This is a problem that comes from previous versions. When applying a figure using Wrap resource to a Paragraph Text in columns: most of times the basis of the text is not aligned correctly.
View 2 Replies
I have a document of 300 pages or so of flowing text which I wish to edit into chapters.
Ideally I would like to select the start of a line of text and place it at the top of a page where it will then stay without breaking the paragraph links, as in Word (this also maintains the word count across the whole document).
Alternatively, could I simply break the paragraph links? When I attempt this now with Arrange/Break Paragraph Text, all that happens is
that a new page with an unlinked text frame appears, but the 'before' and 'after' pages are still linked, which defeats the objective.
The only way I've found to divide the document up is to copy it whole and then delete pages before and after the required chapter breaks and then reassemble them into one document, which is pretty laborious.
I'm sure I'm missing something really basic here.
I am doing a job with columns of donor names (originating from a Word file). Most of the lines space just fine but occasionally there is a 'phantom line' for want of a better term, sort of like I've gone from single spacing to 1.5 or so.
The thing is my paragraph text stats don't change... I highlight good lines - they show as 100%, I highlight the troublesome section, it shows as 100% and there is nothing in the Word file to show that this originated there.
As the job needs to get out the door, I'll just cut out the offending bits, make them artistic text and drop them back in to fit properly. WIth more than a thousand names this is getting pretty old pretty quick.
why the bounding box is so wrong when exporting paragraph text as EPS and placing it in InDesign or opening in Photoshop? See screenshots below. Text is being convert to curves in the EPS export dialog box.
At one point today, I was exporting an entire 8.5x11 page with a small block of paragraph text in the middle and it came into InDesign at 10x11".
Draw 16.3.0.1114, Ghostscript GPL 8.64
My boss has produced a layout that has images, artistic text and paragraph text and wants the whole thing half the size. Obviously the paragraph text doesn't just scale down when everything is grouped, do I just select the paragraph text and convert it to artistic text ?
View 13 Replies View RelatedI removed text from a rectangle and that message keep displaying in that rectangle.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
how to curve text within a shape, as paragraph text, not artistic text? (See my attached image.)
I have drawn the shape, inserted the text as paragraph text, but the text always wants to sit straight. I am so frustrated as I can find a workaround in either Corel or Adobe CS products. I have tried using artistic text in Corel, but have to do it line by line - and this brings other problems, such as I cant justify each line with each other, and sometimes a character jumps up relative to the other characters and the entire paragraph does not taper in...so this is not a solution, apart from the fact it will take me FOREVER to insert line by line....I would like to treat the text as a multiple line paragraph, and follow the shape.
I used to click on the A in the toolbox and look up on the menu to change between paragraph text and artistic text but I can't find that icon or any icons to choose paragraph text. It eludes in customizing the tookbox too?
How do I get that paragraph text tool to show up in menus, bars and the toolbox?
I have some 20 pages file and used 2 font in it. Now when I look in Text - Text Statistics it is showing 6 different fonts other then I have used. I try to look in object manager it is showing paragraph text with only one font. How to find out the fonts that is not used by me.
View 1 Replies View RelatedIn the last 2 days Corel has decided to start changing Artistic Text to Paragraph Text when I copy & paste it across documents, completely changing the font, size & colour of what I am copying.
I've just done a factory reset & it's still doing it.
I don't recall doing anything that would change a setting.
The text I am copy & pasting are disclaimers that are all set on 1 document & I copy & paste them to a proof as needed.
Every time I type text into a box (wrap) it's invisible - maybe white (but background is white, so it look invisible). How to set the color by default. Back to black.
View 6 Replies View RelatedI can't see the text in several paragraph text boxes but they print fine. The outline is red on-screen but the contents aren't visable unless I print it.
Can I do something to the file, clean it, save as, reindex it, re-build it ?
I need to hide the dotted boxes that are now showing in X3 around all paragraph text on maybe 1000 business slides I created 5 to 10 years ago and now want to update.
Changing to artistic text does make the dotted boxes go away but is there a master setting that would make them go away in paragraph text?
Five to ten years ago I created maybe 1000 busness slides in CorelDraw and then moved their images to Powerpoint. Versions used were 11 and X3.
Now when I want to dust them all off and freshen them I find dotted boxes around .
After typing in a shape. I decide to change the color fill of that object. But I can't see the text anymore.
View 3 Replies View RelatedWith a number of of paragraph text objects selected, the interactive rotate becomes increasingly sluggish in keeping up with my mouse position when dragging round. I've got a calendar artwork with 12 paragraph objects, and after I've let go of the mouse button, the screen will continue trying to update for anything up to 10 seconds afterwards, during which time I can't do anything.
View 6 Replies View RelatedI have designed a C# application to To Print I Cards Of School. Here I am sending data from my application to a CDR FILE (Already Created ) Which Contains ADDRESS Text Field..Now I Need to Print Address(which contains 60 characters or more) on this Text field .
I Have Used The following c# Code.. To Replace Address text field that contains text 'Address '.....
s.Text.Replace('Address',"Text To be replaced .......")...here s is Active shape...
This Works Fine But How can i WRAP TEXT....of Address field.
In my one file I am unable to do copy and past command in paragraph text mode in one particular paragraph text handle. Can't find the reason. But in same file with new artistic or paragraph text handle I can do copy and past.
View 3 Replies View RelatedI'm trying to wrap an image around a curved object. This is a front elevation of a sign I am attempting to render and the sign wraps around a pole. What I am attempting to do is not just "squeeze" the copy but actually attempt to show what the image will look like if you are looking directly at it which means that the closest portion of the image will look normal but as you look further out towards the edges then the graphic and copy would appear to merge and disappear backwards. I hope I am explaining this well. I am trying to wrap my brain around this concept. I know you can do this in photoshop with stretching but cannot fathom how I can attempt this in CorelDraw or Illustrator.
View 14 Replies View RelatedI know about all of the normal selection methods in CorelDraw, but is there a Macro or some way to do an irregular marquee selection?
View 3 Replies View Relatedhow to apply a mesh fill to an irregular object other that using powerclip?
View 6 Replies View RelatedEasy enough in ID and Ill, sure. However, how do you wrap text around an irregular shaped object in Photoshop?
View 1 Replies View RelatedI really want to learn how to wrap an object to a sphere... is there any way to do it? or a tool? For example is an arrow wrapping around a sphere?
View 4 Replies View RelatedOne of the things I print in my business are mugs. The printable surface is 275 x 75 mm.
I would like to know if it is possible to show a visual impression of a mug with the design wrapped around it. I have X4.
One of the things I print in my business are mugs. The printable surface is 275 x 75 mm.
I would like to know if it is possible to show a visual impression of a mug with the design wrapped around it.
I have X4.
How can I apply edited paragraph style to all at once.
I mean I have created new paragraph style with 10 pt Arial font and applied to different paragraph. And now I have edited the same paragraph style with 16 pt. Arial font, now how it will applied at once to all old style that I have used.
How do I remove the "paragraph" symbol or turn it off??????
It wasnt on when i first installed it last week and i must have turned it on by accident...and there is not a button that i can see to turn it off like in ms word.
Words in a paragraph are splitting into different lines when it gets to the end of a line. How do I stop words from splitting into different lines in a paragraph.
View 4 Replies View RelatedI have set Ariel as my default font for paragraph & artist text with 12 pt.. On making some change of text with font say to New Times Roman 18 pt. then the new artist text or paragraph text is 18 pt. as default font.
View 2 Replies View RelatedI am having trouble w/ entering text that will auto wrap. I am using PS 6. I drag the text box (which should put me in paragraph mode) and when I type, the words 'disappear' off the edge of the text box instead of auto wrap.
If I hit enter, the next line jumps to the bottom of page/box.
I don't want to have to type each line as a separate text box, but so far that is the only way to get it to work.
I need to create a gold bar in the shape of the map of Texas that looks 3D. I need it to look real. I have a pic of a gold bar with the embossed 999.9 and the serial number. I have taken an outline of the map and extruded it so it looks 3D. I cannot figure out how to fill the extrusion with the bitmap. I want to wrap it so it looks like real gold on the front and sides with embossing undistorted. I am using Draw X4.
View 12 Replies View RelatedI want to align an object (i.e a rectangle) for example to be in possition x:15cm and y:12,5cm but concerning the edge of the rectangle (or the right/left side of the rectangle) and NOT the center of it.
How to customize the properties of the alignment???
