How can I apply edited paragraph style to all at once.
I mean I have created new paragraph style with 10 pt Arial font and applied to different paragraph. And now I have edited the same paragraph style with 16 pt. Arial font, now how it will applied at once to all old style that I have used.
I have a document of 300 pages or so of flowing text which I wish to edit into chapters.
Ideally I would like to select the start of a line of text and place it at the top of a page where it will then stay without breaking the paragraph links, as in Word (this also maintains the word count across the whole document).
Alternatively, could I simply break the paragraph links? When I attempt this now with Arrange/Break Paragraph Text, all that happens is
that a new page with an unlinked text frame appears, but the 'before' and 'after' pages are still linked, which defeats the objective.
The only way I've found to divide the document up is to copy it whole and then delete pages before and after the required chapter breaks and then reassemble them into one document, which is pretty laborious.
I'm sure I'm missing something really basic here.
I am doing a job with columns of donor names (originating from a Word file). Most of the lines space just fine but occasionally there is a 'phantom line' for want of a better term, sort of like I've gone from single spacing to 1.5 or so.
The thing is my paragraph text stats don't change... I highlight good lines - they show as 100%, I highlight the troublesome section, it shows as 100% and there is nothing in the Word file to show that this originated there.
As the job needs to get out the door, I'll just cut out the offending bits, make them artistic text and drop them back in to fit properly. WIth more than a thousand names this is getting pretty old pretty quick.
why the bounding box is so wrong when exporting paragraph text as EPS and placing it in InDesign or opening in Photoshop? See screenshots below. Text is being convert to curves in the EPS export dialog box.
At one point today, I was exporting an entire 8.5x11 page with a small block of paragraph text in the middle and it came into InDesign at 10x11".
Draw 16.3.0.1114, Ghostscript GPL 8.64
My boss has produced a layout that has images, artistic text and paragraph text and wants the whole thing half the size. Obviously the paragraph text doesn't just scale down when everything is grouped, do I just select the paragraph text and convert it to artistic text ?
View 13 Replies View RelatedI used to click on the A in the toolbox and look up on the menu to change between paragraph text and artistic text but I can't find that icon or any icons to choose paragraph text. It eludes in customizing the tookbox too?
How do I get that paragraph text tool to show up in menus, bars and the toolbox?
I have some 20 pages file and used 2 font in it. Now when I look in Text - Text Statistics it is showing 6 different fonts other then I have used. I try to look in object manager it is showing paragraph text with only one font. How to find out the fonts that is not used by me.
View 1 Replies View RelatedHow do I remove the "paragraph" symbol or turn it off??????
It wasnt on when i first installed it last week and i must have turned it on by accident...and there is not a button that i can see to turn it off like in ms word.
Words in a paragraph are splitting into different lines when it gets to the end of a line. How do I stop words from splitting into different lines in a paragraph.
View 4 Replies View RelatedI have set Ariel as my default font for paragraph & artist text with 12 pt.. On making some change of text with font say to New Times Roman 18 pt. then the new artist text or paragraph text is 18 pt. as default font.
View 2 Replies View RelatedI can't see the text in several paragraph text boxes but they print fine. The outline is red on-screen but the contents aren't visable unless I print it.
Can I do something to the file, clean it, save as, reindex it, re-build it ?
I need to hide the dotted boxes that are now showing in X3 around all paragraph text on maybe 1000 business slides I created 5 to 10 years ago and now want to update.
Changing to artistic text does make the dotted boxes go away but is there a master setting that would make them go away in paragraph text?
Five to ten years ago I created maybe 1000 busness slides in CorelDraw and then moved their images to Powerpoint. Versions used were 11 and X3.
Now when I want to dust them all off and freshen them I find dotted boxes around .
With a number of of paragraph text objects selected, the interactive rotate becomes increasingly sluggish in keeping up with my mouse position when dragging round. I've got a calendar artwork with 12 paragraph objects, and after I've let go of the mouse button, the screen will continue trying to update for anything up to 10 seconds afterwards, during which time I can't do anything.
View 6 Replies View RelatedThis is a problem that comes from previous versions. When applying a figure using Wrap resource to a Paragraph Text in columns: most of times the basis of the text is not aligned correctly.
View 2 Replies View RelatedIn my one file I am unable to do copy and past command in paragraph text mode in one particular paragraph text handle. Can't find the reason. But in same file with new artistic or paragraph text handle I can do copy and past.
View 3 Replies View RelatedI was doing some "sphere-ology" and wanted to overlay a bitmap pattern. I tried to use a Fish Eye lens on a bitmap to give it some shape before applying it, but it does not seem to work. It will cut out the shape, but no distortion is applied.
I found this thread from a couple of years back on X5. There was no resolution.
Should this work on a bitmap?
I'm running X6, 64-bit on Win-7.
In coreldraw 12 there used to be a drop down menu for applying styles. in coreldraw x4. where is it?
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
We have a new Roland printer, an LEJ-640, which prints in CMYK plus white and clear gloss.
In order to print a white bitmap, I must apply a spot color to the bitmap. I used the Bitmap|Mode|Dutone to apply the white spot color and it seems to work correctly--it shows up as a spot color when I use the print dialog to preview separations.
When I use either print to file with the RolandVW print driver or File|Publish to PDF, the spot color on the bitmap is not preserved, Versaworks does not recognize it as a spot color. Color output is set to "Native". However, a vector object on the same page with the same spot color applied is recognized as a spot color.
The pink part in the versaworks screenshot indicates white spot color, as you can see only the vector object is recognized.
Is there a way to pick exact colour for para text and apply to the rest of the text? I tried the Eyedropper tool but can't seem to do this for paragraph text. I can pick exact sample but can only apply to the rest of the text body.
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
OS: MS Windows7 Ultimate x64, v6.1.7601 SP1 build 7601
PC Config.: Intel Core2Quad CPU Q6600 @ 2.4GHz, DG33FB, 8GB RAM
CDGS x6 (64 bit) v16.0.0.707
1. Facing problem of frequent CorelDraw X6 crash while working and seemingly most of the times it even don't sent any error messages to Corel support.
2. Transformations docker doesn't accept enter for applying changes, it only responds when we hit apply. It is good to move through options by using TAB, but it should accept ENTER as “APPLY” as we make desired change in any parameter. Mostly I prefer dockers to property bar.
3. Open and Import dialogue boxes don’t get cancelled as we hit ESC key.
4. Using pick tool double click a group of objects including paragraph text and get desired rotation is still a havoc despite we are using x6 (64-bit). It kills much of our time. See screen shot below:
5. I am also facing problem in EPS editable import as shown in the screen shot below "An error occurred while processing PIEE.eps. The file cannot be opened."
The file is created in x6 and has 2 pages for two print jobs. Both pages has flatten background text and fountain lenses to RGB bitmap. All texts converted to curves. Page 1 exported to EPS and then imported as EPS editable successfully. Page 2 exported to EPS and then imported as EPS editable - shown above error. I have also tried importing this page to a fresh file and then created fresh EPS but got the same erroneous result.
As far as my experience with PDF is not good, because sometimes PDF also produces undesired result on RIP specially as RGB images, bar codes, drop shadows etc. I believe that EPS files are far more reliable in prepress jobs.
transparency bug.jpg.....transparency is not applying properly for the inverse white to black gradient, check the attachment.
View 12 Replies View RelatedI removed text from a rectangle and that message keep displaying in that rectangle.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
how to curve text within a shape, as paragraph text, not artistic text? (See my attached image.)
I have drawn the shape, inserted the text as paragraph text, but the text always wants to sit straight. I am so frustrated as I can find a workaround in either Corel or Adobe CS products. I have tried using artistic text in Corel, but have to do it line by line - and this brings other problems, such as I cant justify each line with each other, and sometimes a character jumps up relative to the other characters and the entire paragraph does not taper in...so this is not a solution, apart from the fact it will take me FOREVER to insert line by line....I would like to treat the text as a multiple line paragraph, and follow the shape.
In the last 2 days Corel has decided to start changing Artistic Text to Paragraph Text when I copy & paste it across documents, completely changing the font, size & colour of what I am copying.
I've just done a factory reset & it's still doing it.
I don't recall doing anything that would change a setting.
The text I am copy & pasting are disclaimers that are all set on 1 document & I copy & paste them to a proof as needed.
I need to draw a 3D (style) football. The white segments are hexagons and the black are pentagons as in the attached picture. Of course, these won't match up correctly whilst lying flat as a football is round. How do I create the illusion of this? And the shading etc?
View 14 Replies View RelatedIm looking for some block style numbers for race cars. What fonts do you recommend or what websites do you recommend me to look at? I do a lot of graphics for race cars, go karts, dirt bikes etc. so im looking for some numbers that will really stand out and look good.
View 6 Replies View RelatedQQ截图20120523105022.png
Strokes list inside style pattern is not displayed inthe art of pen tool, but can be used normally.
How To i Make Black Outline Inside And Outside Of Thease Styles With Corel Draw ?
And Then I Want To Remove Gray Color Only Need Black Outlines
I recently started working on coreldraw x5, but i am having trouble saving a print style and getting the default colour management settings, i dont know if i missed something or did something wrong, but i dont even have those options on my program
View 1 Replies View Relatedis it possible to create a style for formating cells in a table in CDX6?I mean to format aligninig, text formating /font, margins and stuff like that?
Now I have to do a infoguide for my city and have to put in a lot of info - restaurants, hotels etc. Probably 300 and more and the best way is to use the great table tool. BUT it will be fatastic if I can format cells with style because with easy I can import xls file in Corel and the good news is that it recognise it as a table so the formating is the next step.After that selecting cells, changing fonts, margins etc. is a painfull job to do.
If you take blend tool to gate one color to other or same or gray scale it give correct result. But if you use New color style and new gradient it show wrong effect in CMYK.
View 6 Replies View Related