I got a new corel draw x6. When I print the file at color printer with some white color inside the file. The white color will print on the paper like light yellow color but what I suppose the white color should not appear on the paper.
View 14 RepliesSsince my last update in X6 all my whites are exporting as yellow and appear yellow in the thumbnails!
I can't even roll back to X3 as that has stopped giving me export options in the pop up dialog box!!!
When I print something with white in CMYK, the printer comes in beige / yellow?
View 2 Replies View RelatedI have a file set up that has a white box with a 65% transparency lens. When I go to print, the white box and what's under it disappear and do not print. If I close the document and reopen it, the transparent box and what under it are back.
What do I need to do so this doesn't happen?
coreldraw graphics suite X5 just installed on Windows 7 background and page are yellow how can i remove this?
View 3 Replies View RelatedI opened up Adobe Photoshop, the usual white color was a light yellow. The RBG color values were right for white but White just wouldn't show. White shows in every other program I have used, word, mozilla, excel, etc. I just recently got a new samsung monitor and I wonder if it might be a display problem. My old CRT monitor didn't have this problem. I tried playing around with the color settings but it did nothing. No matter what I do, all the white because a light yellow on adobe photoshop.
View 17 Replies View Relatedwhy the dimension tool now appears in blue? how to change it back in black?
View 8 Replies View RelatedI have tried to install Corel 12 to Windows 7 (x64). Corel 12 refuses to install himself reporting "Internal Error 2738". I tried to solve this problem by re-registering vbscript (recommended for Windows Vista), but with no effect.
View 8 Replies View RelatedI have been trying to learn the chiseled effect on Discovery Center the video tutorial the girl voice came so distorted that I decided to look up the written version .In the step 3 they ask to Arrange Combine but Combine does not light up
View 6 Replies View RelatedNew to CDR X6 just having upgraded from CDR 8.
Printing a black and white layout to my HP LaserJet 4000 produces an image that appears to be grayscale instead of solid black. In other words, my text, line border I've put around the layout and graphics (for the most part), all appear about 70-80% black instead of SOLID black. Small text doesn't appear to be nearly as sharp because it looks like a halftone instead solid black. On one layout I just printed, the entire thing appears halftoned except for one vector graphic that did print in solid black. Strange. I figured I have something set incorrectly in the software or printer. Has to be the CDR X6 software though because all other programs output just fine.
When I try to delete a power clip effect the delete powerclip doesn't light up and I am not able to delete the power clip.
View 11 Replies View RelatedHow do I get it to get bigger as it goes outward? I see up top where it says "spiral expansion factor" but it is light gray so I can't use it.
View 14 Replies View Relatedhow do I Change the light blue color of text selection in corel x6
View 11 Replies View RelatedIn coreldraw x6 selecting text for editing show light blue background. How can I change it to gray as it is in coreldraw x5.
View 7 Replies View RelatedI have a client that I laser engrave parts with a variety of graphics, about 35 different designs that fit on 10 different parts and all the designs are different sizes on the parts. I use a fixture that holds 40 parts, two rows of 20, for each type of part. I have a master file for each part that contains a page with each graphic laid out as in the fixture so that I can simply go to the page and select the graphic in the right position for the fixture and paste it into a "lasering" file. The lasering file is just as many pages as I need to run the order and is much smaller than the master file.
That works fine now and is actually pretty quick and easy to setup, but I just found out that they will be adding about 35-40 designs a month. That will make the master file huge and very cumbersome to manage, not to mention the order sheet (spreadsheet) will get huge in no time at all. I can envision it becoming a nightmare to manage and mistakes will be frequent due to the sheer size of the files.
What I would like to do is have a spreadsheet with the graphic and a quantity and merge that into the lasering file instead of doing it manually. I am very familiar with merging data but I don't know if it's possible to merge a graphic from a database or somehow import the graphic into corel.
I have a logo I am working on and it has too much white in the logo. get rid of all the extra white in the logo.
View 1 Replies View RelatedI use to use Coreldraw X3 when I open the files in X5 the colors have turned to green(on vista) just got Windows 7 (64-bit)and when I open files from X3 and X5 the colors have all turned to white now.
View 3 Replies View RelatedWhen I'm gonna write my program stops and appears a box that says Run time error and close my program. What is that, what I coul do?
View 1 Replies View RelatedWhy am I having trouble printing out an 8.5 X 11 full coverage page when my setting says there are no issues?
Also, why does it want to print inside the dotted border if I have it set to print full page?
I am unable to print over 6' in length even if the file size is small. I am using a Roland SP-300.
View 5 Replies View RelatedI'm trying to print a flier on A6 paper on an HP CP1515n. I set the paper size in Corel 12 to A6, then set the paper size on the printer to A6. The paper feeds through very nicely - with nothing on it.
It works fine printing from MS Word so I am placing the paper correctly.
Using XP Home Edition SP 3.
I am currently printing on A4, then cutting into 4. I have found a cheap source of A6 paper but can't get my fliers to print.
I want to start a project on Corel which will be initially printed. So I will start with the basic Cmyk template given from the window that pops up and make sure that the Color Managements is set correctly for printing settings.
My question now lies: What should I do if the same project has to be uploaded on the web too? What I would do is:
1. Create a new project selecting the RBG template given from the window that pops up.
2. Paste the project
3. Convert the colors to RGB
4. Set the Color management to RGB settings.
5. Export.
I have to make print merge firelds in CDX6.
The problem is that I have not Excel on my PC. Only Open office. I create a csv file but Open Office asks me every time what the Field and Text delimiter have to be - for the Field "," ";" ":" "tab" or "space" and for the Text " or '. After that it asks me to check or not few check boxes. See the picture below.
I tryed few combinations but the same result - Failed to save print merge data!
I dont know what to chek but the biggest problem is that I tryed to save a txt tab delimited on other computer with excel and when I try to print merge after loading the txt file Corel says Failed to save print merge data.
I saw that we can Print merge directly from xls files but I cant find that option in ODCB Data Source. Weird! because I have to do 1100 badjes with different merge fields like country, name, code etc... and if I start to make them by hand it will be forever!
I'm using corel draw x5 and my monitor shows white as very light yellow, the only way to stop this is to change the color conversion settings to none which then turns all the colours to RGB which don't relflect the colour that would be printed.
My monitor is a Dell U2410.
I would like to scan some original pen and ink drawings I do and I'd like to remove the background once they are on the page so I can manipulate the art. I work in Corelx4. Will this same technique work with book pages scanned in?
View 1 Replies View RelatedIn my Pantone Coated has no WHITE in it or do any of the other pantone groups. RGB and others do. Is there a way to get white on there.
View 2 Replies View RelatedI need to screenprint a portrait/photograph in white onto a black t-shirt & am wondering the best way to do this.
View 4 Replies View Relatedhow to work cereldraw x3 i was going fine with all my work then it just went white when i tried to do something not sure what and now i dont know how to get it back to normal i cans elect my work but cant see any of it
View 2 Replies View RelatedI'm creating two websites for two different clients, and both gave me scanned copies of their logos. I converted them to GIF, JPG, BMP and PNG (from MS paint program), followed all the directions found online in various combinations to remove the white background from these logos. Here's a sample of what I did:
import logo; edit bitmap; change background; used magic wand on white areas; close paint & export doc. I've tried various combinations of clicking on options like transparency, masking, changing the tolerance and nothing works.
On one the white background simply won't go away after saving to my desktop, and on the other there is a grey/white checkerboard pattern on the background.
When it's all said & done, I need to upload these to Wix.com as a PNG.
I'm at my wits end been trying to do this for two days after work, wondering if Corel is even capable of doing this, or if my clients' logos are just unusable or if I'm just losing it.
The upper lip is a vector shape with a fill no outline. The skin is a mesh fill. Why is there a white line around the upper lip shading?
View 2 Replies View RelatedI have been getting an immense number to images lately that have that wonderful white background.
I simply use the masking tools and cut/paste back into Draw to get a transparent background, but it is time consuming.
Any way to do this with Replace Colors?