CorelDRAW Graphics Suite X5 :: Paragraph Text Spacing
Aug 17, 2011
I am doing a job with columns of donor names (originating from a Word file). Most of the lines space just fine but occasionally there is a 'phantom line' for want of a better term, sort of like I've gone from single spacing to 1.5 or so.
The thing is my paragraph text stats don't change... I highlight good lines - they show as 100%, I highlight the troublesome section, it shows as 100% and there is nothing in the Word file to show that this originated there.
As the job needs to get out the door, I'll just cut out the offending bits, make them artistic text and drop them back in to fit properly. WIth more than a thousand names this is getting pretty old pretty quick.
View 3 Replies
ADVERTISEMENT
Nov 23, 2011
I have a document of 300 pages or so of flowing text which I wish to edit into chapters.
Ideally I would like to select the start of a line of text and place it at the top of a page where it will then stay without breaking the paragraph links, as in Word (this also maintains the word count across the whole document).
Alternatively, could I simply break the paragraph links? When I attempt this now with Arrange/Break Paragraph Text, all that happens is
that a new page with an unlinked text frame appears, but the 'before' and 'after' pages are still linked, which defeats the objective.
The only way I've found to divide the document up is to copy it whole and then delete pages before and after the required chapter breaks and then reassemble them into one document, which is pretty laborious.
I'm sure I'm missing something really basic here.
View 8 Replies
View Related
Apr 15, 2013
why the bounding box is so wrong when exporting paragraph text as EPS and placing it in InDesign or opening in Photoshop? See screenshots below. Text is being convert to curves in the EPS export dialog box.
At one point today, I was exporting an entire 8.5x11 page with a small block of paragraph text in the middle and it came into InDesign at 10x11".
Draw 16.3.0.1114, Ghostscript GPL 8.64
View 6 Replies
View Related
Mar 26, 2013
My boss has produced a layout that has images, artistic text and paragraph text and wants the whole thing half the size. Obviously the paragraph text doesn't just scale down when everything is grouped, do I just select the paragraph text and convert it to artistic text ?
View 13 Replies
View Related
Jul 29, 2011
I removed text from a rectangle and that message keep displaying in that rectangle.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
View 4 Replies
View Related
Apr 28, 2011
how to curve text within a shape, as paragraph text, not artistic text? (See my attached image.)
I have drawn the shape, inserted the text as paragraph text, but the text always wants to sit straight. I am so frustrated as I can find a workaround in either Corel or Adobe CS products. I have tried using artistic text in Corel, but have to do it line by line - and this brings other problems, such as I cant justify each line with each other, and sometimes a character jumps up relative to the other characters and the entire paragraph does not taper in...so this is not a solution, apart from the fact it will take me FOREVER to insert line by line....I would like to treat the text as a multiple line paragraph, and follow the shape.
View 14 Replies
View Related
Jul 14, 2011
I recently purchased Graphics Suite X5 and find I'm having difficulty in getting an accurate sizing to my text height. When I set the text height to be 3" and then start typing, the letter height comes back to me around 2 1/8". I did find another place to set the height but that is only after I finish my lettering. How to resolve this so I don't re-invent the wheel each time I set the lettering to my designs?
I am also having some difficulty with line spacing. I need line space in inches and the software seems to be set on a pt setting with no way to change it to inches.
CorelDraw Graphics Suite X5; Version 15.2.0.686
Mainframe is Lenovo ThinkCentre; M Series
Windows 7 64 bit/32bit
View 2 Replies
View Related
Mar 11, 2012
I used to click on the A in the toolbox and look up on the menu to change between paragraph text and artistic text but I can't find that icon or any icons to choose paragraph text. It eludes in customizing the tookbox too?
How do I get that paragraph text tool to show up in menus, bars and the toolbox?
View 2 Replies
View Related
Jan 5, 2013
I have some 20 pages file and used 2 font in it. Now when I look in Text - Text Statistics it is showing 6 different fonts other then I have used. I try to look in object manager it is showing paragraph text with only one font. How to find out the fonts that is not used by me.
View 1 Replies
View Related
Jun 4, 2012
In the last 2 days Corel has decided to start changing Artistic Text to Paragraph Text when I copy & paste it across documents, completely changing the font, size & colour of what I am copying.
I've just done a factory reset & it's still doing it.
I don't recall doing anything that would change a setting.
The text I am copy & pasting are disclaimers that are all set on 1 document & I copy & paste them to a proof as needed.
View 4 Replies
View Related
Mar 30, 2011
I can't see the text in several paragraph text boxes but they print fine. The outline is red on-screen but the contents aren't visable unless I print it.
Can I do something to the file, clean it, save as, reindex it, re-build it ?
View 6 Replies
View Related
Aug 10, 2011
I need to hide the dotted boxes that are now showing in X3 around all paragraph text on maybe 1000 business slides I created 5 to 10 years ago and now want to update.
Changing to artistic text does make the dotted boxes go away but is there a master setting that would make them go away in paragraph text?
Five to ten years ago I created maybe 1000 busness slides in CorelDraw and then moved their images to Powerpoint. Versions used were 11 and X3.
Now when I want to dust them all off and freshen them I find dotted boxes around .
View 4 Replies
View Related
Nov 18, 2013
With a number of of paragraph text objects selected, the interactive rotate becomes increasingly sluggish in keeping up with my mouse position when dragging round. I've got a calendar artwork with 12 paragraph objects, and after I've let go of the mouse button, the screen will continue trying to update for anything up to 10 seconds afterwards, during which time I can't do anything.
View 6 Replies
View Related
Oct 24, 2012
This is a problem that comes from previous versions. When applying a figure using Wrap resource to a Paragraph Text in columns: most of times the basis of the text is not aligned correctly.
View 2 Replies
View Related
May 22, 2011
I have some text in a paragraph frame that I want it to be in full justify but when I apply it the spaces between the words get messed up, some of them become too small and in some cases the words get so close to each other that you almost can't read the text. Also the words in the last line get also very close to each other and that ruins my design.
I have tried inceasing the kerning but this affects the space between the characters too and I don't want that. What I need is a way to correct manually the spacing between the words. I tried doing so by increasing the word spacing from the "Paragraph Formating" docker but for some reason it doesn't work at all.
View 12 Replies
View Related
Apr 5, 2013
In my one file I am unable to do copy and past command in paragraph text mode in one particular paragraph text handle. Can't find the reason. But in same file with new artistic or paragraph text handle I can do copy and past.
View 3 Replies
View Related
Jul 14, 2007
through some difficulty I'm having in getting the leading (ie, line spacing) I want with artistic text, in CorelDraw 12? I have three lines of text, the first line of which has a font size of 20 pt, and the second and third lines having a font size of 13 pt. The default leading is greater between the first and second lines than between the second and third -- probably due to the font size difference. I would like to make the leading equal for all lines, regardless of font size, but can't figure out how to do that. "Format Text - Spacing - Lines" seems to offer leading only in relation to character height -- which automatically makes the leading between the first and second line larger (due to the larger font size used in the first line) than it is between the subsequent lines.
View 5 Replies
View Related
Oct 26, 2011
I am looking into using CD X5 for my laser engraver, but I am running into a bit of a issue. I have to open PDFs into corel but when I do I lose all the spacing between each word. The font is not subsituted, there is no issue with opening it, and I can rip the file to the output device. I can edit the text by adding a space, I have double hit the space bar to make one space.
View 12 Replies
View Related
Jun 9, 2010
I have a document (booklet fold set-up) consisting of linked paragraph text and some objects (jpegs) spreaded through-out the booklet.
After selecting All Text, I have set the paragraph spacing at the Paragraph Formating Docker > Spacing > Paragraph & Line > After Paragraph to 70%. That very nicely decreased the whole document's space between paragraphs on all pages to the size I wanted. Problem is that the moment I move any object into that paragraph text and set it to Wrap Paragraph Text, then the space between the paragraphs simply jumps back to full size, even though it still shows 70% in the paragraph docker. (It happens only on that page, all others are still showing a 70% space between paragraphs.) And there's just no convincing it to go back. It's as if the presence of the object overrides this setting.
View 1 Replies
View Related
Jan 1, 2012
I'd like to enter a value to space two shapes but use the currently set worldscale. How can I do this?
I'll be using a architectural scale such as 3/8" = 1'-0" and such.
= Round(txtScaleDen.Value / 144)
Call setDocScaleCheckbox(chkUseDocScale.Value, userWorldScale)
I hate pressing F8 at startup!
View 2 Replies
View Related
Apr 11, 2012
How can I apply edited paragraph style to all at once.
I mean I have created new paragraph style with 10 pt Arial font and applied to different paragraph. And now I have edited the same paragraph style with 16 pt. Arial font, now how it will applied at once to all old style that I have used.
View 8 Replies
View Related
Jan 3, 2012
How do I remove the "paragraph" symbol or turn it off??????
It wasnt on when i first installed it last week and i must have turned it on by accident...and there is not a button that i can see to turn it off like in ms word.
View 11 Replies
View Related
Mar 20, 2012
Words in a paragraph are splitting into different lines when it gets to the end of a line. How do I stop words from splitting into different lines in a paragraph.
View 4 Replies
View Related
Oct 23, 2012
I have set Ariel as my default font for paragraph & artist text with 12 pt.. On making some change of text with font say to New Times Roman 18 pt. then the new artist text or paragraph text is 18 pt. as default font.
View 2 Replies
View Related
Dec 28, 2011
I, sometimes, get annoying additional, but small, paragraph spacing when using a tab at the beginning of a paragraph. Because this is not a constant problem, I thought I could find the cause, but it eludes me.
View 8 Replies
View Related
Mar 5, 2013
Look at the picture attached.
Why does this happen? Every time I open a file where I changed paragraph spacing it always gets back to its default value of x1,00.
View 6 Replies
View Related
Sep 4, 2013
I converted a DXF file to a Corel Designer file. This DXF file also has some dimensions which turned into paragraph text. This paragraph text is turned by 90 degrees. The font size is rather small, so I increased it by some points. As the paragraph text frames were now too small, I tried to increase their size. However, the text frames always jump back to their original size.
I experimented a little bit and noticed that this is only, if the text is turned by 90 or 270 degrees. If the text frame is not turned or turned by 180 degrees, you can change the size of the text frame. Additionally this problem arises only, if the option "Expand and shrink paragraph text frames to fit text" is activated (in Tools | Options | Workspace | Text). Sometimes some text frames were adapted automatically, when I changed this option. However, I do not know when which text frame was changed.
Corel Designer X6, service pack 1
View 2 Replies
View Related
May 22, 2012
I'd like to create sheet notes with different line spacing and paragraph spacing in ACA 2013. When I change before/after Paragraph spacing settings in the Text Formatting window, I get a message reading "please provide a value within range of 1/4" and 4". I'd like to use 1/8" for the paragrpah spacing, which is the same size as the text.
View 1 Replies
View Related
Mar 18, 2012
why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
View 7 Replies
View Related
Dec 1, 2010
We are having a big problem with dropping lines of text or parts of graphics. It is happening on 3 different laser systems and 2 different printers.
View 14 Replies
View Related
Sep 5, 2009
Often whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.
View 6 Replies
View Related
