I am new to Corel Draw X4 after using illustrator. I created some artwork for a client in hot pink. But when I try to print, or to save as a pdf, or open in illustrator it is not pink.
What do I need to do with my color settings? I have contacted Oki who assisted my in downloading the correct driver to print pantone colors. Therefore must by color settings in Corel Draw?
I just replaced the hard drive in my laptop. I have installed Coreldraw 12 again and it opens and works fine.
Problem is when I create and save a file. The file appears on the desktop ( if that is where I save it ) but it has an odd icon with a red A on the bottom corner. If I click on it, I get a "not a valid win32 application" message.
However if I open Corel12 and import the file, it appears to be fine.
I have recently installed Corel X6 and have found it to be painfully slow when opening files. At first I had thought it might be a network issue so I copied the file to a local drive and experienced the same problem.
The file is only 819Kb but it takes about 3 minutes to open the file. When I first select the file in the File Open dialogue window Corel just hangs for about 1 minute. It finally responds then takes a further 2 minutes to process and open the file.
I have turned off my antivirus software as I thought this might be a file scanning issue but still the same result.
I use CorelDRAW on a daily basis and recently the program takes a lot of time to open/close/save my files, or sometimes it'll simply freeze.
View 6 Replies View RelatedI just got X6. I can't get my default color mode to save. I go to options, document,general and change it from CMYK to RGB click document to save styles for all but it doesn't save it. When I export I have to manually change CMYK to RGB and the resolution every time. In other versions once I set it it was always there. Am I missing a setting somewhere?
View 2 Replies View RelatedWhen I open or import a DWG into CorelDraw X6 it changes the colors (see image).
I tried changing the Color Management Settings to Minimal Color Management which is suppose to preserve the original color when opening, importing, and pasting, but that doesn't work.
For some reason I cannot get the color management screen to open where you see the printer, monitor, and other things that are located there.
I tried clicked on tools -color management but it opens document setting and that's it.
I am using X-15 and just not sure what I am doing wrong.
For some reason a Document Color Palette doesn't appear by default when I create a new document. It did at one time, but now I have to manually activate it. Not sure what I did to cause this change in behavior, but I'd like to get it back as a default.
View 4 Replies View RelatedIn this lesson we will consolidate code to prevent code reuse. Follow along as we demonstrate by doing the following and more:
Apply a color to a form command button, loop form controls, and save and get the color from registry
Part 2 of 7
cs_setInnerHtml('video_43f4e134-ee93-489d-ba2f-80042d243821','');
[URL]
I have purchased some clipart where the artist used Adobe Illustrator and it contained extensive Mesh Fills. The artist sent me the same artwork in pdf & eps but I am unable to open any of them with X5. Apparently it is a function of the mesh fills?
View 4 Replies View RelatedIs there a way to apply a color to selected objects without having to search for the color in the color palette. So say if I am working with an image that has multiple colors but want to use only one of the colors in that image, is there a way to apply it without having to create or add it to the palette.
View 3 Replies View RelatedI have CorelDRAW X4, when I open some file(s), which takes long time to open, even which file size is smaller or bigger.
View 1 Replies View RelatedWhen designing brochures in X5, we quite often will save a file with no issues, but when we go to re-open it we end up with "encountered an improper arument" error message and the file is no longer able to be opened.
If you try to open the backup it comes up with a "runtime error" and won't open either. We are running Windows 7
In Corel draw, I click file, open, and the location is not the folder I want. I have created shortcuts. How to change this.
View 3 Replies View RelatedAbout a month and a half ago, after a microsoft update, I cannot open .cdr files from the file/open list. When going to file/open, the programs hangs up, cannot even use "cancel", and have to go to Windows Task Manager to shut down the program. All is well until I try to open a file from file/open.
I can import .eps, and everything else seems fine.My work around is to open from My Documents --Which works fine. Just is a silly little aggravation.
I have uninstalled, reinstalled, repaired, etc....all the normal fixes.
I am having trouble with CorelDraw X5 SP3 in Windows 7-64 Professional. When I am in CorelDraw or in PhotoPaint, and try to Export as a JPG or PNG file, I get the dialog box showing the picture and details on the right side. But then when I click OK, NO File is saved. This is frustrating. So I go back and try it again and no file saved. So then I try a PDF save and it does it. Then I go back and try to get my PNG saved and it may or may not save it. Finally, I fiddle with it and I can get the FILE SAVED. What a hassle. What is blocking CorelDraw from saving JPG and PNG to finish their generation?
View 12 Replies View RelatedI still use Corel Draw 12 and my question is is there an easy or automatic way to make the outline color of an object the same color as the fill color? I do it the hard way of trial and error until I get the right outline color from the color dock/pallette.
View 10 Replies View RelatedI'm having a major issue here, I use custom colors (created in my custom palette), X^ used to hold it very nicely, even in PDF exports etc.
Now - with the latest update, X6 "forgets" the custom colors, it resets it to default color, I have to manually set every object to the custom color all over again.
Is there anyway to transform a 4-color CorelDraw picture into a 2-color one at reasonably good quality?
The problem I met is at the galley.
I could, or might, only be able to get a 2-color printer at reasonably good price.
The original design is 4-color. But the actual detail is not very important.
They are book covers, which only need to protect the book.
The exported picture is shown below:
To create 2-color artwork from any colored vector clipart I used to be able to:
import colored clipart convert to CMYK if needed select entire graphic and create new styles with 2 parents change (edit) the colored parent to a named Pantone spot color (the child colors automatically become percentages of the Pantone spot color) "find and change" the remaining CMYK to Grayscale, and then back to CMYK (this ignors the spot color and converts the annoying rich blacks to percentages of K) export to a PDF file--which when imported into, say, InDesign, will separate on the K and Spot Color Plates only, in all its glorious shades of gray and tints of Pantone spot color.
I'm completely at a loss on how to do this in X6, and I'm on a short deadline.
I have a CDR project I am working on. As I work, I occasionally click the "save" icon to save the work. When I am finished for the time being, I am unable to click on either the "X" or "Exit". The program doesn't respond, and I have to go to the Windows Task Manager to shut down CorelDraw. Because of this, the work is not saved. I have Windows 7, and I also have all of the X5 updates installed.
View 5 Replies View RelatedI have done something to my X5 or X4 document that has disabled the ability to publish to PDF. What I could have done that would have disabled this? I just have text and graphics, on a poster sized document. it is one page.
View 2 Replies View RelatedI'm using CorelDraw X5 with Windows 7. When I go to save a file often it won't save unless I repeat the save file command several times. Once I do get it saved the file then shows to be locked.
View 2 Replies View Related"Save as", "cut" and some other funtions are not available within my CorelDraw. what could be the cause for this behavior and how I could get rid of it.
View 5 Replies View RelatedRunning CorelX5 on windows 7 - On my work computer when I have a file open and hit the save button I'm getting the message "can not save, file is open or being used by other program". I have to save as a different name. I assume another program is to blame and is associated with .cdr.
View 2 Replies View RelatedI have tried on numerous occasions to save my corel draw files to adobe illustrator but once you try to save a page in corel to AI the program locks up in the background so that you can't close it and when I try to enter my new AI file into my internet "dropbox" so that my web-designer can use the files, I am just informed that copying the file into dropbox is not possible as the file is currently open in Corel Draw?
I have tried to get the hot-fix/updated patch for Corel X6 however that is an even worse nightmare with all the swings and roundabouts Corel trys to get you to go on before you can get a simple update.
My web designer is waiting to start work on my new website but I just can not get my design work to him.
Why the Autobackup in X5 is older than the last save. I wonder how many people are losing work because they save over their original file after a crash.
View 3 Replies View RelatedI am using CorelDraw X5 and my system is Windows 7 and is a 64 bit.
Most of the time when I am drawing and go to save my file, CorelDraw X5 will freeze up (not responding) and then crash. Most of the time, I can go and restart Corel, open my file and it will have saved where I wanted it to; but sometimes it will cause me to have to use the auto-backup or just the back up file.
X3 - I use X4 at work with no problems but at home I have X3. I set my workspace the way I want it and all my presets the way I want. I hit tools/save stings as default. I then save my workspace as todays date. Close corel and reopen. It starts with the defaults every time! I have to manually choose my workspace and even after doing so my settings have reverted back to default i.e. text to be point not inches like I chose etc.
View 3 Replies View RelatedI am trying to save a CorelDraw X5 file in Adobe Illustrator, so I can bring it into Illustrator CS4 to work on it in Illustrator.
It will only save in CDR format. Whatever different file format I try I get a message "No object to Print, Export, or Save" I originally grouped it and saved it in CDR.
I create a pdf page and save. when i add a second page to the document and save, the second page is not saved in the pdf. how can I get the whole document to save in one pdf file?
View 4 Replies View Related