How do I remove the "paragraph" symbol or turn it off??????
It wasnt on when i first installed it last week and i must have turned it on by accident...and there is not a button that i can see to turn it off like in ms word.
In my one file I am unable to do copy and past command in paragraph text mode in one particular paragraph text handle. Can't find the reason. But in same file with new artistic or paragraph text handle I can do copy and past.
View 3 Replies View RelatedI have a document of 300 pages or so of flowing text which I wish to edit into chapters.
Ideally I would like to select the start of a line of text and place it at the top of a page where it will then stay without breaking the paragraph links, as in Word (this also maintains the word count across the whole document).
Alternatively, could I simply break the paragraph links? When I attempt this now with Arrange/Break Paragraph Text, all that happens is
that a new page with an unlinked text frame appears, but the 'before' and 'after' pages are still linked, which defeats the objective.
The only way I've found to divide the document up is to copy it whole and then delete pages before and after the required chapter breaks and then reassemble them into one document, which is pretty laborious.
I'm sure I'm missing something really basic here.
I am doing a job with columns of donor names (originating from a Word file). Most of the lines space just fine but occasionally there is a 'phantom line' for want of a better term, sort of like I've gone from single spacing to 1.5 or so.
The thing is my paragraph text stats don't change... I highlight good lines - they show as 100%, I highlight the troublesome section, it shows as 100% and there is nothing in the Word file to show that this originated there.
As the job needs to get out the door, I'll just cut out the offending bits, make them artistic text and drop them back in to fit properly. WIth more than a thousand names this is getting pretty old pretty quick.
why the bounding box is so wrong when exporting paragraph text as EPS and placing it in InDesign or opening in Photoshop? See screenshots below. Text is being convert to curves in the EPS export dialog box.
At one point today, I was exporting an entire 8.5x11 page with a small block of paragraph text in the middle and it came into InDesign at 10x11".
Draw 16.3.0.1114, Ghostscript GPL 8.64
My boss has produced a layout that has images, artistic text and paragraph text and wants the whole thing half the size. Obviously the paragraph text doesn't just scale down when everything is grouped, do I just select the paragraph text and convert it to artistic text ?
View 13 Replies View RelatedI used to click on the A in the toolbox and look up on the menu to change between paragraph text and artistic text but I can't find that icon or any icons to choose paragraph text. It eludes in customizing the tookbox too?
How do I get that paragraph text tool to show up in menus, bars and the toolbox?
I have some 20 pages file and used 2 font in it. Now when I look in Text - Text Statistics it is showing 6 different fonts other then I have used. I try to look in object manager it is showing paragraph text with only one font. How to find out the fonts that is not used by me.
View 1 Replies View RelatedHow can I apply edited paragraph style to all at once.
I mean I have created new paragraph style with 10 pt Arial font and applied to different paragraph. And now I have edited the same paragraph style with 16 pt. Arial font, now how it will applied at once to all old style that I have used.
Words in a paragraph are splitting into different lines when it gets to the end of a line. How do I stop words from splitting into different lines in a paragraph.
View 4 Replies View RelatedI have set Ariel as my default font for paragraph & artist text with 12 pt.. On making some change of text with font say to New Times Roman 18 pt. then the new artist text or paragraph text is 18 pt. as default font.
View 2 Replies View RelatedI can't see the text in several paragraph text boxes but they print fine. The outline is red on-screen but the contents aren't visable unless I print it.
Can I do something to the file, clean it, save as, reindex it, re-build it ?
I need to hide the dotted boxes that are now showing in X3 around all paragraph text on maybe 1000 business slides I created 5 to 10 years ago and now want to update.
Changing to artistic text does make the dotted boxes go away but is there a master setting that would make them go away in paragraph text?
Five to ten years ago I created maybe 1000 busness slides in CorelDraw and then moved their images to Powerpoint. Versions used were 11 and X3.
Now when I want to dust them all off and freshen them I find dotted boxes around .
Being in the Heat Transfer business, there is a new paper out that rids the paper print called "Image Clip", it has a procedure that to make it work. Printing a mirrored image on transfer paper and printing another image with laser but a "NEGATIVE". I have suite X4, any quick ways to make the image using my Corel, their instructions is only in Photoshop, I prefer Corel?
View 6 Replies View RelatedI use to use Coreldraw X3 when I open the files in X5 the colors have turned to green(on vista) just got Windows 7 (64-bit)and when I open files from X3 and X5 the colors have all turned to white now.
View 3 Replies View RelatedWith a number of of paragraph text objects selected, the interactive rotate becomes increasingly sluggish in keeping up with my mouse position when dragging round. I've got a calendar artwork with 12 paragraph objects, and after I've let go of the mouse button, the screen will continue trying to update for anything up to 10 seconds afterwards, during which time I can't do anything.
View 6 Replies View RelatedThis is a problem that comes from previous versions. When applying a figure using Wrap resource to a Paragraph Text in columns: most of times the basis of the text is not aligned correctly.
View 2 Replies View RelatedWhen you use the line connector, it's supposed to turn two objects into one. This would be great and speed things up rather than combining objects and then drawing lines etc between.
BUT, when you use the tool, the objects are kept separated, and a connector object shows up. It would be great if the 2 objects actually became ONE like the mouse-over description says will happen.
One good reason for the change is that the line that's made can't be changed via the node tool... so you can't make it a curve or add cusps at the end etc.
I have created a symbol in CorelDraw X5 on a Mac using parallels.
The symbol is on a layer which is not locked, and the object which has become a symbol was grouped before I made it into a symbol. The boundary marks changed from black to blue.When I try to select Edit/Symbol/Break link, the Break link command is greyed out.
corel problem.jpg
My symbol manager doesn't work in CorelDRAW X5.
I open the symbol manager and click on local or network symbols, add library and go to c: users/public/ public documents/ Corel/ CorelDRAW Graphics Suite X5/ extras/ content/ clipart and click on any of the folders or files and then click on "ok" and I get absolutely nothing.
Nothing appears in the symbol preview at anytime. I think I am doing this according to the instructions. I know the clip art is there because I can navigate to it through windows and open them.
I uninstalled, re-installed, and updated it.
if you can type the alpha symbol for angle in Coreldraw.
View 2 Replies View RelatedWhat is the paperclip symbol that shows in the color fill? When I use my own fill it's solid byut sometimes when I import someone elses file it has that paperclip thingy?
View 2 Replies View RelatedI removed text from a rectangle and that message keep displaying in that rectangle.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
how to curve text within a shape, as paragraph text, not artistic text? (See my attached image.)
I have drawn the shape, inserted the text as paragraph text, but the text always wants to sit straight. I am so frustrated as I can find a workaround in either Corel or Adobe CS products. I have tried using artistic text in Corel, but have to do it line by line - and this brings other problems, such as I cant justify each line with each other, and sometimes a character jumps up relative to the other characters and the entire paragraph does not taper in...so this is not a solution, apart from the fact it will take me FOREVER to insert line by line....I would like to treat the text as a multiple line paragraph, and follow the shape.
In the last 2 days Corel has decided to start changing Artistic Text to Paragraph Text when I copy & paste it across documents, completely changing the font, size & colour of what I am copying.
I've just done a factory reset & it's still doing it.
I don't recall doing anything that would change a setting.
The text I am copy & pasting are disclaimers that are all set on 1 document & I copy & paste them to a proof as needed.
what the resolution is on the screen in Pixels mode? Where Corel finds the value of resolution?
View 11 Replies View RelatedEvery time I type text into a box (wrap) it's invisible - maybe white (but background is white, so it look invisible). How to set the color by default. Back to black.
View 6 Replies View RelatedI just got X6. I can't get my default color mode to save. I go to options, document,general and change it from CMYK to RGB click document to save styles for all but it doesn't save it. When I export I have to manually change CMYK to RGB and the resolution every time. In other versions once I set it it was always there. Am I missing a setting somewhere?
View 2 Replies View RelatedThe problem is when i import a pdf file in coreldraw.
Mode cymk change all colors in RGB and i don't want this. How is possible?I need import pdf file cymk in the same mode. The pdf file is vector and cymk like source.
When making a print preview the drawing is looking like it should.But when printing the file on our printers (we have tested it on 2) it comes out with no background.When we change the color mode to CYMK there is no problem printing.How can we resolve this issue so that we can print in RGB color mode without having to swap to CYMK?
View 2 Replies View RelatedA colleague of mine has problems when moving a textbox.She grab the textbox with the mouse, the complete work area change to a white background, so she doesn't see, where she has to drop the mouse cursor. After she drop the mouse cursor, the background change to the graphic again.
The hardware she uses is new and included the following components:HP Z200 i7-870 Workstation2,93 GHz, 6 GB 1333MHz DDR3, ATI FirePro V3800 with 512MB RAM, Windows7 Prof 64bit
