CorelDRAW Graphics Suite X6 :: Memory-swap Space
Nov 7, 2013mem-swap.jpg
I noticed these two options in the status bar . what are they... how they work. i dragged into my toolbar and showing that memory allocated and swap space.
ADVERTISEMENT
CorelDRAW Graphics Suite X3 :: Saving Files With Big Memory Instead Of Small Memory?
May 6, 2011I am using corel x3 a long time but never, never had this kind of problem. When i work in corel enviorenment after i have finished my work i go to save my work. But then is the problem It Saves the file with Large Memory on it. let's say if the file normally would be 200 K, now it saves with 3 MB. And if i import some other files in my work then the saved file will be even bigger. If i Delete the files that were imported The Saved File will be Again the same SIZE ! Even if a take one part of the file, let's say if i import only one small text and put it in another file and save it like that, the saved file will be 2 MB. I had a lots of problems, i had saved files on this way with 23-24 MB and when i open them it takes like forever. When you look that file in corel it has nohing in it, absolutely nothing that should be 24 MB. But all of my important work is in that files how to make all things back to normal again,
View 9 Replies View RelatedCorelDRAW Graphics Suite X5 :: High Memory Usage And Out Of Memory Error
Nov 4, 2011I do have problem with my newly installed CorelDraw X5. Before X5 we used Corel 12 in our company.
I have project file (150 MB) with lots of text, bitmaps, vectors - about 100 pages. File opens but I can't save it. I always get OUT OF MEMORY error. I even tried to divide this file into 2 smaller parts but still doesn't work.
What I noticed - Corel X5 after clean start (without opened project) takes about 80MB of RAM in task manager. When I open project usage changes from 80MB to 1,2GB. While saving it takes 1,6GB of RAM and it crashes.
To compare - Corel 12 and after opening same project file Corel 12 takes much less of memory - about 770MB and it works without problem.
Where from comes this memory usage difference?
My PC:
Windows 7 - 32bit
4GB of RAM
Intel Core2Duo 2 x 3.0GHz
700GB free space on drive C:
CorelDRAW Graphics Suite X6 :: Universal Color Swap
Oct 26, 2013I know there must be a way to change the colors of multiple objects without doing each one manually. But I am not finding the instruction. Say I have 17 parts of a drawing that are blue, and decide I'd rather have them blue/green.
View 5 Replies View RelatedCorelDRAW Graphics Suite X6 :: (Out Of Memory) While Collect For Output?
Jan 28, 2013I get the "Out of Memory" error when I'm trying to collect for output, tired re installing but the same erorr continues
View 5 Replies View RelatedCorelDRAW Graphics Suite X5 :: Corrupt Files And Out Of Memory Crashing?
Nov 10, 2011From time to time when saving a file the file gets corrupted. When trying to open the file, only a blank page is visible. Trying to open the file as zip says "error in packed file..." This happens several times a day (we are 5 users and this happens to everyone).
The out of memory issue is also a huge problem for us. This happens several times a day, often during printing.
Are Corel taking these issues seriously or don't you care about professional users which are dependent on reliable tools?
3 users at Win7-64, 2 at XP-32. All computers are top notch with all patches/updates installed.
CorelDRAW Graphics Suite X5 :: Memory Usage - Avoid Swapping
Feb 21, 2012we are using a Dell T5500, WIN7, 64bit with 24 GB main memory. Corel X5 seems to use only a small part of it, although we have large files and jobs (e.g. to export to Adobe Illustrator). This takes a long time (> 10 min), where sometimes Corel even writes nothing to the AI file.
CPU usage is medium, memory usually around 2GB, but not larger.
How can we bring Corel to use more memory to be faster and/or in order to avoid swapping else writing nothing into Adobe Illustrator?
CorelDRAW Graphics Suite 12 :: Application Error / The Memory Could Not Be Read
Oct 15, 2007I've got the following error message when I try to open CD file on Windows 2003 using CD 12.
" CORELDRW.EXE - Application Error
The instruction at "0x016ae2df" referenced memory at "0x00000006". The memory could not be "read".
Click on OK to terminate the program "
It's showing when I open .cdr file.Sometimes it is showing from time to time, but on some files it's showing everytime.
CorelDRAW Graphics Suite X5 :: Option To Set Memory Usage Has Gone From Global Options Menu
Apr 29, 2010What to try on my computer to counter the frequent and destructive X5 shut downs that are happening. I've read about this problem in other threads, so I know it's not just me or my system.X5 shuts down many, many times every day. I don't think I've been able to work for 15 minutes straight yet without it crashing.
I am running a fast dual-core Intel, XP Pro SP3, 2 GB RAM, ATI Sapphire/Radeon 1GB card, oodles of hard drive space. I can run the hottest, most demanding games no problem. I run hundreds of other apps with no problem. I had no similar problem with X4 on this machine. I have no similar problem with other Corel apps, either.
X5 crashes still happen after I close down as many memory-resident apps as I can. I can't strip it down much further.I usually have a few (3-4) dockers open, one or two palettes, and my files include several bitmaps which may include transparencies or colour masks. I have about 650 fonts installed.
X5 shuts down on me many times during every work session. Sometimes when I am changing fonts, sometimes when editing bitmaps, sometimes when importing bitmaps, sometimes when applying a transparency. Bang - just shuts down. I can have Corelpaint open editing a bitmap and CD closes underneath it. I can open window to import a file and CD closes as I search the thumbnails. It closes when I click the change page tab.
Doesn't seem to be any specific act or function that closes it - it just shuts down. Gone. No warning. I lose everything since the previous save. Half the time the working file is corrupted, too, so I can't even restore it. I have to keep numerous versions on disk and use save-as with every save to keep just one alive.
I notice that the option to set memory usage has gone from the global options menu. Maybe it's bad memory management and we need that option back? I'd be happy to assign a higher percentage of RAM to X5.
CorelDRAW Graphics Suite X3 :: How To Re-space Multiple Objects
Jul 26, 2011I have a series of images that have been designed - very basic shapes (a straight vertical line with a ball on top in which ascending numbers are placed in each one. So effectively each image is made up of 3 seperate parts and look like numbered lollipops. Each of these images are currently evenly spaced apart and formatted so the text is all properly aligned and sized etc - I would like to be able to copy certain groups of these images and paste them into a new working document which is fine, but I then need to somehow re-space them out to scale once they've been pasted in. So for example i have copied them in and they are 20mm apart to each other (as per my original drawing that i copied from) - is there a way of then altering this spacing so that for example so that they are all 33mm apart but still retail the original formatting properties so they are not stretched etc?
View 11 Replies View RelatedCorelDRAW Graphics Suite X6 :: Work Space Customization
Mar 27, 2012Go to Tools/Options/Workspce/Customization/Commands/Text and drag the Line (Line Spacing) icon on to a toolbar. The Change Document Defaults dialog opens with various options available. If I click on any of the check boxes or the Ok, Cancel, or Help buttons, nothing happens. The only button that works is the Close button (top-right button with the X in it).
View 3 Replies View RelatedCorelDRAW Graphics Suite X5 :: Adjust Space Between 2 Objects
Mar 15, 2012Is it possible.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
CorelDRAW Graphics Suite X4 :: Put Outline Around Number With Space?
Aug 26, 2011number 3.jpg
How would I put an outline around a number with a space between the number and outline?
CorelDRAW Graphics Suite X3 :: Create Text / Some Space And Add Outline
Oct 25, 2011I want to create some text that has a outline but with a little bit of space in between the text and the outline. What is the best way to do this?
Usually, I will create text and add an outline. Then convert the outline to an object and change the color to whatever the background color of the document is. Then I will add an outline to that object (the one that used to be the text outline) and I end up with essentially two outlines.
It usually isn't that difficult but sometimes the text does not cooperate and when I add an outline it has all kind of gaps and points. So I guess I have two questions. why certain texts have those gaps and points when you try to outline them? Also, is there any easier way to make an outline that is not directly against the text like this.
CorelDRAW Graphics Suite 12 :: Fill Empty Space Surrounded By Other Shapes
Aug 16, 2011In Coreldraw 12, I often use combine to end up with a one solid shape with many holes in it. Often I want to add a color inside one of the holes, much like a coloring book, but there is no shape there, it is just empty. What is the quickest way to create a solid that fills that hole exactly?
View 2 Replies View RelatedCorelDRAW Graphics Suite X3 :: How To Space Lines Evenly Along Radius Of Specific Range
Jul 11, 2011I have a radius that is spread between 10 and 40 degrees that I need to evenly space 6 line segments throughout.
What this is for is a property with 5 lots along a curved street. Each lot is the same size and I am trying to draw just the sections that are affected. I have tried using the star feature and reducing it to single lines, but they do not space evenly and getting the line number is very difficult. I have tried dividing the angle range and come up with the correct angle and spacing but this is also an issue. Is there any way to do this without dragging each line separately?
CorelDRAW Graphics Suite X5 :: Drawing Squares - Empty Space Between Borders Is Filled
Apr 23, 2013I have drawn two squares. one is 20mm sq and the other is 15mm sq.
I placed one square inside the boundery of the other and selected NO FILL..Yet when I import the image into my Laser Engraving program, the empty space between the borders of the two squares is FILLED...
How to stop the FILL happening ?????
CorelDRAW Graphics Suite X3 :: Export Text Or Graphics As EPS Files - Vinyl Cutting?
Mar 18, 2012why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
CorelDRAW Graphics Suite X5 :: Dropping Lines Of Text Or Parts Of Graphics?
Dec 1, 2010We are having a big problem with dropping lines of text or parts of graphics. It is happening on 3 different laser systems and 2 different printers.
View 14 Replies View RelatedCorelDRAW Graphics Suite X4 :: Graphics And Text Disappear After Zoom In Or Out Quickly
Sep 5, 2009Often whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.
View 6 Replies View RelatedCorelDRAW Graphics Suite X5 :: Can't Export Large Drawing With Raster Graphics
Jul 21, 2013i´m using CRD since X3 so I think i´m quite experienced with all the crashes and uncompatibilities but now I have a problem which I can´t solve.
I made a graphic project which is quite large (2,6m x 2,0m @ 300dpi) and including raster grahics. The CDR file itself has about 400MB. When I tried to export this graphic to the png or jpg at the current size Corel X5 always crashes. I tried almost everything on many computers but always the same problem.
It looks like the project is too large for export. At this moment I desperately need to export the file to jpg or png at full resolution. Maybe X6 is more stable when exports or I have to simplify the project somehow but...
FILE IS UPLOADED here and I need to have it 2,6m x 2,0m: [URL]
CorelDRAW Graphics Suite X5 :: Import From Illustrator Maintaining Graphics Position And Canvas Size
Nov 9, 2011I have a 900 x 500 px image in Adobe Illustrator, which overlaps a bit the canvas on the left side.
When I open this file with Corel, it adjusts my graphics so that it's centered on the screen. The AI file is centered on another point. Also, the canvas Corel creates is A4 sized. I always have to resize the canvas and then manually adjust the position of my graphics.
Question: How can I save an AI file so that when I open it at Corel, the position and size of the canvas will be exactly the same?
CorelDRAW Graphics Suite X5 :: Entire Suite Freezes On Start Up?
Jul 23, 2011Entire Corel suite freezes on start up - I cannot do anything. Reinstalling also does not work - suddenly buttons on the installer dissapeared - there is no text on them and when I click them nothing happens.
A week ago I have installed service pack 3 and everything worked fine. It has all gone wrong again. And installation of the latest patches does not work anymore.
I am running Windows 7 64-bit and I've got a feeling that is must have something to do with system updates.
CorelDRAW Graphics Suite X5 :: Mixing Vector Graphics And Bitmaps
Mar 14, 2011I often create graphics in CorelDRAW export it and inserting it into my MS Word documents and finally convert my documents to pdf. When it is vector graphics, exporting as EPS works fine: The increase in file size is small and lines are displayed perfect independant of how much you zoom in the final pdf document. When I handle bitmaps, I usually export as JPG (or PNG), which works well too. My problem arise when I have a mixed vector and bitmap image. I have imported a bitmap into CorelDRAW and created some lines on top of it. I want to export it as a whole. If I export as EPS, the final result is fine, but filesize has increased considerable. If I choose to export as jpg, the filesize is fine, but the lines are getting slightly blurry. Is there a way to get the best of both Worlds - resonable filesize and perfect lines? Maybe settings in some dialog??
View 7 Replies View RelatedCorelDRAW Graphics Suite X5 :: Exporting Web Graphics To Correct Size
Dec 1, 2011How on earth do you export bitmaps cropped to the size of the canvas? This seems like the simplest functionality ever but i can't get it to work. For example, I am designing an advert for use online. It needs to be 600px wide x 150px high. I may want to use a background image or a photo that when placed goes beyond the edge of the canvas. Logic dictates i would only want to export the canvas with a web image (otherwise why would i have set an exact number of pixels.) However, Corel insists on exporting everything on the canvas and desktop. Surely it should allow us to choose the bounding area of the exported bitmap.
Just to clarify what I mean, i've included a screen shot showing and example original graphic and the export result. I'm sure there must be an easy way to do this. If it's one like this i can crop it easily, but sometimes a print customer will ask me to send them, for example, a 32pp booklet we have designed for them with each page as a JPG and to crop each one manually is a right pain.
CorelDRAW Graphics Suite X5 :: Missing Text Or Graphics When Printing?
May 9, 2011X5 Recently have begun missing parts of print out. Tried to duplicate but appears completely random.
Output to both Full colour laser and Wide Format printers will miss either text or part of objects. Today printed the text but not the text effects. Initially closed and reopened, rebooted, However this has become a now daily feature so regardless tried reprint from the same screen so next print has everything included.
Very costly and time consuming - print preview shows all correct but output is not the same.
Running Win 7 64bit 8GB Ram
CorelDRAW Graphics Suite X6 :: Opening AI File That Have Linked Graphics
Jun 19, 2013I have some Ai files that I need to open in X6 but they use linked images which I have, but when opening in CorelDraw all I get is the basic Ai stuff but not the linked images, is there an easy way to open the Ai file and see it as it was intended?
As a sub note I can't go back to the supplier of the Ai file to make any changes.
CorelDRAW Graphics Suite X4 :: Links To Graphics Are Broken When Using Help File
Oct 18, 2012I just used the help file for the first time in ages and noticed all the links to the graphics are broken hence no diagrams etc. I tried to search out where they are usually stored and it gives some weird Address under properties. It's a vba so suppose it's a database? How do I restore the links without having to do a re-install?
As to the pen: How do you stop the annoying over-the-top predictive curve that happens past the node in the next section after a long drag to form the first curve. i.e. you simply want to draw a straight line after dragging out a curved section previously and you get this unmanageable curve to deal with ?
CorelDRAW Graphics Suite X3 :: Blank Blocks Behind Text And Graphics?
Jan 2, 201302012013010.jpg
Blank Blocks behind text and graphics
CorelDRAW Graphics Suite X5 :: Error While Installation - No Graphics Shown
Dec 6, 2013After a "format c:" i´m trying to reinstall my corel x5. But after starting the install-progress i only can see this:
What does it mean? I can´t imagine where this comes from?!? How to handle this fault?
CorelDRAW Graphics Suite X5 :: Dual Graphics Cards
May 22, 2011I am building a new desktop and am thinking about using dual graphics cards for my work in Corel X5. Ive seen nothing in technical specs or min requirements that even alludes to the program being able to take advantage of an SLI configuration (evga gtx 465 superclocked with 1gb ddr5).
View 5 Replies View Related