CorelDRAW Graphics Suite X5 :: Line Tool Can Change A Line To Dashes
Aug 15, 2011
I would like to add the effect of hand stitched thread around some of my designs. The line tool can change a line to dashes but this is a bit too uniform for hand stitching. I have seen a tutorial on doing this in Photoshop where a brush is made with a few small different length strokes. this is then spaced out and made to follow a path. how to create a hand stitch effect using X5 that looks like natural hand stitching...
View 4 Replies
ADVERTISEMENT
Apr 13, 2012
How do I change the properties of a line? I can do it before drawing. What if I want to change after drawing in PhotoPaint?
View 7 Replies
View Related
Jun 13, 2011
When you use the line connector, it's supposed to turn two objects into one. This would be great and speed things up rather than combining objects and then drawing lines etc between.
BUT, when you use the tool, the objects are kept separated, and a connector object shows up. It would be great if the 2 objects actually became ONE like the mouse-over description says will happen.
One good reason for the change is that the line that's made can't be changed via the node tool... so you can't make it a curve or add cusps at the end etc.
View 8 Replies
View Related
Jan 4, 2013
how to mirror about a line, but the line was outside the object.
I now have a need to mirror about a line but the line is partially inside the object (so after mirroring the object would be overlapped). When I select both objects and try to create the mirror, the "axis" of the reflection is simply the edge of the object, not the line.
When the line was outside, that worked simply because when you selected both objects the line brought the outside of both selected objects to that point so it simply mirrored / reflected at that point (the line). So the line was not truly acting as a point of reflection. Hope that made sense.
I think I'm about to buy Cadtools from Macromonster but I would like to know if Draw has a way of acheiving this. Hey I may find out Cadtools can't reflect when the line is inside the object.
View 14 Replies
View Related
Jul 1, 2011
I use Coreldraw 11. and how to make one Line connect to another Line?
I know there is a way you select both Lines and have Coreldraw auto connect them?
View 1 Replies
View Related
Apr 8, 2011
I'm out of practice with Corel since it has been several years since using it. I'm trying to create a point on top of a line without adding a point to an existing line but for the life of me I can't figure out how. I know I can create a new line and drag the points to where I want them on the line but I just simply want to create a point on top of the line.
View 10 Replies
View Related
Apr 1, 2011
Is there a way to make a object with straight lines to change the straight line to be undulated like a curly.
View 14 Replies
View Related
Apr 29, 2013
Here I have some blue line features. Then I drawn another red line passing through these features. I am trying to cut blue feature wherever red line intersects. how can I achieve this?
View 13 Replies
View Related
Dec 9, 2011
Ive got Coral draw 12. What I want to do is to change normal text to a line so that my laser cutter can pick up the fact that its a line to cut and not an engrave. Or is that not possible? if so what program would i need?
View 5 Replies
View Related
Mar 11, 2011
in earlier versions of draw you could move one end of line with the pick tool by moving the cursor over the end node grabbing it and moving it where ever you wanted. With x5 it seems that you must go to the node editing tool to select the node. Is there a setting I'm missing that will allow the pick tool to select node?
View 5 Replies
View Related
Apr 10, 2012
I am trying to create the cut contour line in X6 and cannot find information on how to do it anywhere.
View 13 Replies
View Related
Jul 17, 2011
I am making a 1/4" line around the building number sign I am trying to design, I would like it to be around a 1/4" in from the outer edge and have rounded corners like the sign material.
View 6 Replies
View Related
Nov 14, 2011
I am new to Coral Draw x5, and we have just purchased a Roland VersaCamm vs-420, I have an eps file, once i am ready to create a cutline i click shaping > Boundary thats all good, then i can get my cut contour line which is around the image, how can i increase the cut line so i have a 1/2mm white gap around the file im cutting?
View 1 Replies
View Related
Apr 28, 2011
Is it possible to set a line weight for a different layer, so that when you switch layers the line weight default switches with you?
View 3 Replies
View Related
Feb 6, 2013
Say I've drawn a few curves on a layer with the bézier tool, and I want to go back to some that I did earlier and add to them. I'm trying to do this and it won't let me; it wants to start a new line.
View 3 Replies
View Related
Feb 26, 2012
I used polyline to trace a tree trunk. I wanted it to be just a series of line segments which I was going to export to AutoCAD and then to Sketchup. However, each segment I drew said it was a curve. When I exported to AutoCAD it came in as a spline. If I convert that to lines, where I had maybe 10 lines there are now 100.
I also tried to 2 point line tool. I started each new line from the end of the previous. It gave me the same result.
Is there a way for me to end up with just the 10 line segments? No spline. No curve. Just 10 straight lines.
View 12 Replies
View Related
Oct 9, 2013
Is there any possibility to bring the artistic text ... having many lines to a single line, despite of manually bringing them to the single line .
View 4 Replies
View Related
Jun 17, 2011
I am using CGS12 along with my Epilog laser. The Epilog treats all line-widths up to 0.003" as vector (for cutting) and anything above this as raster (subject to DPI settings).
I have been using 'Hairline' as my vector but recently hit a problem and would like to guarantee that a line defined by a label such as 'Hairline' will always be below 0.003" in width (and therefore a cut-line on the Epilog).
View 14 Replies
View Related
Jul 14, 2012
In CDraw X5 I can choose line styles. But I would like to add some more styles (and to remove some that I never use).I only found a possibility to create new styles based on a kind of a pixel approach: A one-by-many array of single squares can be marked to be coloured of white, producing dashed lines with any kind of dash length.Also, the dash "frequency" seems to be dictated by the line width only; I do not manage to make thin dashed lines with a reasonably visible dash frequency.
However, I would like to make line consisting of other shapes, like circles, triangles, diamonds, etc., either filled or "open". Or make thin dashed lines with user-specifiec dash and space lengths that do not change when changing the line width. Is this possible?
Also, multi-colour dashes – with e.g. odd-numbered dashes in one colour and even-numbered ones in another color – might be useful.
In the current version, however, the number of dash schemes available is big enough to be confusing. Especially when the line is made relatively wide – say, 0,5 .. 1 mm or so – and I want to make more lines with the same shape, than it is difficult to find again the same shape the list of standard shapes. Is it possible to add names (or numbers, but not just running numbers!) to the shapes, so that a shape can be found again easily?
View 5 Replies
View Related
Feb 12, 2011
I know this has been in Draw for a long while, but I wish they'd make the arrow tip start at the end of a curve.
steps to reproduce:
F7, draw a curve
draw a line
change both to have an arrow on one end
change both to 16px thickness so you can see the arrow position well
This problem comes up when I'm doing a detailed diagram and I've got my arrows going around all over the place. I need to tweek one so I convert to curve... but in doing so, the end of the arrow sticks out farther than it used to... and that forces me to change the postions and angles of possibly a few nodes.
I'd like the arrow to end at the node so there's no change in it's position when you do a convert to curves.
This is one of those... "that's not a bug, it's been around forever" type of things I know, but it should be changed IMHO.
I should mention that this is also a pain when you go in with the node edit tool when the line isn't selected and you can't see the nodes... you click around at the end, and eventually find it hiding in the center of the arrow/triangle part.
View 14 Replies
View Related
May 23, 2013
In the Object properties Is there a way to reduce the line less than the hairline width.
View 8 Replies
View Related
Jul 14, 2011
I recently purchased Graphics Suite X5 and find I'm having difficulty in getting an accurate sizing to my text height. When I set the text height to be 3" and then start typing, the letter height comes back to me around 2 1/8". I did find another place to set the height but that is only after I finish my lettering. How to resolve this so I don't re-invent the wheel each time I set the lettering to my designs?
I am also having some difficulty with line spacing. I need line space in inches and the software seems to be set on a pt setting with no way to change it to inches.
CorelDraw Graphics Suite X5; Version 15.2.0.686
Mainframe is Lenovo ThinkCentre; M Series
Windows 7 64 bit/32bit
View 2 Replies
View Related
Jun 5, 2012
I create some curves with freehand or 3point curve or else (image on the left). Then I use the artistic media docker to convert it to artistic media. But the artistic media fill is empty.
So I right click on black to fill it, but it fill between the first and last node (image right). Weird.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
View 1 Replies
View Related
Jun 27, 2013
test.cdr
Bug in this file. Click the text in the dimensions. It jumps up a line.
View 11 Replies
View Related
Apr 21, 2013
The upper lip is a vector shape with a fill no outline. The skin is a mesh fill. Why is there a white line around the upper lip shading?
View 2 Replies
View Related
Jun 6, 2011
I have an object that I need to print . It is a cartoon man and a cartoon flag with text next to it . I have printed the whole thing without a cut and it worked fine .
But now I need to print it with the images cut out. I believe I will be able to put a contour around the font easily however the problem is putting it around the flag with man in front of it . right now it makes contours on the inside of the image. Its hard to explain ..... the flag is supposed to be white with blue and red in it . and when I printed it on a big sheet with no contour it was fine .. but now that I need to do it on its own the contour goes inside the flag because there is no rectangle shape around the flag .(no outline around flag) How do I put the rectangle around the flag as well as put a smooth contour around handyman?
View 1 Replies
View Related
Apr 28, 2011
I would like to mark the outline of an object with a dotted line/ the outline should be a dotted line to show that this object can be cut out. But I see only where to choose the thickness of a line.
View 1 Replies
View Related
Jun 11, 2012
I use and really like Corel Draw X3 (almost 3 years) and will keep that version on one P4 computer that runs win xp pro 32 bit.
X3 has been a great version that never crashes but it is getting slow as I increase the number of objects and symbols in my files. I have a new comp with win 7 pro 64 bit running CDraw X6 and the latest epilog 64 bit driver for my mini 24. I have been using the new X6 for 3 days .
In X3 a hairline or .001 is a vector cut. A line width of .005 and above are raster lines and they work well in my Epilog mini 24. I am using a 1.5" diam lens. In X6 a .005 line will not raster but only vectors. If I change it to .006 it becomes a raster line and will engrave OK.
The big Question:
Is there a way to make .005 raster as it did in X3? I have hundreds of files that are all .005 line width. I don't mind changing them but would rather not.
Could this change be because of the latest Epilog 64 bit driver that I am using with win 7 pro? Almost all my files have oddles of very fine detail (.005) and they would look a bit muddy changing the line width to .006.
View 2 Replies
View Related
Feb 10, 2012
I have been using the straight line connector for quite a while now. The lines drawn have always been black. However, I now cant see them! While I am drawing the line, I can see it, but as soon as I click the endpoint, it is invisible. It is still there.....but I cant see it.
View 5 Replies
View Related
Apr 20, 2013
xpgd1.png
In Xara Photo & Graphic Designer, a program that I otherwise don't need, you can combine line qualities, like thin-to-thick, with brushstrokes (see attached sample). Is this possible in CorelDRAW? I've been trying to find a way, with no success.
View 3 Replies
View Related
Aug 6, 2011
I'm trying to get a clean line drawing from a bitmap. I've attached a cdr with a picture in it. I just want the picture to look free-hand drawn with simple lines. When I traced it, it makes jagged edges and seems to be too detailed no matter how I set the trace properties. I cannot draw free-hand myself at all, or I would just re-draw them.
View 10 Replies
View Related
