I have a file set up that has a white box with a 65% transparency lens. When I go to print, the white box and what's under it disappear and do not print. If I close the document and reopen it, the transparent box and what under it are back.
What do I need to do so this doesn't happen?
i have that issue i made one flyer w X4 where exist a bitmap that must be to the edge of cutted paper , so i made it bigger out of page, i close it to PDF for my printer adding a bleed limit, everything else out of page (inside the bleed ofc) appear BUT the bitmap (lens) stop to the edge of page.
View 12 Replies View RelatedI have been getting an immense number to images lately that have that wonderful white background.
I simply use the masking tools and cut/paste back into Draw to get a transparent background, but it is time consuming.
Any way to do this with Replace Colors?
In X5 is there a way to change the size of the centre 'white' spot when using transparency or is it always proportional to the object size?
View 3 Replies View Relatedtransparency bug.jpg.....transparency is not applying properly for the inverse white to black gradient, check the attachment.
View 12 Replies View RelatedAfter successfully using Corel Draw for some years, I am suddenly unable to print files. Instead of the file, my printers just print a black page. I have tried re-installing but it has not worked.
View 1 Replies View RelatedWhen I am printing my design, the black is not printing. Have tried on two printers, neither are faulty. Wondered if I accidentally have it on a setting that doesn't allow it to print black.
View 3 Replies View RelatedI have a problem with printing in X5. All the documents I've worked in X4when I print the X5 have a problem with the colors, they are not the same with X4.
Printing with: HP inkjet 110 A0Riso RZ370, RZ590 A3Epson inkjet 1400 A3Canon laser LBP5200 A4HP laser 1010 A4
I got a new corel draw x6. When I print the file at color printer with some white color inside the file. The white color will print on the paper like light yellow color but what I suppose the white color should not appear on the paper.
View 14 Replies View RelatedWhile using print merge option Corel Draw X5 give me an error when I try to import an existing csv or txt file on the print merge dialog box. It says "Impossible to open the file or not correct file format". The files are made with open office or microsoft works, and in the past I've already used and worked good. Now I find this error...
View 4 Replies View RelatedWhy, if a file is 11MB, would the print file be 90MB?
View 10 Replies View RelatedI have one logo designed in Corel draw X5 and sent the file to the printer company ,they have corel draw12 on their PC and they are not able to open the design as it come as a blank page in corel draw12 .. how to open the same in corel draw 12..
View 3 Replies View RelatedWhenever i save a file, and then try to open it later on, it wont open. Nothing happens (just like I haven't clicked anything). It does this is I double click the file or I do File >Open. However if i save the file as 'Version 13' it opens fine. I decided to re-install Corel Draw (a number of times), but the problem is still there!
View 15 Replies View RelatedCorelDraw X5 (German Version 15.0.2.0695):I've installed Corel X5 under Windows 7 Ultimate 64 Bit.
When I try to set up my ppd-file in the printer dialog window, I can chose the ppd-file but the OK-button (öffnen) doesn't work. Clicking by mouse or by Enter button at the keyboard: nothing happens, the ppd-file won't be accepted. It seams the OK-button is out of any function in this window.
we have a problem with the file dialogs in Corel X5.When we open the dialogs, we can see the dialogs like on the screenshot.
After this CorelDRAW X5 hangs and must shutdown with the task manager.
This behavior is on all file dialogs (Save, export, import, export)
System:
- Windows Vista 32Bit (German) - Classic Design
- CorelDRAW X5 (15.2.0.686)
Any project I save cannot be opened later. When I try to open .cdr or template file I get the message ''CorelDRAW X6 (64-Bit) has stopped working. A problem...etc...please close the program''
I noticed that this first happened in projects that had text on them but now I can't open any .cdr file.
My system specs:
Intel Core i7 2600 3,40 GHz
RAM 16GB DD3
ATI Sapphire 6870 1G VRAM
SSD OCZ 120GB Sata III
Windows 7 Ultimate 64 bit.
Corel draw X5 and X6 is not able to show me the preview of PSD file format.
View 9 Replies View RelatedUsing X5 suite. Just installed Windows 7 on my stand alone system. Now when I make a change to a file and attempt to resave (Save) it, the message box says the file is "Read Only" and asks me to save under another name.
View 5 Replies View RelatedI have recently upgraded to X6 from X3. After design work I would export the file to jpeg for client approval. I used Apple Mail 5.2 to attach the jpeg file but my problem is the client cannot open the file. It just turns out blank with a little cross. I cannot figure out what is the problem during the export process. I have no problem at all with X3.
View 9 Replies View RelatedI am having an issue with X6's print merge not recognizing a properly formatted numeric filed from my Excel spreadsheet. My first issue was that Corel was adding a decimal point after my numbers. This was when they were still formatted as text fields. (which i still don't understand why, since they were just TEXT fileds)
I know that the fields need to be "numeric" fields.
FYI i have ALREADY COMPLETED MY TASK by using an "added" numeric filed that i added IN CorelDraw and then used the "Numeric Field Options" at the bottom of the page to get my number sequence.
However, that is not my question.... my question is: How do i get corel to RECOGNIZE a numeric field AS a numeric field in the first place.
How to use Lens Dockers in CDR X5.
View 4 Replies View RelatedHow do you get rid of a lens effect? I've looked throughout the program and cannot find how to get rid of the stupid lens. I want the object to be solid.
View 7 Replies View RelatedI have an existing X6 document which has a rectangle object with a Lens attached.
I did not create the document, so what sort of lens it is and what settings the lens has. I suspect it is a transparency lens.
I cannot find any way to locate the settings for this lens - so that I can reproduce and modify the lens settings. Where i can find the settings for the lens?
I am trying to export my Corel Draw project to a PDF. Everything works as expected except all Curves with lens are not showing up at all in the exported PDF.
I have tried opening the PDF with several different programs with the same result. I have also tried changing the PDF export settings but haven't had any luck.
I was doing some "sphere-ology" and wanted to overlay a bitmap pattern. I tried to use a Fish Eye lens on a bitmap to give it some shape before applying it, but it does not seem to work. It will cut out the shape, but no distortion is applied.
I found this thread from a couple of years back on X5. There was no resolution.
Should this work on a bitmap?
I'm running X6, 64-bit on Win-7.
A graphic exported in Draw & PP in X4 as a .png works fine.
The same graphic copied & pasted into Draw or PP in X6 does not.Repeatable 100%...The eyedriopper selection of the transp[arent color seems to pick up the right color, but the output presents like a .jpg. Viewed in IE9, Firefox & Chrome with same results.
I work in pre-press for a Label Printing company and we do Flexo and Screen printing. I get files from designers, most files have been created in Illustrator.
I use Corel Draw X5 to do my pre-press work and some of the files I get have Lens effect objects. When I apply the "No Lens Effect" the object changes to a Symbol and it has no fill and no outline, how do I convert the Symbol object to a "regular" object?
I want to know the best way to convert these Lens and Symbol objects to regular objects that are "flattened" or do not have transparency. I need to be able to work with these objects like they are a regular vector object that can be edited for pre-press to make files to send to have films output.
OR, will an object that has a Lens effect output normally if I make a Postscript file fro the Lens effect object? Do I even need to convert the Lens effect in order to get the image to output correctly?
I made a menu card cover using lens effect...but converting this design to CMYK/ RGB Bitmap show varied color?
View 1 Replies View RelatedI have a background image with Linear transparency applied on the top of my image. I would like to replicate the same transparency on the bottom of the image. How can I do this?
View 4 Replies View RelatedIs it possible to do transparency all around the edge of an object. say you had drawn a circle can you make the edge all around transparent or say make just the middle transparent?
I often find that I would love to fade out in more than one direction.
[URL]......
Is there a way to control the layer transparency in CorelDraw 5? We often have control objects we need to superimpose over the actual drawing object, but want to see through the control object (on a higher layer) so we can align the actual drawing beneath the control layer.
View 14 Replies View Related