In X5, I was able to edit the position of the line for underline text : Thickness and position, up or down in %
The last command for Characters Effect | Underline was « Modified... »
Cannot find it in X6 ! It's not available in the same menu !
I'm getting a weird underline placement on SuperScript text. It should be right up under the "99". Can't change it, even if I use the Node Edit tool.
View 12 Replies View Relatedin earlier versions of draw you could move one end of line with the pick tool by moving the cursor over the end node grabbing it and moving it where ever you wanted. With x5 it seems that you must go to the node editing tool to select the node. Is there a setting I'm missing that will allow the pick tool to select node?
View 5 Replies View RelatedI am new to Coral Draw x5, and we have just purchased a Roland VersaCamm vs-420, I have an eps file, once i am ready to create a cutline i click shaping > Boundary thats all good, then i can get my cut contour line which is around the image, how can i increase the cut line so i have a 1/2mm white gap around the file im cutting?
View 1 Replies View RelatedRecently when completing a project, instead of being able to just click and write text or click on and edit existing text, a 'edit text' pop up box appears. i have looked at the setting and i cant seem to work out what i have done and how to correct this?
View 3 Replies View RelatedHow do you paste a website domain name without causing the underline for hyperlink?
When I copy and paste text which includes a website link [URL] how do I stop or prevent the underline? I have tried changing the options in the page setup for text for automatic Hyperlinks but that does not stop the underline when pasting text
This just started - after editing artistic text it drops down a space or two and has to be repositioned.
Is there a way to stop this?
Yesterday, suddently when editing text in a document, clicking outside of the text edit, CDR crashes:
Runtime error!
Program: c:Program Fi...
This application has requested the Runtime to terminate it in an
unusual way.
Please contact the application's support team for more information.
I have tried to do the tricks, I googled, like resetting to factory, editing the xml file and running as administrator. Nothing works. It is when I edit any font, and in a new document also. AND update of CDR X4 with service pack 2 did not work.
I really got used to the short cut of editing text pressing ctrl+left SHIFT + t , this brings me right into the
text box where I am able to quickly access all the text features, now since last update every time I make a text change in that window my text drops one line down and even though I will hit the cursor to front and back space it bringing it right to top when I hit OK it still drops my text one line down, this has become very annoying...
I love this feature but I am unable to bring it back to its original functional way. I did reinstalled corel , and yes I did reset the application still the same thing is happening.
Whenever I edit text in the pop-up dialog, there is usually an extra line inserted at the top of the text (a blank first line). I can't get rid of this extra line through the pop-up edit window, I can only delete it using the text tool directly on the page. This only started with the latest update.
View 2 Replies View RelatedIn coreldraw x6 selecting text for editing show light blue background. How can I change it to gray as it is in coreldraw x5.
View 7 Replies View RelatedIve got Coral draw 12. What I want to do is to change normal text to a line so that my laser cutter can pick up the fact that its a line to cut and not an engrave. Or is that not possible? if so what program would i need?
View 5 Replies View RelatedIs there any possibility to bring the artistic text ... having many lines to a single line, despite of manually bringing them to the single line .
View 4 Replies View RelatedI recently purchased Graphics Suite X5 and find I'm having difficulty in getting an accurate sizing to my text height. When I set the text height to be 3" and then start typing, the letter height comes back to me around 2 1/8". I did find another place to set the height but that is only after I finish my lettering. How to resolve this so I don't re-invent the wheel each time I set the lettering to my designs?
I am also having some difficulty with line spacing. I need line space in inches and the software seems to be set on a pt setting with no way to change it to inches.
CorelDraw Graphics Suite X5; Version 15.2.0.686
Mainframe is Lenovo ThinkCentre; M Series
Windows 7 64 bit/32bit
test.cdr
Bug in this file. Click the text in the dimensions. It jumps up a line.
When i use margue select i get the blue dotted line but it disapears when i let go of the mouse and nothing is selected, this happens no mater what i'm trying to select. Do i not understanding how it works?
Second dumb question.
I have hit or miss luck with the weld feature some times it works and other times it simply will not work. I'm trying to make a small metal sign and need solid numbers (not Stencil) I draw a rectangle and add text above it and move it down to the top of the rectangle and select both and hit weld, some times it works and some times it doesn't. I have also tried to weld text to a 2 point line and cant do that at all, I suspect the 2 poing line is considered a demensional line so that may be my problem there. I have spent the greater part of a day trying to figue out thes two problems I have watched Graphics unleshed and read all i can find and still haven't figured out if it is me or the program. I have the problem with any of the fonts that come with X5.
when I switch tab once at the end of the line sits the line break outside of the paragraph text frame..The background color so then runs out of the frame.A wish at left line intent (or right) it should be possible to fill these also with the background color and a function that assigns every second line is a background color..
View 2 Replies View RelatedI have a 900 x 500 px image in Adobe Illustrator, which overlaps a bit the canvas on the left side.
When I open this file with Corel, it adjusts my graphics so that it's centered on the screen. The AI file is centered on another point. Also, the canvas Corel creates is A4 sized. I always have to resize the canvas and then manually adjust the position of my graphics.
Question: How can I save an AI file so that when I open it at Corel, the position and size of the canvas will be exactly the same?
I'm having problems exporting a logo to a png or jpg the top line of curved text (MWW) keeps disappearing. It's probably really simple, but damn its annoying. File is on rapid share [URL ...
View 5 Replies View RelatedPlatform specifics: Windows Vista 64bit, Corel graphics Suite X4
Recently (for a month ?), when I open Corel Photo Paint (by any method), the window opens not in a maximized size, but almost, with the upper border just off screen and the right border barely visible on the far right side of the monitor screen. To relocate the PP window I have to place the cursor on the right window border, click (the cursor changes to the left/right cursor), and slide the window to the left . When I do this, the entire PP window "snaps"downward just enough for me to "grab" the upper right corner (the cursor changes to the diagonal arrows). This doesn't occur with the Draw program.
I have tried opening/closing, resizing with new files, no files, old files, from the Taskbar, from the "exe" program, Start menu, the Open with option, etc. Nothing I do will force the opening window to open in the size/location it was lastly closed in (as I remember it doing). Even using the Ctrl key/Exit, as suggested elsewhere here for another's problem.
through some difficulty I'm having in getting the leading (ie, line spacing) I want with artistic text, in CorelDraw 12? I have three lines of text, the first line of which has a font size of 20 pt, and the second and third lines having a font size of 13 pt. The default leading is greater between the first and second lines than between the second and third -- probably due to the font size difference. I would like to make the leading equal for all lines, regardless of font size, but can't figure out how to do that. "Format Text - Spacing - Lines" seems to offer leading only in relation to character height -- which automatically makes the leading between the first and second line larger (due to the larger font size used in the first line) than it is between the subsequent lines.
View 5 Replies View RelatedI am having trouble with the xy axis. They register 0 instead of the actual position of an object. Rulers are showing correctly, and guides show correctly. Recently re-installed X5 and Patches 1-3.
View 4 Replies View RelatedI'm trying to write a script to put printing ticks around the selection. I can get the height and width of the selection, but I cant find anything like "position" or "location" in the methods to get the selections X and Y on the document.
View 5 Replies View RelatedOn my tool barin transformation bar i had position - absolute (coordinates) and size of a selected object.
i changed something and now i have position like 0.00 x 0.00 (i think its relative position) and when i write something in position it moves relative to previous.
when i press alt+f7 i can change position relative and absolute but toolbar don't change. How to set toolbar to show me always absolute position?
i am redrawing an image and used guidelines to insure straight lines. the problem i am having is when i try to put a node on the intersecting lines, it jumps away from where i have placed it. i do not have any of the snap items turned on and am not using a grid in the background. Why will the nodes not go where they are being place? i have been using corel for years and have not had this problem before.
View 8 Replies View RelatedIs there a way to be able to set the position of fountain fill to more than 100? Wasn't this possible in previous versions of Corel Draw?Anyways, I want to achieve the result as shown below. The logical way would be to set position to more than 100, and than to adjust the gradient colors manually to get the look with less curved arch as in gradient on the left side. I think it is obvious why this is very important. I know that there are multiple other ways to achieve this, as you can see that I did (converting to bitmap and crop in this situation in this case), but these are all limited workarounds, and the only "clean" way to do this is as I described.is possible to adjust the gradient in toolbar to more than 100 by mouse dragging it, but it doesn't apply to the object.
View 10 Replies View RelatedI need join open nodes in complex objects. (Import >mechanical design DXF file)
Function close curves work terribly .
I would have to manually select two open nodes on this same position and click "Join two nodes".I have 8000 nodes to join.
I have a document i am designing that has a front and a back to it, its not a business card.
How do i align/position the two sides so i get specific elements where i want them on the back side,
the problem is not with the front and i only need to position the back and specifically, i have checked out the print preview imposition tool and only seems to just print duplicate copies however many times need, unless i used it incorrectly,
I mean i could manually try to set them up and waste a lot of ink and paper positioning the two sides but i believe there is a faster/smarter method to accomplish this.
how to mirror about a line, but the line was outside the object.
I now have a need to mirror about a line but the line is partially inside the object (so after mirroring the object would be overlapped). When I select both objects and try to create the mirror, the "axis" of the reflection is simply the edge of the object, not the line.
When the line was outside, that worked simply because when you selected both objects the line brought the outside of both selected objects to that point so it simply mirrored / reflected at that point (the line). So the line was not truly acting as a point of reflection. Hope that made sense.
I think I'm about to buy Cadtools from Macromonster but I would like to know if Draw has a way of acheiving this. Hey I may find out Cadtools can't reflect when the line is inside the object.
I would like to add the effect of hand stitched thread around some of my designs. The line tool can change a line to dashes but this is a bit too uniform for hand stitching. I have seen a tutorial on doing this in Photoshop where a brush is made with a few small different length strokes. this is then spaced out and made to follow a path. how to create a hand stitch effect using X5 that looks like natural hand stitching...
View 4 Replies View RelatedI use Coreldraw 11. and how to make one Line connect to another Line?
I know there is a way you select both Lines and have Coreldraw auto connect them?