CorelDRAW Graphics Suite X5 :: Cannot Open Files With (open) Command

Jan 25, 2013

About a month and a half ago, after a microsoft update, I cannot open .cdr files from the file/open list.  When going to file/open, the programs hangs up, cannot even use "cancel", and have to go to Windows Task Manager to shut down the program.  All is well until I try to open a file from file/open. 

I can import .eps, and everything else seems fine.My work around is to open from My Documents --Which works fine.  Just is a silly little aggravation.

I have uninstalled, reinstalled, repaired, etc....all the normal fixes.

View 6 Replies


ADVERTISEMENT

CorelDRAW Graphics Suite X4 :: When Open Some Files Which Takes Long Time To Open?

Aug 27, 2011

I have CorelDRAW X4, when I open some file(s), which takes long time to open, even which file size is smaller or bigger.

View 1 Replies View Related

CorelDRAW Graphics Suite X5 :: Cannot Open Files

Jun 16, 2013

I have looked at the galleries and saw some excellent pictures. Since then I no longer can open any file . I uninstalled Coreldraw 15 and even went to repair mode, still no luck. (I reinstalled and removed many times).

 I reinstalled Coreldraw 14 and any file I work on and save and close I cannot open the file. 

It seems I have picked up a virus from the pictures I uploaded from Corel gallery.

View 5 Replies View Related

CorelDRAW Graphics Suite X4 :: Recover CDR Files That Won't Open?

Mar 10, 2010

Half a year ago I started on a project with a CD-cover that wasn't finished. Now when I want to open them, It's impossible. If I click on the files X4 opens and immediately crashes. On all CDR files. Same thing with X5. but I can open a CDR file in the folder next to this. Even the backup files seem to be corrupt. The CPT-files do however open fine.

If I start the program first and then open or import a CDR file, the progress bar halts at about 50 % and then nothing much happens.

Any chance of recovering the files, or do I have to rebuild everything?

I know one strange thing happened when I created the first file. I saved the Digipak format as a new page format and then that format stuck as default page size. I tried many times to reset it to A4, but I didn't succeed with that until I reset the workspace.

I checked the CDR files in ZIP format. In the XML file I coud see that the industry was identified as "music". How could that happen?

View 15 Replies View Related

CorelDRAW Graphics Suite 12 :: Can't Save And Open CDR Files

Dec 19, 2011

I just replaced the hard drive in my laptop. I have installed Coreldraw 12 again and it opens and works fine.

Problem is when I create and save a file. The file appears on the desktop ( if that is where I save it ) but it has an odd icon with a red A on the bottom corner. If I click on it, I get a "not a valid win32 application" message.

However if I open Corel12 and import the file, it appears to be fine.

View 5 Replies View Related

CorelDRAW Graphics Suite 11 :: Files On Desktop Won't Open

Dec 8, 2011

I have been having problems opening old corel drw 11 jobs that i did.

Once i finish designing and close the files, it will not open the following day.

also some times i get an error message that the application you are using has become unstable and will need to close, and i always lose any ongoing projects.

View 1 Replies View Related

CorelDRAW Graphics Suite X3 :: Can't Open CDR Files - Appear As Blank

Jun 9, 2011

I tried to open  file's that I created recently in X3 and they will not open. when i try to open them they appears as blank page and they show nothing

all of my Cdr files be corrupted . they show their real size (eg 23mb ) but when i open them it show white page. Even the tumbnail pic shows only corel draw pencil and when i want open them on corel or import in it This error message appears :   D: 01.cdr" is not importable using the selected filter, or this format is not supported

View 5 Replies View Related

CorelDRAW Graphics Suite X6 :: SVG Files Unable To Open

Apr 2, 2012

Having trouble opening an svg file in X6. Crashes both X5 and X6.

File available here : [URL] ....

View 2 Replies View Related

CorelDRAW Graphics Suite X5 :: Crash While Open V8 Files?

Dec 13, 2011

discovered a program crash while opening a Corel v.8 file created with Corel X5. Any other version of exported files works probably, only if exported compatible to v.8 reopening with Corel X5 causes a program crash.

View 2 Replies View Related

CorelDRAW Graphics Suite X4 :: Unable To Open / Import AI Files

Jul 13, 2010

I'm unable to open/import .ai files into corel x4. Getting "corrupted file" error.

View 5 Replies View Related

CorelDRAW Graphics Suite 11 :: New File Opened Into Other Files Open Before

Feb 24, 2011

Every time when i open a .cdr, coreldraw open the file in same file that i have been open before.

How i can make coreldraw to open files into new files not into opened ones ?

View 9 Replies View Related

CorelDRAW Graphics Suite X6 :: Fonts Disturb When Open X5 Files?

Jun 30, 2013

i hav a problem with x6 version

 when iam open x5 files in x6 the Fonts are Disturbed, & change the places

View 3 Replies View Related

CorelDRAW Graphics Suite X4 :: How To Open PDF Special Edition Files

Aug 29, 2012

how do i open pdf special edition files in Corel X4? i can view it as a pdf but I can't get it into corel to see it's dimensions or anything.  

ps. haven't been here for quite a while.  guess it's a good thing I haven't had a bunch of questions as usual

View 2 Replies View Related

CorelDRAW Graphics Suite X5 :: Open Backup It Comes Up With Runtime Error And Won't Open?

May 1, 2012

When designing brochures in X5, we quite often will save a file with no issues, but when we go to re-open it we end up with "encountered an improper arument" error message and the file is no longer able to be opened.

If you try to open the backup it comes up with a "runtime error" and won't open either. We are running Windows 7

View 3 Replies View Related

CorelDRAW Graphics Suite X4 :: Unable To Open Desired Folder By Clicking Open File

Feb 6, 2013

In Corel draw, I click file, open, and the location is not the folder I want. I have created shortcuts. How to change this.

View 3 Replies View Related

CorelDRAW Graphics Suite X6 :: Slow To Open And Save Files Across Network

Apr 23, 2012

I have recently installed Corel X6 and have found it to be painfully slow when opening files. At first I had thought it might be a network issue so I copied the file to a local drive and experienced the same problem. 

The file is only 819Kb but it takes about 3 minutes to open the file. When I first select the file in the File Open dialogue window Corel just hangs for about 1 minute. It finally responds then takes a further 2 minutes to process and open the file.

I have turned off my antivirus software as I thought this might be a file scanning issue but still the same result.

View 14 Replies View Related

CorelDRAW Graphics Suite X3 :: Lot Of Time To Open / Close Or Save Files

Aug 2, 2011

I use CorelDRAW on a daily basis and recently the program takes a lot of time to open/close/save my files, or sometimes it'll simply freeze.

View 6 Replies View Related

CorelDRAW Graphics Suite 12 :: Cannot Open Existing CDR Files - Format Not Supported

Jan 7, 2012

After recently installing Corel Draw 12 we discivered we could not open our existing .cdr files.  It would make sense if we were trying to open V:12 files with an V:5 but it seems like V:12 should support V;5 .cdr files.

View 9 Replies View Related

CorelDRAW Graphics Suite X5 :: Previews Will Not Show When Selecting CDR Files To Open

Jul 3, 2012

I'm using Windows 7.  The previews were working now they just don't work, "preview not available".  I see no check box in window 7 to turn that on or off, unlike in windows xp.  I have tried turning on large thumbnails in windows explorer when opening files, older files will show up but most recent files just show the Corel Draw icon large.

Could this be some kind of auto update from Windows? Since I have no destination, I'm never lost.

View 11 Replies View Related

CorelDRAW Graphics Suite X4 :: Unable To Open Existing Files Directly?

Oct 29, 2012

When I try to open about 90% of my files, I can't. I get an error with a yellow caution triangle with an exclamation point.  it says "Error Reading C:UsersSignsPlusDesktop.......

So I end up dragging everything to a new page.  That works fine but it's a pain ending up with multiples of everything.

View 13 Replies View Related

CorelDRAW Graphics Suite 11 :: Change Settings To Have Files Open In Same Application

Jun 21, 2011

Every time I open a new file a new Corel Draw application opens. Is there a setting I can change to have the files open in the same application? 

View 1 Replies View Related

CorelDRAW Graphics Suite X5 :: Clean Files In Open Recent History?

Apr 19, 2011

Is there a way to clean (or parcial delete) files in "FILE > OPEN RECENT" history?

[URL]

View 12 Replies View Related

CorelDRAW Graphics Suite X6 :: Website Creator - Won't Let To Open Existing HTML Files

Nov 22, 2012

I cannot open existing website .html files in Website Creator - how to open them?

View 2 Replies View Related

CorelDRAW Graphics Suite X5 :: Adobe Illustrator Files With Mesh Fills Will Not Open

Jan 16, 2013

I have purchased some clipart where the artist used Adobe Illustrator and it contained extensive Mesh Fills.  The artist sent me the same artwork in pdf & eps but I am unable to open any of them with X5.  Apparently it is a function of the mesh fills?

View 4 Replies View Related

CorelDRAW Graphics Suite 12 :: How To Open EPS File

Nov 5, 2013

Q When I import an EPS file into CorelDRAW, and print to a non-PostScript printer, the output appears pixelated and unclear. Why?

A An EPS file is a Postscript (PS) file and meant to be printed to a PostScript printer. When printed to a non-PostScript printer, it will only print the file header which is a low resolution preview of the actual file. If you wish to print the actual contents of the EPS file to a non-PostScript printer, import the file it into CorelDRAW using the PostScript Interpreted (PS, PRN, EPS) filter.So, apparently it can be done, but when I try to import this file into my Coreldraw, there is no option to import with that type of filter that I can see. Is this something that is missing in v12? If v12 wont do it, is there any other way to import this file without it coming in all pixellated? Or is there another way to convert the file into a format such as .plt?

View 1 Replies View Related

CorelDRAW Graphics Suite X5 :: Cannot Open EPS File

Mar 31, 2011

I'm trying to open an eps file in Coreldraw X5 and it's blank. Someone could try with illustrator? URl....

View 7 Replies View Related

CorelDRAW Graphics Suite X5 :: Can't Open Any File

Jun 18, 2013

I have been using Corel since 1989. I simply downloaded a pic from Corel gallery and even removed C15 many times still no joy. All hundreds of files are effected..

View 2 Replies View Related

CorelDRAW Graphics Suite X6 :: Can't Open File

Sep 18, 2012

I made a file in coreldraw x6 and unintentionally opened in corel X5.  Obviously it didn't open. But apart from that, the file neither opens in corel x6 now!!!!  

It seems it cant be opened or something like that. But anyway it still sizes 2,94MB, so I am hopeful to recover it.It was a lot of work for me wasted.   I tried to convert it to x5 format in URL....

View 7 Replies View Related

CorelDRAW Graphics Suite X5 :: More Than 1 Open File?

Mar 22, 2012

When I want to flick from one file to another in X5 draw the tab to bring up the second file is hidden behind the open one, is there a way or a short cut to save me having to minimise my open file to see the tab to maximise the second?

View 4 Replies View Related

CorelDRAW Graphics Suite X6 :: Color Changes When Open Or Import DWG?

Feb 26, 2013

When I open or import a DWG into CorelDraw X6 it changes the colors (see image).

I tried changing the Color Management Settings to Minimal Color Management which is suppose to preserve the original color when opening, importing, and pasting, but that doesn't work.

View 1 Replies View Related

CorelDRAW Graphics Suite 12 :: Unable To Open Photopaint

Jul 6, 2013

I am a long time user of Corel products (well, since Corel 4). I have been running Corel 12 for several years, as financially, as a pensioner it is not viable to keep up grading and 12 has been perfectly adequate. I am on Windows 7 Home premium, and I know that 12 was not designed for that platform, however it has been operation satisfactorily since 7 came out. Today, It has crashed, and I am unable to open photopaint at all either from the shortcut or the program list.

(Corel Draw, which is the only other part of the suite I use) appears to open and be available. I tried to repair with the original disk to no avail, so that having failed I did an uninstall, cleared the caches the temporary files and did a clean install. Corel Draw is still working, but Paint will not open at all. The logo appears then totally disappears after a few seconds leaving the desktop clear. There has been no changes to the computer recently and until last night the program was working fine.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved