I have some 20 pages file and used 2 font in it. Now when I look in Text - Text Statistics it is showing 6 different fonts other then I have used. I try to look in object manager it is showing paragraph text with only one font. How to find out the fonts that is not used by me.
View 1 RepliesI have a document of 300 pages or so of flowing text which I wish to edit into chapters.
Ideally I would like to select the start of a line of text and place it at the top of a page where it will then stay without breaking the paragraph links, as in Word (this also maintains the word count across the whole document).
Alternatively, could I simply break the paragraph links? When I attempt this now with Arrange/Break Paragraph Text, all that happens is
that a new page with an unlinked text frame appears, but the 'before' and 'after' pages are still linked, which defeats the objective.
The only way I've found to divide the document up is to copy it whole and then delete pages before and after the required chapter breaks and then reassemble them into one document, which is pretty laborious.
I'm sure I'm missing something really basic here.
I am doing a job with columns of donor names (originating from a Word file). Most of the lines space just fine but occasionally there is a 'phantom line' for want of a better term, sort of like I've gone from single spacing to 1.5 or so.
The thing is my paragraph text stats don't change... I highlight good lines - they show as 100%, I highlight the troublesome section, it shows as 100% and there is nothing in the Word file to show that this originated there.
As the job needs to get out the door, I'll just cut out the offending bits, make them artistic text and drop them back in to fit properly. WIth more than a thousand names this is getting pretty old pretty quick.
why the bounding box is so wrong when exporting paragraph text as EPS and placing it in InDesign or opening in Photoshop? See screenshots below. Text is being convert to curves in the EPS export dialog box.
At one point today, I was exporting an entire 8.5x11 page with a small block of paragraph text in the middle and it came into InDesign at 10x11".
Draw 16.3.0.1114, Ghostscript GPL 8.64
My boss has produced a layout that has images, artistic text and paragraph text and wants the whole thing half the size. Obviously the paragraph text doesn't just scale down when everything is grouped, do I just select the paragraph text and convert it to artistic text ?
View 13 Replies View RelatedI've recently upgraded to Corel Draw X6 via download, however I can't find the additional specialized fonts, templates, etc which are supposed to come with it.
View 7 Replies View RelatedI removed text from a rectangle and that message keep displaying in that rectangle.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
how to curve text within a shape, as paragraph text, not artistic text? (See my attached image.)
I have drawn the shape, inserted the text as paragraph text, but the text always wants to sit straight. I am so frustrated as I can find a workaround in either Corel or Adobe CS products. I have tried using artistic text in Corel, but have to do it line by line - and this brings other problems, such as I cant justify each line with each other, and sometimes a character jumps up relative to the other characters and the entire paragraph does not taper in...so this is not a solution, apart from the fact it will take me FOREVER to insert line by line....I would like to treat the text as a multiple line paragraph, and follow the shape.
I used to click on the A in the toolbox and look up on the menu to change between paragraph text and artistic text but I can't find that icon or any icons to choose paragraph text. It eludes in customizing the tookbox too?
How do I get that paragraph text tool to show up in menus, bars and the toolbox?
In the last 2 days Corel has decided to start changing Artistic Text to Paragraph Text when I copy & paste it across documents, completely changing the font, size & colour of what I am copying.
I've just done a factory reset & it's still doing it.
I don't recall doing anything that would change a setting.
The text I am copy & pasting are disclaimers that are all set on 1 document & I copy & paste them to a proof as needed.
I can't see the text in several paragraph text boxes but they print fine. The outline is red on-screen but the contents aren't visable unless I print it.
Can I do something to the file, clean it, save as, reindex it, re-build it ?
I need to hide the dotted boxes that are now showing in X3 around all paragraph text on maybe 1000 business slides I created 5 to 10 years ago and now want to update.
Changing to artistic text does make the dotted boxes go away but is there a master setting that would make them go away in paragraph text?
Five to ten years ago I created maybe 1000 busness slides in CorelDraw and then moved their images to Powerpoint. Versions used were 11 and X3.
Now when I want to dust them all off and freshen them I find dotted boxes around .
With a number of of paragraph text objects selected, the interactive rotate becomes increasingly sluggish in keeping up with my mouse position when dragging round. I've got a calendar artwork with 12 paragraph objects, and after I've let go of the mouse button, the screen will continue trying to update for anything up to 10 seconds afterwards, during which time I can't do anything.
View 6 Replies View RelatedThis is a problem that comes from previous versions. When applying a figure using Wrap resource to a Paragraph Text in columns: most of times the basis of the text is not aligned correctly.
View 2 Replies View RelatedIn my one file I am unable to do copy and past command in paragraph text mode in one particular paragraph text handle. Can't find the reason. But in same file with new artistic or paragraph text handle I can do copy and past.
View 3 Replies View Relatedissues using True Type Fonts when printing some text through CorelDraw x6. Basically I do screen printing, and I have issues printing TTF's... The text when it prints out chops letters/adds spacing where its not needed, and towards the end of the sheet of vellum - starts to print the first letter of word on the left over again...
I haven't had issues printing off of my HP printer, but that broke so I invested in a BROTHER HL-2230 monochrome laser printer.
I used the "find and replace text" and although my spelling was correct, it dindn't "find" it... But now the box wont go away and I cannot do ANYTHING on my page!!!
View 2 Replies View RelatedCorelDraw X6.Since the last update, some of the subsequent fonts in a list will not apply to the selected text.
View 14 Replies View RelatedAlign & Distribute doesn't work for Text / Fonts
View 1 Replies View RelatedI cannot find the default Placeholder Text Folder.In 'My Documents, I have 2 Corel folders:In the first one, it contains: Content X6.Inside of it, it contains 5 folders:1- Bitmap Patterns, 2- Image Lists, 3- Photo Frames, 4- Templates and 5- Vector Patterns.and there's no RTF Placeholder file.In the Second Corel folder, it contains: Corel Content.Inside of it, it contains 3 folders: 1- Bitmap Pattern, 2- Trays and 3- Vector Patterns. and there's no RTF Placeholder file.
View 14 Replies View Relatedfonts withs parts of letter missing in a few fonts when sent to cut/plot
View 10 Replies View RelatedHow can I apply edited paragraph style to all at once.
I mean I have created new paragraph style with 10 pt Arial font and applied to different paragraph. And now I have edited the same paragraph style with 16 pt. Arial font, now how it will applied at once to all old style that I have used.
How do I remove the "paragraph" symbol or turn it off??????
It wasnt on when i first installed it last week and i must have turned it on by accident...and there is not a button that i can see to turn it off like in ms word.
Words in a paragraph are splitting into different lines when it gets to the end of a line. How do I stop words from splitting into different lines in a paragraph.
View 4 Replies View RelatedI have set Ariel as my default font for paragraph & artist text with 12 pt.. On making some change of text with font say to New Times Roman 18 pt. then the new artist text or paragraph text is 18 pt. as default font.
View 2 Replies View RelatedWhen I installed X5 on my XP Pro computer, I up graded from Windows SP2 to SP3. Than I installed Corel Draw X5. Ever since I did that I can't see my text on the screen unless I use the pointer. Also, I can't see the fonts in the font list. Add to that, it even made my X4 do the same thing. However, I can use X3 with no problems with the fonts. I have un-installed and re-installed it more then once.
View 6 Replies View RelatedI converted a DXF file to a Corel Designer file. This DXF file also has some dimensions which turned into paragraph text. This paragraph text is turned by 90 degrees. The font size is rather small, so I increased it by some points. As the paragraph text frames were now too small, I tried to increase their size. However, the text frames always jump back to their original size.
I experimented a little bit and noticed that this is only, if the text is turned by 90 or 270 degrees. If the text frame is not turned or turned by 180 degrees, you can change the size of the text frame. Additionally this problem arises only, if the option "Expand and shrink paragraph text frames to fit text" is activated (in Tools | Options | Workspace | Text). Sometimes some text frames were adapted automatically, when I changed this option. However, I do not know when which text frame was changed.
Corel Designer X6, service pack 1
font issues with X6.2, ever since the last update certain fonts basically don't appear on the documents once they are open, even although they are there in the preview. I've reinstalled the fonts in question, but still nothing. They work in other applications.
On the image below you will see the small squares, this is the size f the object, the dots in a line are the. actual words of text. The font(s) in this job is Omnes regular and medium, which are Open Type fonts.
In CorelDraw x6 the drop down list of fonts in now out of alphabetical order. The order seems completely random and I can not tell what order it has decided to use. Is there a solution to this error?
View 12 Replies View RelatedI am currently working with gnuplot and some graphical output I want to postprocess in corel. I get a correct .eps file however when I want to import those files I get some font problem. For example: my degree symbol ° gets somewhat confused with another letter é. Same goes for some symbols like the greek theta. In gnuplot I use that /Symbol t for theta and its also correct in the output. However if it goes to corel it gets confused with these symbols and imports the curves wrong.
View 8 Replies View RelatedI'm new with Corel and I'm creating a banner and logo for a nonprofit organization as a volunteer. I have two or three questions. How do I divide a vector horizontally and vertically? How do I use a downloaded font in Corel? I can't import it in. Is there another way?
View 4 Replies View Related