CorelDRAW Graphics Suite 12 :: Unable To Open Photopaint
Jul 6, 2013
I am a long time user of Corel products (well, since Corel 4). I have been running Corel 12 for several years, as financially, as a pensioner it is not viable to keep up grading and 12 has been perfectly adequate. I am on Windows 7 Home premium, and I know that 12 was not designed for that platform, however it has been operation satisfactorily since 7 came out. Today, It has crashed, and I am unable to open photopaint at all either from the shortcut or the program list.
(Corel Draw, which is the only other part of the suite I use) appears to open and be available. I tried to repair with the original disk to no avail, so that having failed I did an uninstall, cleared the caches the temporary files and did a clean install. Corel Draw is still working, but Paint will not open at all. The logo appears then totally disappears after a few seconds leaving the desktop clear. There has been no changes to the computer recently and until last night the program was working fine.
View 2 Replies
ADVERTISEMENT
May 4, 2011
I've been using these two programs for some time with no problem. I recently upgraded some of my adobe software and now when I try to open CorelDRAW of Photopaint, there is no welcome screen anymore and I can't click on anything.
Is there something conflicting with the welcome screen (flash or something that the welcome screen uses) that perhaps was installed with one of the adobe products, maybe? Not sure if it matters but I updated adobe dreamweaver and fireworks.Both programs are unusable now with this loading problem.
View 14 Replies
View Related
Apr 17, 2013
My tool box specifically- the bar which lists commands like print or save--- is suddenly gone--- don't know how to get it back with no commands to call it up
View 3 Replies
View Related
Jul 31, 2012
When I open PhotoPaint X5, which is part of my CroelDRAW X5 Suite, I receive an error message; "PhotoPaint has stopped working". CorelDraw X5 opens correctly without any problem.
I have un-installed and re-installed the CDX5 Suite, but the problem still persists.
Below is the 'Problem Signature', which means nothing to me!
The Problem Signature:
Problem Event Name:APPCRASH
Application Name:CorelPP.exe
Application Version:15.2.0.686
Application Timestamp:4d9be3e1
Fault Module Name:corelpp.dll
Fault Module Version:15.2.0.686
Fault Module Timestamp:4dc064a2
Exception c0000005
Exception Offset:0018a840
OS Version:6.1.7601.2.1.0.256.48
Locale ID:2057
View 13 Replies
View Related
Jun 23, 2011
Working in photopaint . . . all goes well until I try to save or close the file. Then it stops responding. When I try to close CorelDraw, it says that I cannot close it while I have the photo open in Photopaint. However, Photopaint is no longer running. This is new problem since I installed Patch 3.
View 2 Replies
View Related
May 18, 2012
When selecting "File - Acquire Image" in Corel PhotoPaint X6 it does not see my scanner, yet when I open Corel PhotoPaint X5 the scanner is there and I can scan directly from there.
The scanner also works fine in Adobe Acrobat and other software installed on my computer. Only Corel PhotoPaint X6 is not working
View 4 Replies
View Related
Jan 1, 2013
PhotoPAINT doesn't cycle through the images of an animation right after creating a new one.
Here are the steps to reproduce:
Create a new image and select, say, 5 frames for the image. Add some imagery to each of the frames (and don't forget to flatten the object hierarchy as PhotoPAINT doesn't deal with graphic objects for animated images.) Open the Film tool window and hit the [Play] button. Result: The image does not get animated.
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
View 4 Replies
View Related
Apr 16, 2009
I have had CorelDraw & Photopaint X4 installed for several months and just started having this problem.
CorelDraw: Every time I use the Fill Color option, whether by double-clicking the bucket icon at the bottom OR using the option in the toolbar, the program freezes and never recovers. When I use the color palette to fill a shape, I do not encounter the problem.
PhotoPaint: Every time I use the Image ->Paper Size option, the program freezes and never recovers.
I have reinstalled the program and the problem persists.
These are options I use often, and if I don't find the solution I will have to find an alternative to Corel.
View 5 Replies
View Related
Feb 6, 2013
In Corel draw, I click file, open, and the location is not the folder I want. I have created shortcuts. How to change this.
View 3 Replies
View Related
Mar 24, 2012
Corel X4, still installed on my PC, has no problem at all.But Corel X6 (CorelDRAW as well as CorelPHOTOPAINT) crashes after the preview scan with Epson Scan (EPSON Perfection V330 Photo) in professional mode. When I use the simple mode (which does all automatically: preview scan, border recognition, best guess about resolution and color mode and the final scan) there also is no problem.
But I wonder what the TWAIN driver does with Corel X6 after having finished the preview scan ..I already tried to uninstall and reinstall the (latest) driver suite from EPSON without success.
View 1 Replies
View Related
Jan 18, 2013
After using Camera Raw Lab for .NEF files, photopaint seems to be incapable of exporting the file to a jpg file without extra fiddling.
I can export after I convert the file to RGB mode, but I want to understand why I cannot export as a jpg without doing that...?
View 11 Replies
View Related
Mar 4, 2012
Is it possible that I can open a bitmap present in a coreldraw file in photoshop, edit it there and it gets back to its original position. that is the thing for which corel photo paint gets opened, i can set Adobe Photoshop for editing images?
View 14 Replies
View Related
Dec 20, 2011
I seem to have lost the functionallity of double-clicking on an image placed in CDR X5 to automatically edit in Photopaint. The checkbox in tools/options/edit is checked and photopaint can certainly be opened in the Application Launcher but double-click does nothing.
View 5 Replies
View Related
Oct 11, 2011
how to export the text as an editable to photoshop or to photopaint as exactly as in the coreldraw ? It should be editable after exporting them
View 1 Replies
View Related
Sep 21, 2013
I have one logo designed in Corel draw X5 and sent the file to the printer company ,they have corel draw12 on their PC and they are not able to open the design as it come as a blank page in corel draw12 .. how to open the same in corel draw 12..
View 3 Replies
View Related
Apr 2, 2012
Having trouble opening an svg file in X6. Crashes both X5 and X6.
File available here : [URL] ....
View 2 Replies
View Related
Jul 13, 2010
I'm unable to open/import .ai files into corel x4. Getting "corrupted file" error.
View 5 Replies
View Related
Mar 21, 2013
Any project I save cannot be opened later. When I try to open .cdr or template file I get the message ''CorelDRAW X6 (64-Bit) has stopped working. A problem...etc...please close the program''
I noticed that this first happened in projects that had text on them but now I can't open any .cdr file.
My system specs:
Intel Core i7 2600 3,40 GHz
RAM 16GB DD3
ATI Sapphire 6870 1G VRAM
SSD OCZ 120GB Sata III
Windows 7 Ultimate 64 bit.
View 12 Replies
View Related
Oct 18, 2011
this is a problem that arose after repairing the previous issue, downloading the MSXML4 SP3 pack...now I can't use some fonts I purchased, open face fonts. After redownloading from supplier, issue is still not resolved.Also, I am unable to open disc 3 of Corel X3 to add fonts.
View 1 Replies
View Related
May 10, 2012
I have recently upgraded to X6 from X3. After design work I would export the file to jpeg for client approval. I used Apple Mail 5.2 to attach the jpeg file but my problem is the client cannot open the file. It just turns out blank with a little cross. I cannot figure out what is the problem during the export process. I have no problem at all with X3.
View 9 Replies
View Related
Oct 29, 2012
When I try to open about 90% of my files, I can't. I get an error with a yellow caution triangle with an exclamation point. it says "Error Reading C:UsersSignsPlusDesktop.......
So I end up dragging everything to a new page. That works fine but it's a pain ending up with multiples of everything.
View 13 Replies
View Related
Jun 13, 2011
When I checked my computer for any any unused programs I got see this coreldraw (r) graphics suite x5 installed. When I got to uninstall it showed and error message that some sort of setup.xml is missing. When I checked this programs folder I got to see that there are two corel folders [Corel and Corel (2) ] in my C: drive. After checking all the file locations of different corel applications I deleted the Corel (2) foder. After that also corel was not being uninstalled. I don't want to re-format my computer only for this
View 1 Replies
View Related
Aug 27, 2011
I have CorelDRAW X4, when I open some file(s), which takes long time to open, even which file size is smaller or bigger.
View 1 Replies
View Related
May 1, 2012
When designing brochures in X5, we quite often will save a file with no issues, but when we go to re-open it we end up with "encountered an improper arument" error message and the file is no longer able to be opened.
If you try to open the backup it comes up with a "runtime error" and won't open either. We are running Windows 7
View 3 Replies
View Related
Jan 25, 2013
About a month and a half ago, after a microsoft update, I cannot open .cdr files from the file/open list. When going to file/open, the programs hangs up, cannot even use "cancel", and have to go to Windows Task Manager to shut down the program. All is well until I try to open a file from file/open.
I can import .eps, and everything else seems fine.My work around is to open from My Documents --Which works fine. Just is a silly little aggravation.
I have uninstalled, reinstalled, repaired, etc....all the normal fixes.
View 6 Replies
View Related
Apr 12, 2011
I have followed the instructions carefully and am unable to fill anything.
I make a rectangle. Choose the colour from the palette, drag the little coloured box over to the rectangle and release. Nothing. Many years ago I used my brothers Corel draw, so I know ( or knew then ) how to colour a rectangle.
View 4 Replies
View Related
Apr 15, 2013
I'm not able to assign a Hotkey to enable me to use Corel Capture. No matter what I use, it tells me that the Hotkey is already being used by this system. I have deleted Hotkeys and then then tried to reassign them to no avail.
View 14 Replies
View Related
Mar 18, 2011
When I export from Corel Draw as a jpg, then put the image online, on IE it shows as a red x.
View 5 Replies
View Related
Mar 25, 2013
Using CorelDraw X6 on Windows 8 x64, and a Kensington Expert Mouse (that's a type of trackball).
For some reason, I can't use the wheel to zoom in or out. Just doesn't work. The drivers are installed, and the wheel works fine in all other applications, but absolutely refuses to cooperate in CorelDraw X6.2 (had this issue since CorelDraw 6).
View 11 Replies
View Related
Jun 23, 2011
I have Corel Draw 12 on one computer and Corel 5 on my lap top - After following the simple video instructions to place a background image ( imported photo - jpg or tiff) into a set text the message box ...The object you selected is invalid - do you wish to try again pops up.
View 1 Replies
View Related
Apr 4, 2013
I am using Windows Vista 32 bit OS.
I have used the X6 graphics suite for some time now and have always installed updates when notified. A couple of days ago I was notified of the latest update which I duly installed.
Thereafter I was unable to open Coreldraw. I was unable to resolve the issue by reverting to a previous versions from as few days previous. I have done this by using the usual windows uninstall facility.
However, when I try to reinstall the X6 suite from the CD I get an error message that says "A newer version of this program is installed. Delete this first before you install this version" (or words to that effect).
Clearly there is something that indicates a later version is installed but I cant find out why I am getting this message. I have endeavoured to delete everything I find associated with X6 but after rebooting I still can't reinstall the software.
View 3 Replies
View Related
