CorelDRAW Graphics Suite X5 :: Corrupt Files And Out Of Memory Crashing?
Nov 10, 2011
From time to time when saving a file the file gets corrupted. When trying to open the file, only a blank page is visible. Trying to open the file as zip says "error in packed file..." This happens several times a day (we are 5 users and this happens to everyone).
The out of memory issue is also a huge problem for us. This happens several times a day, often during printing.
Are Corel taking these issues seriously or don't you care about professional users which are dependent on reliable tools?
3 users at Win7-64, 2 at XP-32. All computers are top notch with all patches/updates installed.
I am using corel x3 a long time but never, never had this kind of problem. When i work in corel enviorenment after i have finished my work i go to save my work. But then is the problem It Saves the file with Large Memory on it. let's say if the file normally would be 200 K, now it saves with 3 MB. And if i import some other files in my work then the saved file will be even bigger. If i Delete the files that were imported The Saved File will be Again the same SIZE ! Even if a take one part of the file, let's say if i import only one small text and put it in another file and save it like that, the saved file will be 2 MB. I had a lots of problems, i had saved files on this way with 23-24 MB and when i open them it takes like forever. When you look that file in corel it has nohing in it, absolutely nothing that should be 24 MB. But all of my important work is in that files how to make all things back to normal again,
I work at a design company and we just updated my system with version 6. I was previously working on 5 but when I pull items off of our server that were saved from my computer in version 5 it pops up a quick preview and then "Corel draw has stopped unexpectedly" However I can't just work from 5 because that's the reason why we upgraded my system to begin with. It was crashing out every 10 minutes (literally)
There's obviously a glitch here and it's starting to overwhelm me. We're on deadlines and I can't have my system crashing out. I need to be productive!
I find when i open any file i have saved as an X6 file CorelDraw crashes ...the only way it works is if i open a blank template or older file (not saved in x6) first
I do have problem with my newly installed CorelDraw X5. Before X5 we used Corel 12 in our company.
I have project file (150 MB) with lots of text, bitmaps, vectors - about 100 pages. File opens but I can't save it. I always get OUT OF MEMORY error. I even tried to divide this file into 2 smaller parts but still doesn't work.
What I noticed - Corel X5 after clean start (without opened project) takes about 80MB of RAM in task manager. When I open project usage changes from 80MB to 1,2GB. While saving it takes 1,6GB of RAM and it crashes.
To compare - Corel 12 and after opening same project file Corel 12 takes much less of memory - about 770MB and it works without problem.
I opened my CorelDRAW X3 to find that the colours on screen look corrupted.
I use the "Optimised for professional output setting" in Colour Management which I never change.
Now, rather than looking fairly close to printed colours, they look very bright... too bright! (see screen shot)
I think that i have had this problem before and i ended up uninstalling and reinstalling. I would like to avoid this if i can as have have a lot of custom settings that i would have to re-do.
we are developing a Website where users can design individual labels and other print materials. Server-sided "PDFlib" creates the PDF files. We would like to import these PDF's into Corel X6.
File: [URL]........
Created with: PDFlib Personalization Server 8.0.4p2 (PHP5/Linux-X86_64)
PDF-Version: 1.6 Compression: FlateDecode/
Fonts: no fonts embedded In the pdf are vector objects, graphics and text
I can open the PDF easily with Adobe Illustrator, Reader, Adobe Acrobat X Pro and other software.
But if I try to import the PDF into Corel: "Corrupt file"
how to fix a corrupted CDR file? I was working on a file of 159+ MB file when the power suddenly went off and I couldn't open the file when the power was back. I know the file could have been corrupted and I don't have a backup of the file also.
BTW, an interesting thing to note is that I tried to open the file is 7zip as if it were a zip file. To my surprise there was the file along with some xml files, but unfortunately I could not extract it as it showed up a message File is corrupt.
How to recover a brochure that I created. Now I can view it in the preview but whenever I try and open the file it stops about 30% - 40% through opening and then crashes Corel and shuts the program down. Now I have tried to import the file as well but the same thing happens. I don't want to have to redraw the entire brochure. The file is about 186MB.
I noticed these two options in the status bar . what are they... how they work. i dragged into my toolbar and showing that memory allocated and swap space.
we are using a Dell T5500, WIN7, 64bit with 24 GB main memory. Corel X5 seems to use only a small part of it, although we have large files and jobs (e.g. to export to Adobe Illustrator). This takes a long time (> 10 min), where sometimes Corel even writes nothing to the AI file.
CPU usage is medium, memory usually around 2GB, but not larger.
How can we bring Corel to use more memory to be faster and/or in order to avoid swapping else writing nothing into Adobe Illustrator?
am using windows 7 without aero windows. Twice when using Corel draw and saving the program has crashed. I have then had to ctrl alt delete and shut the program down.
I am using CorelDraw X5 and my system is Windows 7 and is a 64 bit.
Most of the time when I am drawing and go to save my file, CorelDraw X5 will freeze up (not responding) and then crash. Most of the time, I can go and restart Corel, open my file and it will have saved where I wanted it to; but sometimes it will cause me to have to use the auto-backup or just the back up file.
Windows Vista 64, corel crashes on creating new document or opening existing one. It crashes twice actually. First crash spews out this:
Nazwa zdarzenia problemu: APPCRASH Nazwa aplikacji: CorelDRW.exe Wersja aplikacji: 16.0.0.707 Sygnatura czasowa aplikacji: 4f4c60a4 Nazwa modułu z błędem: MSVCR100.dll Wersja modułu z błędem: 10.0.40219.1 Sygnatura czasowa modułu z błędem: 4d5f034a Kod wyjątku: 40000015 Przesunięcie wyjątku: 00000000000761c9 Wersja systemu operacyjnego: 6.0.6002.2.2.0.256.6 Identyfikator ustawień regionalnych: 1045 Dodatkowe informacje 1: e139 Dodatkowe informacje 2: ed2429a1e405cd1a6fea3328235a733b Dodatkowe informacje 3: 08d2 Dodatkowe informacje 4: 7206fe9a4464dcae865f27c5d1766c68
second with this:
Nazwa zdarzenia problemu: APPCRASH Nazwa aplikacji: CorelDRW.exe Wersja aplikacji: 16.0.0.707 Sygnatura czasowa aplikacji: 4f4c60a4 Nazwa modułu z błędem: mfc100u.dll Wersja modułu z błędem: 10.0.40219.1 Sygnatura czasowa modułu z błędem: 4d5f1436 Kod wyjątku: c0000005 Przesunięcie wyjątku: 0000000000001b33 Wersja systemu operacyjnego: 6.0.6002.2.2.0.256.6 Identyfikator ustawień regionalnych: 1045 Dodatkowe informacje 1: 433d Dodatkowe informacje 2: c4f485ce7f6b39f48369e75a4a5c6af7 Dodatkowe informacje 3: f657 Dodatkowe informacje 4: bc294d6383f97effacd7dcb23980b3fe
Both are Visual C++ related as far as I can see. I have all the Visual C++ redistributables installed and up to date.
I'm having a terrible time trying to export drawings out of X6 as EPS. Every time I do the program crashes and on many occasions corrupts the CDR file I'm working on.
What to try on my computer to counter the frequent and destructive X5 shut downs that are happening. I've read about this problem in other threads, so I know it's not just me or my system.X5 shuts down many, many times every day. I don't think I've been able to work for 15 minutes straight yet without it crashing.
I am running a fast dual-core Intel, XP Pro SP3, 2 GB RAM, ATI Sapphire/Radeon 1GB card, oodles of hard drive space. I can run the hottest, most demanding games no problem. I run hundreds of other apps with no problem. I had no similar problem with X4 on this machine. I have no similar problem with other Corel apps, either.
X5 crashes still happen after I close down as many memory-resident apps as I can. I can't strip it down much further.I usually have a few (3-4) dockers open, one or two palettes, and my files include several bitmaps which may include transparencies or colour masks. I have about 650 fonts installed.
X5 shuts down on me many times during every work session. Sometimes when I am changing fonts, sometimes when editing bitmaps, sometimes when importing bitmaps, sometimes when applying a transparency. Bang - just shuts down. I can have Corelpaint open editing a bitmap and CD closes underneath it. I can open window to import a file and CD closes as I search the thumbnails. It closes when I click the change page tab.
Doesn't seem to be any specific act or function that closes it - it just shuts down. Gone. No warning. I lose everything since the previous save. Half the time the working file is corrupted, too, so I can't even restore it. I have to keep numerous versions on disk and use save-as with every save to keep just one alive.
I notice that the option to set memory usage has gone from the global options menu. Maybe it's bad memory management and we need that option back? I'd be happy to assign a higher percentage of RAM to X5.
I am currently experiencing a big problem when using X4 which is causing some major headaches here in the Workplace!
Whenever I hit space, paste text or do anything involving fonts I get a Microsoft Visual C++ Runtime Error folowed by a non-responding dialog with force close.
I have been using X4 for some years now and not sure what has caused this issue, it was fine in the morning and stopped working in the afternoon.
I have SP2 installed and no changes have been made to any settings to cause this.
X4 is the main programme I use here at work and this problem is grinding the place to a halt.
I'm a LONG time Corel user -- back to version 4. Have been using X3 for years. Bought X5 but liked X3 better so I kept using it. (Basically only used X5 to import customer Illustrator files and PDFs that wouldn't import correctly into X3.)
Got new computer with Windows 7 and decided to upgrade to X6 64 bit. Overall it's been fine. Only using for a few days.
One thing I do are custom estimates for my clients. I keep several "stock" paragraphs of content on the desktop so I can copy and paste these into the estimate. Typically I just open an old estimate, rename it, and start the new estimate.
Opened X3 estimate in X6 and renamed it. Having some strange behaviors. The file was way too big. Should have been a couple hundred k and it was more than 4mb. Crashed several times. When I would add a page and copy content from a previous page, it would make the desktop grid printable, and I couldn't turn it off. Crashed some more.
Decided to start with a new X6 document. Copied pieces from the X3 file to make a new estimate template. File size now looks correct at a couple hundred k. Everything working fine except when I try to copy text from a paragraph box on the desktop INTO a paragraph box on the page it crashes. Not every time, but often.
I am running a Windows XP machine with Corel Draw X6 (32 Bit) and under the Trace Bitmap option, Quick Trace will work but anything under the Centerline Trace and Outline Trace options will upset Corel Draw and freeze. The program does not say "Not Responding" but no functions will work or the mouse will not change cursor and the only way to exit is to end the task.I have run updates on the program and upgraded to X6.1 but with no luck, still the same issue.
When I create my merge document, regardless of how many pages, I will need to make edits to some of the text. Corel will randomly crash when I try to edit the text. Every time. I have lots of work to do and have not the time to deal with this.
I've recently got a new computer, and after installing corel on it, I've found that I am unable to open files with corel, as soon as i press the open button corel crashes, but i am able to open the files when i goto the actual file in my documents and click open in there, and i am unable to save files any way whatsoever (due to crashing isues again) i am also unable to export my artwork to a jpeg, also an immediate crash.
I have a large file (17000KB) and it keeps crashing saying it is out of memory. Is there a good way to deal with this file? I can open it and try to delete parts of it but then when I try to save or save it as a different doc, it will crash.
why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
Client supplies me with word document, I make a PDF from it and then from Acrobat create an ESP file, this is done as an eps file is much less likely to cause probs then importing a PDF, I then print from the Coreldraw file with the EPS pages no problem. The problem then arises when I have to then create a PDF file from COreldraw for the client - any EPS files in the document do not appear in the PDF - so there lies the problem.I cannot alway directly import a PDF file (often screws up) even if I save fonts as outlines. Saving as EPS overcomes most/all issues.
Resetting the User Setting with the the F8 key didn't solve the problem. Once the user gets caught up on a couple projects I'll try to update the version to SP3 and the hotfix.
