I am using CorelDraw X5 and my system is Windows 7 and is a 64 bit.
Most of the time when I am drawing and go to save my file, CorelDraw X5 will freeze up (not responding) and then crash. Most of the time, I can go and restart Corel, open my file and it will have saved where I wanted it to; but sometimes it will cause me to have to use the auto-backup or just the back up file.
I've recently got a new computer, and after installing corel on it, I've found that I am unable to open files with corel, as soon as i press the open button corel crashes, but i am able to open the files when i goto the actual file in my documents and click open in there, and i am unable to save files any way whatsoever (due to crashing isues again) i am also unable to export my artwork to a jpeg, also an immediate crash.
View 8 Replies View RelatedRunning CorelX5 on windows 7 - On my work computer when I have a file open and hit the save button I'm getting the message "can not save, file is open or being used by other program". I have to save as a different name. I assume another program is to blame and is associated with .cdr.
View 2 Replies View RelatedI am trying to save a CorelDraw X5 file in Adobe Illustrator, so I can bring it into Illustrator CS4 to work on it in Illustrator.
It will only save in CDR format. Whatever different file format I try I get a message "No object to Print, Export, or Save" I originally grouped it and saved it in CDR.
How to save as coreldraw file in .tiff format
View 6 Replies View RelatedUsing X5 suite. Just installed Windows 7 on my stand alone system. Now when I make a change to a file and attempt to resave (Save) it, the message box says the file is "Read Only" and asks me to save under another name.
View 5 Replies View RelatedWhen I select "Save As" or "Export", the list of available file formats is only a fraction of what the help file shows as supported file formats. The help file instructs me to use the instructions in "To modify or repair a CorelDRAW Graphics Suite installation" but this does not work. How can I get or verify that all the file format filters listed in Supported file formats are installed in my CorelDraw 15?
Right now I am particularly interested in saving a CDR in the Visio (VSD) file format, but I would like to have of them available.
A .cmx file produced by CorelDRAW x5 can be opened / imported / edited in any previous version of CorelDRAW? Why size changes? When I export to .cmx size doubles. If I use the option "Save as ... cmx" the file size decreases. What´s the difference? URL.....
View 6 Replies View Relatedin corel x6 when we save document for 1st time corel doesn't creates back up file.
View 8 Replies View Relatedam using windows 7 without aero windows. Twice when using Corel draw and saving the program has crashed. I have then had to ctrl alt delete and shut the program down.
View 1 Replies View RelatedWindows Vista 64, corel crashes on creating new document or opening existing one. It crashes twice actually. First crash spews out this:
Nazwa zdarzenia problemu: APPCRASH Nazwa aplikacji: CorelDRW.exe Wersja aplikacji: 16.0.0.707 Sygnatura czasowa aplikacji: 4f4c60a4 Nazwa modułu z błędem: MSVCR100.dll Wersja modułu z błędem: 10.0.40219.1 Sygnatura czasowa modułu z błędem: 4d5f034a Kod wyjątku: 40000015 Przesunięcie wyjątku: 00000000000761c9 Wersja systemu operacyjnego: 6.0.6002.2.2.0.256.6 Identyfikator ustawień regionalnych: 1045 Dodatkowe informacje 1: e139 Dodatkowe informacje 2: ed2429a1e405cd1a6fea3328235a733b Dodatkowe informacje 3: 08d2 Dodatkowe informacje 4: 7206fe9a4464dcae865f27c5d1766c68
second with this:
Nazwa zdarzenia problemu: APPCRASH Nazwa aplikacji: CorelDRW.exe Wersja aplikacji: 16.0.0.707 Sygnatura czasowa aplikacji: 4f4c60a4 Nazwa modułu z błędem: mfc100u.dll Wersja modułu z błędem: 10.0.40219.1 Sygnatura czasowa modułu z błędem: 4d5f1436 Kod wyjątku: c0000005 Przesunięcie wyjątku: 0000000000001b33 Wersja systemu operacyjnego: 6.0.6002.2.2.0.256.6 Identyfikator ustawień regionalnych: 1045 Dodatkowe informacje 1: 433d Dodatkowe informacje 2: c4f485ce7f6b39f48369e75a4a5c6af7 Dodatkowe informacje 3: f657 Dodatkowe informacje 4: bc294d6383f97effacd7dcb23980b3fe
Both are Visual C++ related as far as I can see. I have all the Visual C++ redistributables installed and up to date.
I'm having a terrible time trying to export drawings out of X6 as EPS. Every time I do the program crashes and on many occasions corrupts the CDR file I'm working on.
View 2 Replies View RelatedI work at a design company and we just updated my system with version 6. I was previously working on 5 but when I pull items off of our server that were saved from my computer in version 5 it pops up a quick preview and then "Corel draw has stopped unexpectedly" However I can't just work from 5 because that's the reason why we upgraded my system to begin with. It was crashing out every 10 minutes (literally)
There's obviously a glitch here and it's starting to overwhelm me. We're on deadlines and I can't have my system crashing out. I need to be productive!
I am currently experiencing a big problem when using X4 which is causing some major headaches here in the Workplace!
Whenever I hit space, paste text or do anything involving fonts I get a Microsoft Visual C++ Runtime Error folowed by a non-responding dialog with force close.
I have been using X4 for some years now and not sure what has caused this issue, it was fine in the morning and stopped working in the afternoon.
I have SP2 installed and no changes have been made to any settings to cause this.
X4 is the main programme I use here at work and this problem is grinding the place to a halt.
I'm a LONG time Corel user -- back to version 4. Have been using X3 for years. Bought X5 but liked X3 better so I kept using it. (Basically only used X5 to import customer Illustrator files and PDFs that wouldn't import correctly into X3.)
Got new computer with Windows 7 and decided to upgrade to X6 64 bit. Overall it's been fine. Only using for a few days.
One thing I do are custom estimates for my clients. I keep several "stock" paragraphs of content on the desktop so I can copy and paste these into the estimate. Typically I just open an old estimate, rename it, and start the new estimate.
Opened X3 estimate in X6 and renamed it. Having some strange behaviors. The file was way too big. Should have been a couple hundred k and it was more than 4mb. Crashed several times. When I would add a page and copy content from a previous page, it would make the desktop grid printable, and I couldn't turn it off. Crashed some more.
Decided to start with a new X6 document. Copied pieces from the X3 file to make a new estimate template. File size now looks correct at a couple hundred k. Everything working fine except when I try to copy text from a paragraph box on the desktop INTO a paragraph box on the page it crashes. Not every time, but often.
I am running a Windows XP machine with Corel Draw X6 (32 Bit) and under the Trace Bitmap option, Quick Trace will work but anything under the Centerline Trace and Outline Trace options will upset Corel Draw and freeze. The program does not say "Not Responding" but no functions will work or the mouse will not change cursor and the only way to exit is to end the task.I have run updates on the program and upgraded to X6.1 but with no luck, still the same issue.
View 3 Replies View RelatedI find when i open any file i have saved as an X6 file CorelDraw crashes ...the only way it works is if i open a blank template or older file (not saved in x6) first
View 11 Replies View RelatedFrom time to time when saving a file the file gets corrupted. When trying to open the file, only a blank page is visible. Trying to open the file as zip says "error in packed file..." This happens several times a day (we are 5 users and this happens to everyone).
The out of memory issue is also a huge problem for us. This happens several times a day, often during printing.
Are Corel taking these issues seriously or don't you care about professional users which are dependent on reliable tools?
3 users at Win7-64, 2 at XP-32. All computers are top notch with all patches/updates installed.
When I create my merge document, regardless of how many pages, I will need to make edits to some of the text. Corel will randomly crash when I try to edit the text. Every time. I have lots of work to do and have not the time to deal with this.
Using Corel Draw X4 v14.0.0.701
Just a guess but with 64 bit Coreldraw maybe we would be able to Print Merge large files without crashing or having to break it into digestible bits.
Do vector conversion of complex images.Use Coreldraw like a publishing program, - kick Indesign
Computer memory is no longer the issue - 32 bit computer programs are.Until then I will stay with X4. run in Windows 7, 64 bit with 12 Gigs RAM.
I am having trouble with CorelDraw X5 SP3 in Windows 7-64 Professional. When I am in CorelDraw or in PhotoPaint, and try to Export as a JPG or PNG file, I get the dialog box showing the picture and details on the right side. But then when I click OK, NO File is saved. This is frustrating. So I go back and try it again and no file saved. So then I try a PDF save and it does it. Then I go back and try to get my PNG saved and it may or may not save it. Finally, I fiddle with it and I can get the FILE SAVED. What a hassle. What is blocking CorelDraw from saving JPG and PNG to finish their generation?
View 12 Replies View RelatedI have a CDR project I am working on. As I work, I occasionally click the "save" icon to save the work. When I am finished for the time being, I am unable to click on either the "X" or "Exit". The program doesn't respond, and I have to go to the Windows Task Manager to shut down CorelDraw. Because of this, the work is not saved. I have Windows 7, and I also have all of the X5 updates installed.
View 5 Replies View RelatedI have done something to my X5 or X4 document that has disabled the ability to publish to PDF. What I could have done that would have disabled this? I just have text and graphics, on a poster sized document. it is one page.
View 2 Replies View RelatedI'm using CorelDraw X5 with Windows 7. When I go to save a file often it won't save unless I repeat the save file command several times. Once I do get it saved the file then shows to be locked.
View 2 Replies View Related"Save as", "cut" and some other funtions are not available within my CorelDraw. what could be the cause for this behavior and how I could get rid of it.
View 5 Replies View RelatedI have tried on numerous occasions to save my corel draw files to adobe illustrator but once you try to save a page in corel to AI the program locks up in the background so that you can't close it and when I try to enter my new AI file into my internet "dropbox" so that my web-designer can use the files, I am just informed that copying the file into dropbox is not possible as the file is currently open in Corel Draw?
I have tried to get the hot-fix/updated patch for Corel X6 however that is an even worse nightmare with all the swings and roundabouts Corel trys to get you to go on before you can get a simple update.
My web designer is waiting to start work on my new website but I just can not get my design work to him.
Why the Autobackup in X5 is older than the last save. I wonder how many people are losing work because they save over their original file after a crash.
View 3 Replies View RelatedI just replaced the hard drive in my laptop. I have installed Coreldraw 12 again and it opens and works fine.
Problem is when I create and save a file. The file appears on the desktop ( if that is where I save it ) but it has an odd icon with a red A on the bottom corner. If I click on it, I get a "not a valid win32 application" message.
However if I open Corel12 and import the file, it appears to be fine.
X3 - I use X4 at work with no problems but at home I have X3. I set my workspace the way I want it and all my presets the way I want. I hit tools/save stings as default. I then save my workspace as todays date. Close corel and reopen. It starts with the defaults every time! I have to manually choose my workspace and even after doing so my settings have reverted back to default i.e. text to be point not inches like I chose etc.
View 3 Replies View RelatedI create a pdf page and save. when i add a second page to the document and save, the second page is not saved in the pdf. how can I get the whole document to save in one pdf file?
View 4 Replies View RelatedI am using Corel X5 and need to save back to version 10 or 12. Even though I change the settings when I "save as" the file remains an X5. Unfortunately the engraving company I use cannot open the X5.
View 3 Replies View Related
