Ive got Coral draw 12. What I want to do is to change normal text to a line so that my laser cutter can pick up the fact that its a line to cut and not an engrave. Or is that not possible? if so what program would i need?
View 5 RepliesI use Coreldraw 11. and how to make one Line connect to another Line?
I know there is a way you select both Lines and have Coreldraw auto connect them?
Is there any possibility to bring the artistic text ... having many lines to a single line, despite of manually bringing them to the single line .
View 4 Replies View RelatedI recently purchased Graphics Suite X5 and find I'm having difficulty in getting an accurate sizing to my text height. When I set the text height to be 3" and then start typing, the letter height comes back to me around 2 1/8". I did find another place to set the height but that is only after I finish my lettering. How to resolve this so I don't re-invent the wheel each time I set the lettering to my designs?
I am also having some difficulty with line spacing. I need line space in inches and the software seems to be set on a pt setting with no way to change it to inches.
CorelDraw Graphics Suite X5; Version 15.2.0.686
Mainframe is Lenovo ThinkCentre; M Series
Windows 7 64 bit/32bit
test.cdr
Bug in this file. Click the text in the dimensions. It jumps up a line.
In X5, I was able to edit the position of the line for underline text : Thickness and position, up or down in %
The last command for Characters Effect | Underline was « Modified... »
Cannot find it in X6 ! It's not available in the same menu !
When i use margue select i get the blue dotted line but it disapears when i let go of the mouse and nothing is selected, this happens no mater what i'm trying to select. Do i not understanding how it works?
Second dumb question.
I have hit or miss luck with the weld feature some times it works and other times it simply will not work. I'm trying to make a small metal sign and need solid numbers (not Stencil) I draw a rectangle and add text above it and move it down to the top of the rectangle and select both and hit weld, some times it works and some times it doesn't. I have also tried to weld text to a 2 point line and cant do that at all, I suspect the 2 poing line is considered a demensional line so that may be my problem there. I have spent the greater part of a day trying to figue out thes two problems I have watched Graphics unleshed and read all i can find and still haven't figured out if it is me or the program. I have the problem with any of the fonts that come with X5.
when I switch tab once at the end of the line sits the line break outside of the paragraph text frame..The background color so then runs out of the frame.A wish at left line intent (or right) it should be possible to fill these also with the background color and a function that assigns every second line is a background color..
View 2 Replies View Relatedhow to make a template for arched text? I have a basic layout for the text, see screen shot. I want to be able to enter in whatever name I want and have the first and last letters be larger with the overall text on an arch.
View 4 Replies View RelatedI'm having problems exporting a logo to a png or jpg the top line of curved text (MWW) keeps disappearing. It's probably really simple, but damn its annoying. File is on rapid share [URL ...
View 5 Replies View RelatedIs it possible to assign a type of link to an object or text where the user can open the document and click on the object which is on the first page and it will take them to a specified page set by the link? This is kind of like web design but not, know what I mean?
View 4 Replies View Relatedthrough some difficulty I'm having in getting the leading (ie, line spacing) I want with artistic text, in CorelDraw 12? I have three lines of text, the first line of which has a font size of 20 pt, and the second and third lines having a font size of 13 pt. The default leading is greater between the first and second lines than between the second and third -- probably due to the font size difference. I would like to make the leading equal for all lines, regardless of font size, but can't figure out how to do that. "Format Text - Spacing - Lines" seems to offer leading only in relation to character height -- which automatically makes the leading between the first and second line larger (due to the larger font size used in the first line) than it is between the subsequent lines.
View 5 Replies View RelatedIs there a way to make a object with straight lines to change the straight line to be undulated like a curly.
View 14 Replies View Relatedhow to mirror about a line, but the line was outside the object.
I now have a need to mirror about a line but the line is partially inside the object (so after mirroring the object would be overlapped). When I select both objects and try to create the mirror, the "axis" of the reflection is simply the edge of the object, not the line.
When the line was outside, that worked simply because when you selected both objects the line brought the outside of both selected objects to that point so it simply mirrored / reflected at that point (the line). So the line was not truly acting as a point of reflection. Hope that made sense.
I think I'm about to buy Cadtools from Macromonster but I would like to know if Draw has a way of acheiving this. Hey I may find out Cadtools can't reflect when the line is inside the object.
I would like to add the effect of hand stitched thread around some of my designs. The line tool can change a line to dashes but this is a bit too uniform for hand stitching. I have seen a tutorial on doing this in Photoshop where a brush is made with a few small different length strokes. this is then spaced out and made to follow a path. how to create a hand stitch effect using X5 that looks like natural hand stitching...
View 4 Replies View RelatedI'm out of practice with Corel since it has been several years since using it. I'm trying to create a point on top of a line without adding a point to an existing line but for the life of me I can't figure out how. I know I can create a new line and drag the points to where I want them on the line but I just simply want to create a point on top of the line.
View 10 Replies View Relatedcan i make halftones from a cdr file to make printing offset plates?
View 3 Replies View RelatedHere I have some blue line features. Then I drawn another red line passing through these features. I am trying to cut blue feature wherever red line intersects. how can I achieve this?
View 13 Replies View Relatedwhy (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
We are having a big problem with dropping lines of text or parts of graphics. It is happening on 3 different laser systems and 2 different printers.
View 14 Replies View RelatedOften whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.
View 6 Replies View Relatedin earlier versions of draw you could move one end of line with the pick tool by moving the cursor over the end node grabbing it and moving it where ever you wanted. With x5 it seems that you must go to the node editing tool to select the node. Is there a setting I'm missing that will allow the pick tool to select node?
View 5 Replies View RelatedI am trying to create the cut contour line in X6 and cannot find information on how to do it anywhere.
View 13 Replies View RelatedI am making a 1/4" line around the building number sign I am trying to design, I would like it to be around a 1/4" in from the outer edge and have rounded corners like the sign material.
View 6 Replies View RelatedI am new to Coral Draw x5, and we have just purchased a Roland VersaCamm vs-420, I have an eps file, once i am ready to create a cutline i click shaping > Boundary thats all good, then i can get my cut contour line which is around the image, how can i increase the cut line so i have a 1/2mm white gap around the file im cutting?
View 1 Replies View RelatedHow do I change the properties of a line? I can do it before drawing. What if I want to change after drawing in PhotoPaint?
View 7 Replies View RelatedIs it possible to set a line weight for a different layer, so that when you switch layers the line weight default switches with you?
View 3 Replies View RelatedSay I've drawn a few curves on a layer with the bézier tool, and I want to go back to some that I did earlier and add to them. I'm trying to do this and it won't let me; it wants to start a new line.
View 3 Replies View RelatedI used polyline to trace a tree trunk. I wanted it to be just a series of line segments which I was going to export to AutoCAD and then to Sketchup. However, each segment I drew said it was a curve. When I exported to AutoCAD it came in as a spline. If I convert that to lines, where I had maybe 10 lines there are now 100.
I also tried to 2 point line tool. I started each new line from the end of the previous. It gave me the same result.
Is there a way for me to end up with just the 10 line segments? No spline. No curve. Just 10 straight lines.
I am using CGS12 along with my Epilog laser. The Epilog treats all line-widths up to 0.003" as vector (for cutting) and anything above this as raster (subject to DPI settings).
I have been using 'Hairline' as my vector but recently hit a problem and would like to guarantee that a line defined by a label such as 'Hairline' will always be below 0.003" in width (and therefore a cut-line on the Epilog).
In CDraw X5 I can choose line styles. But I would like to add some more styles (and to remove some that I never use).I only found a possibility to create new styles based on a kind of a pixel approach: A one-by-many array of single squares can be marked to be coloured of white, producing dashed lines with any kind of dash length.Also, the dash "frequency" seems to be dictated by the line width only; I do not manage to make thin dashed lines with a reasonably visible dash frequency.
However, I would like to make line consisting of other shapes, like circles, triangles, diamonds, etc., either filled or "open". Or make thin dashed lines with user-specifiec dash and space lengths that do not change when changing the line width. Is this possible?
Also, multi-colour dashes – with e.g. odd-numbered dashes in one colour and even-numbered ones in another color – might be useful.
In the current version, however, the number of dash schemes available is big enough to be confusing. Especially when the line is made relatively wide – say, 0,5 .. 1 mm or so – and I want to make more lines with the same shape, than it is difficult to find again the same shape the list of standard shapes. Is it possible to add names (or numbers, but not just running numbers!) to the shapes, so that a shape can be found again easily?