When I try to open about 90% of my files, I can't. I get an error with a yellow caution triangle with an exclamation point. it says "Error Reading C:UsersSignsPlusDesktop.......
So I end up dragging everything to a new page. That works fine but it's a pain ending up with multiples of everything.
After recently installing Corel Draw 12 we discivered we could not open our existing .cdr files. It would make sense if we were trying to open V:12 files with an V:5 but it seems like V:12 should support V;5 .cdr files.
View 9 Replies View RelatedI cannot open existing website .html files in Website Creator - how to open them?
View 2 Replies View RelatedHaving trouble opening an svg file in X6. Crashes both X5 and X6.
File available here : [URL] ....
I'm unable to open/import .ai files into corel x4. Getting "corrupted file" error.
View 5 Replies View RelatedUsing X5 suite. Just installed Windows 7 on my stand alone system. Now when I make a change to a file and attempt to resave (Save) it, the message box says the file is "Read Only" and asks me to save under another name.
View 5 Replies View RelatedNew laptop. Windows 7 64 bit. Corel #3.
When I open up existing Corel files the fonts are missing. The fonts are there in other applications, just not in t Corel. We have other machines with Windows 7 and X3 and they work fine.
In Corel draw, I click file, open, and the location is not the folder I want. I have created shortcuts. How to change this.
View 3 Replies View RelatedI am a long time user of Corel products (well, since Corel 4). I have been running Corel 12 for several years, as financially, as a pensioner it is not viable to keep up grading and 12 has been perfectly adequate. I am on Windows 7 Home premium, and I know that 12 was not designed for that platform, however it has been operation satisfactorily since 7 came out. Today, It has crashed, and I am unable to open photopaint at all either from the shortcut or the program list.
(Corel Draw, which is the only other part of the suite I use) appears to open and be available. I tried to repair with the original disk to no avail, so that having failed I did an uninstall, cleared the caches the temporary files and did a clean install. Corel Draw is still working, but Paint will not open at all. The logo appears then totally disappears after a few seconds leaving the desktop clear. There has been no changes to the computer recently and until last night the program was working fine.
I have one logo designed in Corel draw X5 and sent the file to the printer company ,they have corel draw12 on their PC and they are not able to open the design as it come as a blank page in corel draw12 .. how to open the same in corel draw 12..
View 3 Replies View RelatedAny project I save cannot be opened later. When I try to open .cdr or template file I get the message ''CorelDRAW X6 (64-Bit) has stopped working. A problem...etc...please close the program''
I noticed that this first happened in projects that had text on them but now I can't open any .cdr file.
My system specs:
Intel Core i7 2600 3,40 GHz
RAM 16GB DD3
ATI Sapphire 6870 1G VRAM
SSD OCZ 120GB Sata III
Windows 7 Ultimate 64 bit.
this is a problem that arose after repairing the previous issue, downloading the MSXML4 SP3 pack...now I can't use some fonts I purchased, open face fonts. After redownloading from supplier, issue is still not resolved.Also, I am unable to open disc 3 of Corel X3 to add fonts.
View 1 Replies View RelatedI have recently upgraded to X6 from X3. After design work I would export the file to jpeg for client approval. I used Apple Mail 5.2 to attach the jpeg file but my problem is the client cannot open the file. It just turns out blank with a little cross. I cannot figure out what is the problem during the export process. I have no problem at all with X3.
View 9 Replies View RelatedI have CorelDRAW X4, when I open some file(s), which takes long time to open, even which file size is smaller or bigger.
View 1 Replies View RelatedAbout a month and a half ago, after a microsoft update, I cannot open .cdr files from the file/open list. When going to file/open, the programs hangs up, cannot even use "cancel", and have to go to Windows Task Manager to shut down the program. All is well until I try to open a file from file/open.
I can import .eps, and everything else seems fine.My work around is to open from My Documents --Which works fine. Just is a silly little aggravation.
I have uninstalled, reinstalled, repaired, etc....all the normal fixes.
I am trying to import a pdf file ford connect van template into CorelDraw x5 but am having no joy.
View 2 Replies View RelatedAfter successfully using Corel Draw for some years, I am suddenly unable to print files. Instead of the file, my printers just print a black page. I have tried re-installing but it has not worked.
View 1 Replies View RelatedI just installed Corel 13 to my new computer, but it isn't recognizing the text in any of the files from my previous computer. Granted, the files on my previous computer were in an older version of Corel, but that shouldn't be an issue. I can add text to a new document, but even when importing a pdf, the text in the file disappears.
If you drag to select the area where the text should be, it recognizes that something is there. However, you can't see anything or do anything with it. I ran the repair on the installation CD, but I am still having the same problem.
I have looked at the galleries and saw some excellent pictures. Since then I no longer can open any file . I uninstalled Coreldraw 15 and even went to repair mode, still no luck. (I reinstalled and removed many times).
I reinstalled Coreldraw 14 and any file I work on and save and close I cannot open the file.
It seems I have picked up a virus from the pictures I uploaded from Corel gallery.
Half a year ago I started on a project with a CD-cover that wasn't finished. Now when I want to open them, It's impossible. If I click on the files X4 opens and immediately crashes. On all CDR files. Same thing with X5. but I can open a CDR file in the folder next to this. Even the backup files seem to be corrupt. The CPT-files do however open fine.
If I start the program first and then open or import a CDR file, the progress bar halts at about 50 % and then nothing much happens.
Any chance of recovering the files, or do I have to rebuild everything?
I know one strange thing happened when I created the first file. I saved the Digipak format as a new page format and then that format stuck as default page size. I tried many times to reset it to A4, but I didn't succeed with that until I reset the workspace.
I checked the CDR files in ZIP format. In the XML file I coud see that the industry was identified as "music". How could that happen?
I just replaced the hard drive in my laptop. I have installed Coreldraw 12 again and it opens and works fine.
Problem is when I create and save a file. The file appears on the desktop ( if that is where I save it ) but it has an odd icon with a red A on the bottom corner. If I click on it, I get a "not a valid win32 application" message.
However if I open Corel12 and import the file, it appears to be fine.
I have been having problems opening old corel drw 11 jobs that i did.
Once i finish designing and close the files, it will not open the following day.
also some times i get an error message that the application you are using has become unstable and will need to close, and i always lose any ongoing projects.
I tried to open file's that I created recently in X3 and they will not open. when i try to open them they appears as blank page and they show nothing
all of my Cdr files be corrupted . they show their real size (eg 23mb ) but when i open them it show white page. Even the tumbnail pic shows only corel draw pencil and when i want open them on corel or import in it This error message appears : D: 01.cdr" is not importable using the selected filter, or this format is not supported
discovered a program crash while opening a Corel v.8 file created with Corel X5. Any other version of exported files works probably, only if exported compatible to v.8 reopening with Corel X5 causes a program crash.
View 2 Replies View RelatedEvery time when i open a .cdr, coreldraw open the file in same file that i have been open before.
How i can make coreldraw to open files into new files not into opened ones ?
i hav a problem with x6 version
when iam open x5 files in x6 the Fonts are Disturbed, & change the places
how do i open pdf special edition files in Corel X4? i can view it as a pdf but I can't get it into corel to see it's dimensions or anything.
ps. haven't been here for quite a while. guess it's a good thing I haven't had a bunch of questions as usual
I have recently installed Corel X6 and have found it to be painfully slow when opening files. At first I had thought it might be a network issue so I copied the file to a local drive and experienced the same problem.
The file is only 819Kb but it takes about 3 minutes to open the file. When I first select the file in the File Open dialogue window Corel just hangs for about 1 minute. It finally responds then takes a further 2 minutes to process and open the file.
I have turned off my antivirus software as I thought this might be a file scanning issue but still the same result.
I use CorelDRAW on a daily basis and recently the program takes a lot of time to open/close/save my files, or sometimes it'll simply freeze.
View 6 Replies View RelatedI'm using Windows 7. The previews were working now they just don't work, "preview not available". I see no check box in window 7 to turn that on or off, unlike in windows xp. I have tried turning on large thumbnails in windows explorer when opening files, older files will show up but most recent files just show the Corel Draw icon large.
Could this be some kind of auto update from Windows? Since I have no destination, I'm never lost.
Every time I open a new file a new Corel Draw application opens. Is there a setting I can change to have the files open in the same application?
View 1 Replies View Related