in quite close to an object it reverts back to white until I zoom out again! It only occurs in enhanced view not the other modes.
I'm producing a limited 8-colour palette mosaic for a restaurant wall using 1734 tiles represented as tessellated objects superimposed on a colour-reduced photo. Each tile will be one of 8 colours.
My question: how do I calculate the number of tiles per colour? I already have produced the tiles with their respective colour.
there is the scripting language - which is likely my only option - but as I'm new to the game:-
1. Is there an inbuilt Draw function to identify and count the number of objects with a specific colour, or
2. How can illustrate some Corel Script I can get started with to achieve this?
Long of the short of it is, when I export a vector graphic as eps format it is changing my pantone colors to black. Not just 100% black but like 2% Magenta, 4% Yellow, 95% black. When I export rgb or cmyk objects, not a problem. It only has issues when it involves a pantone colour.
I have never had issues with this from the past 8 years I have worked with CorelDRAW. This was also something that just randomly happened, no computer upgrade, no major software changes, nothing.
I am currently running Windows 7 64bit with CorelDRAW Graphics Suite X5.
I need to import an pdf file which contains text in black colour in corel draw X5. By default it import the file in RGB colour model but I want the same in cmyk colour model.
I have printed off the colour swatch within Versaworks, but when I use the colours (which have been imported from versaworks) in corel they do not print out the same colour. The media is the same. I have tried deleting the colours and readding them in but this does not seem to make any difference.
