When I open or import a DWG into CorelDraw X6 it changes the colors (see image).
I tried changing the Color Management Settings to Minimal Color Management which is suppose to preserve the original color when opening, importing, and pasting, but that doesn't work.
I'm unable to open/import .ai files into corel x4. Getting "corrupted file" error.
View 5 Replies View RelatedFor some reason I cannot get the color management screen to open where you see the printer, monitor, and other things that are located there.
I tried clicked on tools -color management but it opens document setting and that's it.
I am using X-15 and just not sure what I am doing wrong.
I am new to Corel Draw X4 after using illustrator. I created some artwork for a client in hot pink. But when I try to print, or to save as a pdf, or open in illustrator it is not pink.
What do I need to do with my color settings? I have contacted Oki who assisted my in downloading the correct driver to print pantone colors. Therefore must by color settings in Corel Draw?
For some reason a Document Color Palette doesn't appear by default when I create a new document. It did at one time, but now I have to manually activate it. Not sure what I did to cause this change in behavior, but I'd like to get it back as a default.
View 4 Replies View RelatedI have a 900 x 500 px image in Adobe Illustrator, which overlaps a bit the canvas on the left side.
When I open this file with Corel, it adjusts my graphics so that it's centered on the screen. The AI file is centered on another point. Also, the canvas Corel creates is A4 sized. I always have to resize the canvas and then manually adjust the position of my graphics.
Question: How can I save an AI file so that when I open it at Corel, the position and size of the canvas will be exactly the same?
Is there a way to apply a color to selected objects without having to search for the color in the color palette. So say if I am working with an image that has multiple colors but want to use only one of the colors in that image, is there a way to apply it without having to create or add it to the palette.
View 3 Replies View RelatedI have CorelDRAW X4, when I open some file(s), which takes long time to open, even which file size is smaller or bigger.
View 1 Replies View RelatedWhen designing brochures in X5, we quite often will save a file with no issues, but when we go to re-open it we end up with "encountered an improper arument" error message and the file is no longer able to be opened.
If you try to open the backup it comes up with a "runtime error" and won't open either. We are running Windows 7
In Corel draw, I click file, open, and the location is not the folder I want. I have created shortcuts. How to change this.
View 3 Replies View RelatedAbout a month and a half ago, after a microsoft update, I cannot open .cdr files from the file/open list. When going to file/open, the programs hangs up, cannot even use "cancel", and have to go to Windows Task Manager to shut down the program. All is well until I try to open a file from file/open.
I can import .eps, and everything else seems fine.My work around is to open from My Documents --Which works fine. Just is a silly little aggravation.
I have uninstalled, reinstalled, repaired, etc....all the normal fixes.
I still use Corel Draw 12 and my question is is there an easy or automatic way to make the outline color of an object the same color as the fill color? I do it the hard way of trial and error until I get the right outline color from the color dock/pallette.
View 10 Replies View RelatedI have just upgraded to Draw X6 and am having a problem importing multichannel photoshop .dcs or Illustrator .eps (with placed bitmap) files. When importing, the graphic appears upside down. Other oddities in this situation:
-This only happens to rastered images, not vector.
-If I try to flip it right-side-up the image goes blank as if it didn't get a screen refresh. But remains blank even with a manual refresh or zooming in/out, etc.
-In wireframe view it looks correct.
-It prints correctly also
Luckily, I can print the file correctly.
CorelDraw X6 - v16.1.0.843 32 bit
Windows 7 Home Premium - current update 32 bit
i'm work in society who make flags, and we use CVC Pantone of Coreldraw graphics X4.
Now we bought the new version (X5) and it's not the same parameters of colors.
For example :
X4
Pantone 485 CVC
C : 0 / M : 100 / Y: 91 / B : 0
X5
Pantone 485 CVC
C : 0 / M : 93 / Y : 100 / B : 1
How can i import the old parameters of X4 to X5.
Is there anyway to import or edit .dgn files in CorelDraw X3 ?
View 2 Replies View Related I recently started working with X5 and am having a few issues with the importing of palettes.I have created a couple of very large swatch palettes (about 1044 colors) in Photoshop CS4 and Illustrator CS4 that I would like to not have recreate in X5 (each swatch is custom named).
The photoshop swatch palette is saved as an .ACO file. I am able to open the .ACO palette in X5, however, the CMYK values do not match, and the custom name does not transfer.
-As an example, my custom black swatch in the .ACO file is called A1 and its CMYK value is 60, 49, 47, 100. However, when opened in X5 it is only identified by its CMYK value, which has changed to 29, 22, 29, 30 (which is more of a semi-dark grey than a black). In fact, all of the colors look as if they have been desaturated by 50-75% (that's a huge guesstimate on my part).
After struggling with my .ACO palette I thought I would try to import my .AI file.
X5 gives the option to open a palette that was created in Illustrator if the palette itself is saved as an .AI (which can be done directly from the swatch menu in AI. I have tried opening my .AI palette in X5- it allows me to chose the file, however, nothing happens.
I have encountered an error when I imported a prn file to coreldraw x4 in win7.
after i choose that the file be imported as curve this error is showing :
Error: definefont
OFFENDING COMMAND: defineresource
STACK:
/TT15ET00
/TT15ET00
-dictionary-
This may be a silly question but I cannot find where to import all my custom keyboard shortcuts from X5. Is this doable?
View 3 Replies View RelatedI've imported a pdf template (2x2 labels) into corel draw. I've finished designing the first label and want to fill in the rest of the sheet. will not allow me to cut and paste.
View 2 Replies View RelatedI'm having a major issue here, I use custom colors (created in my custom palette), X^ used to hold it very nicely, even in PDF exports etc.
Now - with the latest update, X6 "forgets" the custom colors, it resets it to default color, I have to manually set every object to the custom color all over again.
Is there anyway to transform a 4-color CorelDraw picture into a 2-color one at reasonably good quality?
The problem I met is at the galley.
I could, or might, only be able to get a 2-color printer at reasonably good price.
The original design is 4-color. But the actual detail is not very important.
They are book covers, which only need to protect the book.
The exported picture is shown below:
To create 2-color artwork from any colored vector clipart I used to be able to:
import colored clipart convert to CMYK if needed select entire graphic and create new styles with 2 parents change (edit) the colored parent to a named Pantone spot color (the child colors automatically become percentages of the Pantone spot color) "find and change" the remaining CMYK to Grayscale, and then back to CMYK (this ignors the spot color and converts the annoying rich blacks to percentages of K) export to a PDF file--which when imported into, say, InDesign, will separate on the K and Spot Color Plates only, in all its glorious shades of gray and tints of Pantone spot color.
I'm completely at a loss on how to do this in X6, and I'm on a short deadline.
I want to import a font file to Corel X15.
View 2 Replies View Related we are developing a Website where users can design individual labels and other print materials. Server-sided "PDFlib" creates the PDF files. We would like to import these PDF's into Corel X6.
File: [URL]........
Created with: PDFlib Personalization Server 8.0.4p2 (PHP5/Linux-X86_64)
PDF-Version: 1.6
Compression: FlateDecode/
Fonts: no fonts embedded
In the pdf are vector objects, graphics and text
I can open the PDF easily with Adobe Illustrator, Reader, Adobe Acrobat X Pro and other software.
But if I try to import the PDF into Corel: "Corrupt file"
I am trying to import a pdf file ford connect van template into CorelDraw x5 but am having no joy.
View 2 Replies View RelatedI import dxf file created in CadKey or SolidWorks. I have done this thousands of times but all of a sudden they do not import in the correct orientation x/y plane. They appear to be importing on the edge. I have gone back to old dxf files that have worked perfectly in the past and they no longer import correctly.
Have I, unknowingly, changed some setting on Corel that effects the import of dxf files?
Just wondering how far back the latest version of CorelDraw will import the CDR files?
View 4 Replies View RelatedI'm trying to import into Coreldraw X3 files which were emailed to me by an Adobe CS4 user:
[URL]
(they are attached via a wetransfer link because as I found out the file size limit here is 256k and I cannot compress the files down to that size.) After reading several of the threads here, I'm not any smarter. I've tried various settings to import the .pdf, and regardless of which option I choose, I get a file corrupted error - it looks like the pdf version output to from Illustrator is flat out not supported by coreldraw. it opens fine in foxit reader, which tells me it's pdf 1.5 version.the .eps imports as a group of 542 objects but I cannot see any of these objects in the Object Manager docker.
How can i open drawings i made using autoCAD with CorelDRAW? But with keeping the same scale of my original drawings.
By the way i am new to AutoCAD and CorelDRAW
I have PDF map created with latest PDF Creator. Originally it was made with GIS software Geo Media Professional (v6). Document looks good while previewing with Reader. When importing to Photoshop CS5 - looks good to (but raster). But when I'm trying to import it to CorelDrawX5 strange things happens:
Import takes a lot of time After hitting [Enter] file (group name.pdf) origin is about 5000mm;6400mm (width 45720mm, height 45720mm) - so it is definitely far from any page and much much bigger than original - in this case original was 2500mm width and 1067mm height landscape prepared to print on HP DesignJet 800PS 42'' roll hitting F4 - max range warning appears. I was trying to move group somewhere in visible work area using X,Y - strange results - negative position appears after hitting Enter
In CorelDRAW X4 I didn't get such "feature". There is no additional font embedded in document (ARIAL, HELVETICA).
bought a stockphoto EPS and it looks corrupt when i open it. i see there is a code page select option which seems to affect the graphic, but still much corruption when imported.
View 3 Replies View Related
