Words in a paragraph are splitting into different lines when it gets to the end of a line. How do I stop words from splitting into different lines in a paragraph.
View 4 Replies
i'm new to this, is there a way to split a paragraph text per line but will still be an editable text?
I have to select each line, cut. then paste each for me to do it, is there an easier way to do this?
I need to split a square in half - so I have 2 triangles but so they are still aligned as a square.
I need to be able to change the colour of each half independently.
I am just curious if it is possible to take say a 100 page .cdr file and split it up into perhaps five 20 page .cdr files in a more or less automatic manner.
Sure, I can copy/paste the pages individually, but if this is possible it can save valuable time, energy and maybe even my sanity (if that is even possible).
I was trying this Printing Merge many times. I noted that I could run the Printing Merge only with English Words because when I tried other languages such as Chinese and Khmer. Most of my words became error, so I really couldn't use it as needed. Is the Printing Merge used only with English?
On the contrary, I used to use the Printing Merge in MS Word. It works with all languages. I want to use the Printing Merge in Coreldraw 12 beside English.
I have a document of 300 pages or so of flowing text which I wish to edit into chapters.
Ideally I would like to select the start of a line of text and place it at the top of a page where it will then stay without breaking the paragraph links, as in Word (this also maintains the word count across the whole document).
Alternatively, could I simply break the paragraph links? When I attempt this now with Arrange/Break Paragraph Text, all that happens is
that a new page with an unlinked text frame appears, but the 'before' and 'after' pages are still linked, which defeats the objective.
The only way I've found to divide the document up is to copy it whole and then delete pages before and after the required chapter breaks and then reassemble them into one document, which is pretty laborious.
I'm sure I'm missing something really basic here.
I am doing a job with columns of donor names (originating from a Word file). Most of the lines space just fine but occasionally there is a 'phantom line' for want of a better term, sort of like I've gone from single spacing to 1.5 or so.
The thing is my paragraph text stats don't change... I highlight good lines - they show as 100%, I highlight the troublesome section, it shows as 100% and there is nothing in the Word file to show that this originated there.
As the job needs to get out the door, I'll just cut out the offending bits, make them artistic text and drop them back in to fit properly. WIth more than a thousand names this is getting pretty old pretty quick.
why the bounding box is so wrong when exporting paragraph text as EPS and placing it in InDesign or opening in Photoshop? See screenshots below. Text is being convert to curves in the EPS export dialog box.
At one point today, I was exporting an entire 8.5x11 page with a small block of paragraph text in the middle and it came into InDesign at 10x11".
Draw 16.3.0.1114, Ghostscript GPL 8.64
My boss has produced a layout that has images, artistic text and paragraph text and wants the whole thing half the size. Obviously the paragraph text doesn't just scale down when everything is grouped, do I just select the paragraph text and convert it to artistic text ?
View 13 Replies View RelatedI used to click on the A in the toolbox and look up on the menu to change between paragraph text and artistic text but I can't find that icon or any icons to choose paragraph text. It eludes in customizing the tookbox too?
How do I get that paragraph text tool to show up in menus, bars and the toolbox?
I have some 20 pages file and used 2 font in it. Now when I look in Text - Text Statistics it is showing 6 different fonts other then I have used. I try to look in object manager it is showing paragraph text with only one font. How to find out the fonts that is not used by me.
View 1 Replies View RelatedHow can I apply edited paragraph style to all at once.
I mean I have created new paragraph style with 10 pt Arial font and applied to different paragraph. And now I have edited the same paragraph style with 16 pt. Arial font, now how it will applied at once to all old style that I have used.
How do I remove the "paragraph" symbol or turn it off??????
It wasnt on when i first installed it last week and i must have turned it on by accident...and there is not a button that i can see to turn it off like in ms word.
I have set Ariel as my default font for paragraph & artist text with 12 pt.. On making some change of text with font say to New Times Roman 18 pt. then the new artist text or paragraph text is 18 pt. as default font.
View 2 Replies View RelatedI can't see the text in several paragraph text boxes but they print fine. The outline is red on-screen but the contents aren't visable unless I print it.
Can I do something to the file, clean it, save as, reindex it, re-build it ?
I need to hide the dotted boxes that are now showing in X3 around all paragraph text on maybe 1000 business slides I created 5 to 10 years ago and now want to update.
Changing to artistic text does make the dotted boxes go away but is there a master setting that would make them go away in paragraph text?
Five to ten years ago I created maybe 1000 busness slides in CorelDraw and then moved their images to Powerpoint. Versions used were 11 and X3.
Now when I want to dust them all off and freshen them I find dotted boxes around .
With a number of of paragraph text objects selected, the interactive rotate becomes increasingly sluggish in keeping up with my mouse position when dragging round. I've got a calendar artwork with 12 paragraph objects, and after I've let go of the mouse button, the screen will continue trying to update for anything up to 10 seconds afterwards, during which time I can't do anything.
View 6 Replies View RelatedThis is a problem that comes from previous versions. When applying a figure using Wrap resource to a Paragraph Text in columns: most of times the basis of the text is not aligned correctly.
View 2 Replies View RelatedIn my one file I am unable to do copy and past command in paragraph text mode in one particular paragraph text handle. Can't find the reason. But in same file with new artistic or paragraph text handle I can do copy and past.
View 3 Replies View RelatedI removed text from a rectangle and that message keep displaying in that rectangle.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
how to curve text within a shape, as paragraph text, not artistic text? (See my attached image.)
I have drawn the shape, inserted the text as paragraph text, but the text always wants to sit straight. I am so frustrated as I can find a workaround in either Corel or Adobe CS products. I have tried using artistic text in Corel, but have to do it line by line - and this brings other problems, such as I cant justify each line with each other, and sometimes a character jumps up relative to the other characters and the entire paragraph does not taper in...so this is not a solution, apart from the fact it will take me FOREVER to insert line by line....I would like to treat the text as a multiple line paragraph, and follow the shape.
In the last 2 days Corel has decided to start changing Artistic Text to Paragraph Text when I copy & paste it across documents, completely changing the font, size & colour of what I am copying.
I've just done a factory reset & it's still doing it.
I don't recall doing anything that would change a setting.
The text I am copy & pasting are disclaimers that are all set on 1 document & I copy & paste them to a proof as needed.
how to mirror about a line, but the line was outside the object.
I now have a need to mirror about a line but the line is partially inside the object (so after mirroring the object would be overlapped). When I select both objects and try to create the mirror, the "axis" of the reflection is simply the edge of the object, not the line.
When the line was outside, that worked simply because when you selected both objects the line brought the outside of both selected objects to that point so it simply mirrored / reflected at that point (the line). So the line was not truly acting as a point of reflection. Hope that made sense.
I think I'm about to buy Cadtools from Macromonster but I would like to know if Draw has a way of acheiving this. Hey I may find out Cadtools can't reflect when the line is inside the object.
I would like to add the effect of hand stitched thread around some of my designs. The line tool can change a line to dashes but this is a bit too uniform for hand stitching. I have seen a tutorial on doing this in Photoshop where a brush is made with a few small different length strokes. this is then spaced out and made to follow a path. how to create a hand stitch effect using X5 that looks like natural hand stitching...
View 4 Replies View RelatedI use Coreldraw 11. and how to make one Line connect to another Line?
I know there is a way you select both Lines and have Coreldraw auto connect them?
I'm out of practice with Corel since it has been several years since using it. I'm trying to create a point on top of a line without adding a point to an existing line but for the life of me I can't figure out how. I know I can create a new line and drag the points to where I want them on the line but I just simply want to create a point on top of the line.
View 10 Replies View RelatedHere I have some blue line features. Then I drawn another red line passing through these features. I am trying to cut blue feature wherever red line intersects. how can I achieve this?
View 13 Replies View RelatedIve got Coral draw 12. What I want to do is to change normal text to a line so that my laser cutter can pick up the fact that its a line to cut and not an engrave. Or is that not possible? if so what program would i need?
View 5 Replies View Relatedin earlier versions of draw you could move one end of line with the pick tool by moving the cursor over the end node grabbing it and moving it where ever you wanted. With x5 it seems that you must go to the node editing tool to select the node. Is there a setting I'm missing that will allow the pick tool to select node?
View 5 Replies View RelatedI am trying to create the cut contour line in X6 and cannot find information on how to do it anywhere.
View 13 Replies View RelatedI am making a 1/4" line around the building number sign I am trying to design, I would like it to be around a 1/4" in from the outer edge and have rounded corners like the sign material.
View 6 Replies View Related
