CorelDRAW Graphics Suite X3 :: Unable To Recognize Text From Files
Aug 31, 2012
I just installed Corel 13 to my new computer, but it isn't recognizing the text in any of the files from my previous computer. Granted, the files on my previous computer were in an older version of Corel, but that shouldn't be an issue. I can add text to a new document, but even when importing a pdf, the text in the file disappears.
If you drag to select the area where the text should be, it recognizes that something is there. However, you can't see anything or do anything with it. I ran the repair on the installation CD, but I am still having the same problem.
After successfully using Corel Draw for some years, I am suddenly unable to print files. Instead of the file, my printers just print a black page. I have tried re-installing but it has not worked.
I have a list - want to apply bullets, but cannot.
I've tried changing fonts, but bullets are greyed out in the paragraph section of text properties box for every font I choose. I've selected many fonts ... still ... no bullets.
When I try to open about 90% of my files, I can't. I get an error with a yellow caution triangle with an exclamation point. it says "Error Reading C:UsersSignsPlusDesktop.......
So I end up dragging everything to a new page. That works fine but it's a pain ending up with multiples of everything.
why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
In my one file I am unable to do copy and past command in paragraph text mode in one particular paragraph text handle. Can't find the reason. But in same file with new artistic or paragraph text handle I can do copy and past.
When I checked my computer for any any unused programs I got see this coreldraw (r) graphics suite x5 installed. When I got to uninstall it showed and error message that some sort of setup.xml is missing. When I checked this programs folder I got to see that there are two corel folders [Corel and Corel (2) ] in my C: drive. After checking all the file locations of different corel applications I deleted the Corel (2) foder. After that also corel was not being uninstalled. I don't want to re-format my computer only for this
I have followed the instructions carefully and am unable to fill anything.
I make a rectangle. Choose the colour from the palette, drag the little coloured box over to the rectangle and release. Nothing. Many years ago I used my brothers Corel draw, so I know ( or knew then ) how to colour a rectangle.
I'm not able to assign a Hotkey to enable me to use Corel Capture. No matter what I use, it tells me that the Hotkey is already being used by this system. I have deleted Hotkeys and then then tried to reassign them to no avail.
Using CorelDraw X6 on Windows 8 x64, and a Kensington Expert Mouse (that's a type of trackball).
For some reason, I can't use the wheel to zoom in or out. Just doesn't work. The drivers are installed, and the wheel works fine in all other applications, but absolutely refuses to cooperate in CorelDraw X6.2 (had this issue since CorelDraw 6).
I have Corel Draw 12 on one computer and Corel 5 on my lap top - After following the simple video instructions to place a background image ( imported photo - jpg or tiff) into a set text the message box ...The object you selected is invalid - do you wish to try again pops up.
I am a long time user of Corel products (well, since Corel 4). I have been running Corel 12 for several years, as financially, as a pensioner it is not viable to keep up grading and 12 has been perfectly adequate. I am on Windows 7 Home premium, and I know that 12 was not designed for that platform, however it has been operation satisfactorily since 7 came out. Today, It has crashed, and I am unable to open photopaint at all either from the shortcut or the program list.
(Corel Draw, which is the only other part of the suite I use) appears to open and be available. I tried to repair with the original disk to no avail, so that having failed I did an uninstall, cleared the caches the temporary files and did a clean install. Corel Draw is still working, but Paint will not open at all. The logo appears then totally disappears after a few seconds leaving the desktop clear. There has been no changes to the computer recently and until last night the program was working fine.
I have used the X6 graphics suite for some time now and have always installed updates when notified. A couple of days ago I was notified of the latest update which I duly installed.
Thereafter I was unable to open Coreldraw. I was unable to resolve the issue by reverting to a previous versions from as few days previous. I have done this by using the usual windows uninstall facility.
However, when I try to reinstall the X6 suite from the CD I get an error message that says "A newer version of this program is installed. Delete this first before you install this version" (or words to that effect).
Clearly there is something that indicates a later version is installed but I cant find out why I am getting this message. I have endeavoured to delete everything I find associated with X6 but after rebooting I still can't reinstall the software.
When I am printing my design, the black is not printing. Have tried on two printers, neither are faulty. Wondered if I accidentally have it on a setting that doesn't allow it to print black.
I have one logo designed in Corel draw X5 and sent the file to the printer company ,they have corel draw12 on their PC and they are not able to open the design as it come as a blank page in corel draw12 .. how to open the same in corel draw 12..
I have a problem with printing in X5. All the documents I've worked in X4when I print the X5 have a problem with the colors, they are not the same with X4.
Whenever i save a file, and then try to open it later on, it wont open. Nothing happens (just like I haven't clicked anything). It does this is I double click the file or I do File >Open. However if i save the file as 'Version 13' it opens fine. I decided to re-install Corel Draw (a number of times), but the problem is still there!
I am not a power user but have used CorelDraw since ver 8. My question is why I cannot fill shapes like the one provided whether I create them in Draw, or import them as dwg or dxf into Draw. It's interesting that I can fill this shape in DesignCad (the source of the dwg-dxf files) but not in Corel. Of course, the project I'm working on needs the other touches that Draw provides and DesignCad doesn't.
I'm having trouble making fonts using X4. I've found the export "ttf" filter, and the dialog opens for my first letter, which allows me to assign the ASCII position, and that works out fine. A TTF file is created, with that letter shown. However, when I try to export the next object for the next letter, instead of simply opening the assigning dialog for the next object, so as to add to the file, it goes to the dialog asking me to name the file, and when I do, Corel crashes.
While using print merge option Corel Draw X5 give me an error when I try to import an existing csv or txt file on the print merge dialog box. It says "Impossible to open the file or not correct file format". The files are made with open office or microsoft works, and in the past I've already used and worked good. Now I find this error...
Please find the attached "Error Message.jpg" file.I am getting that Error Message while trying to Uninstall "CorelDRAW Graphics Suite X6" on a Windows XP Desktop Computer. This Computer belongs to other person. I am getting the same Error Message upon trying to Re-Install CorelDRAW Graphics Suite X6.How do I successfully Uninstall and Re-Install?
I'm trying to graduate a circle precisely . An example such as a draftsman's compass or a clock face. I create a circle then I make a vertical line which then I copy , space them apart and create a blend between them. I then choose (new path) and select the circle, then (blend along full path) and finally (rotate all objects).
At a quick glance it looks proper but as in the case of a clock face (a graduation every 30 degrees) some of the lines are not precisely radiating from the center of the circle I'm using as the path. In the near future I plan on drawing" to scale' a certain number of meshing gears and this will cause problems.
issue with selecting and then moving an object in Photo Paint? I can hover and get the object name, and then select but when I go to move the object PPT selects and moves an entirely different object. I have held down Ctrl, Alt etc. to no avail. Bigger objects are easier since there is more to grab on to but smaller objects are a pain.
I'm trying to set my default font size, Helvetica (Type 1) to 12 point. It keeps reverting back to 24 point.
I have to use Type 1 Helvetica and not that new "Helvetica Neuel T 55 Roman" because of standards for a magazine I work on. I though Open Type Helvetica (the real Helvetica) was included with CorelDRAW X6.
