I've got the following error message when I try to open CD file on Windows 2003 using CD 12.
" CORELDRW.EXE - Application Error
The instruction at "0x016ae2df" referenced memory at "0x00000006". The memory could not be "read".
Click on OK to terminate the program "
It's showing when I open .cdr file.Sometimes it is showing from time to time, but on some files it's showing everytime.
I do have problem with my newly installed CorelDraw X5. Before X5 we used Corel 12 in our company.
I have project file (150 MB) with lots of text, bitmaps, vectors - about 100 pages. File opens but I can't save it. I always get OUT OF MEMORY error. I even tried to divide this file into 2 smaller parts but still doesn't work.
What I noticed - Corel X5 after clean start (without opened project) takes about 80MB of RAM in task manager. When I open project usage changes from 80MB to 1,2GB. While saving it takes 1,6GB of RAM and it crashes.
To compare - Corel 12 and after opening same project file Corel 12 takes much less of memory - about 770MB and it works without problem.
Where from comes this memory usage difference?
My PC:
Windows 7 - 32bit
4GB of RAM
Intel Core2Duo 2 x 3.0GHz
700GB free space on drive C:
I am using Adobe Photoshop CS4 Extended Student Edition. My computer is Windows XPI continue to get the error Photoshop exe Aplication ErrorInstructions at oxofa92c5b sometimes is states oxofc42c5breference memory oxoooooo28 Memory could not be read Cancel or debug. it shuts down. no matter what you click. It does this after I get the picture open and when I click on different tools. This is newly installed on my computer and newly bought program.
View 9 Replies View RelatedI've installed Corel Draw graphics suite x3. When i'm trying to run the application, it says "To start this application for the first time or to activate, log in using an administrator-level account. From then on, you can use any user account to start this application".
View 1 Replies View RelatedI'm having a problem with my Corel x6, every time I try to start the application it stuck for a minute or so on the splash screen and then I get error 1 (Try to restarting your computer and then restarting the program).
View 6 Replies View Relatedcomplete Corel X4 uninstall 3 times already .... even went so far as to reboot the registry to a date before I installed Corel X4 Suite to no avail.
The program has had no issues until the last 2 weeks. The actual issue I am having is Paint works fine as a separate entity however when I try to edit a bitmap from within X4 an error pops up telling me "Failed to launch server application" This is a major PITB as I own a graphics company and this is causing no end of problems
I am using corel x3 a long time but never, never had this kind of problem. When i work in corel enviorenment after i have finished my work i go to save my work. But then is the problem It Saves the file with Large Memory on it. let's say if the file normally would be 200 K, now it saves with 3 MB. And if i import some other files in my work then the saved file will be even bigger. If i Delete the files that were imported The Saved File will be Again the same SIZE ! Even if a take one part of the file, let's say if i import only one small text and put it in another file and save it like that, the saved file will be 2 MB. I had a lots of problems, i had saved files on this way with 23-24 MB and when i open them it takes like forever. When you look that file in corel it has nohing in it, absolutely nothing that should be 24 MB. But all of my important work is in that files how to make all things back to normal again,
View 9 Replies View RelatedI get the "Out of Memory" error when I'm trying to collect for output, tired re installing but the same erorr continues
View 5 Replies View Relatedmem-swap.jpg
I noticed these two options in the status bar . what are they... how they work. i dragged into my toolbar and showing that memory allocated and swap space.
I'm writing my first VBA apps in Corel Draw X5. I want to modify the standard FileCOnverter .GMS file that came with X5. Every time I try and save changes I'm advised that the file is Read Only. I've also copied the original .GMS file, but I get the same error messages on the new file.
Next I tried to create a new .GMS file by creating a .TXT file and renaming the extension to a .GMS folder (as all of the user guides explain to do). Once again the VBA editer will not allow me to make changes within the file, although it did allow me to create a Macro.
I'm also interested if I can have the .GMS files in a directory other than the Corel Draw GMS directory. It is bad programming practice to save data files in a Program File directory.
From time to time when saving a file the file gets corrupted. When trying to open the file, only a blank page is visible. Trying to open the file as zip says "error in packed file..." This happens several times a day (we are 5 users and this happens to everyone).
The out of memory issue is also a huge problem for us. This happens several times a day, often during printing.
Are Corel taking these issues seriously or don't you care about professional users which are dependent on reliable tools?
3 users at Win7-64, 2 at XP-32. All computers are top notch with all patches/updates installed.
we are using a Dell T5500, WIN7, 64bit with 24 GB main memory. Corel X5 seems to use only a small part of it, although we have large files and jobs (e.g. to export to Adobe Illustrator). This takes a long time (> 10 min), where sometimes Corel even writes nothing to the AI file.
CPU usage is medium, memory usually around 2GB, but not larger.
How can we bring Corel to use more memory to be faster and/or in order to avoid swapping else writing nothing into Adobe Illustrator?
this is not for the faint harted as it involves editing the Registry file in Windows.The location of the program list that shows up in the Launcher is:HKEY_Local_MachineSoftwareCorelAppLauncherOnce there make a copy of the key by exporting it .. JUST In case ...Right click in the right pane to create a NEW .. String ValueGive it the name of the file you want in the drop down list in Corel .. Then right click it to modify the value. Paste the location of the program you want to Open in the Value data. I put in ThumbView (a StTex program that I use for the fact it give Corel Thumbnails that are the best I have seen) I also add X-Fonter as once more it is the best Font Manager I have come across. I also deleted the barcode program.
The programs show up in Corel by the time they were put into the registry not the order shown in it.
it is possible to change the background color of the application window ?
I would like the whole area outside the drawing window (the drawing page) to be grey, so that it can be clearly distiinguished from the actual drawing page, which is white, with a shadow line around the drawing page.
Is it possible apply a shortcut to BFN in Application Launcher. If so, how do I do that?
View 2 Replies View RelatedWhen I try and launch Corel Draw x6 in 32 or 64 bit mode I get this error
The application was unable to start correctly (0X0000142) . Click ok to close application. Try this as a trial first before I buy I purchased x3 and x4 they wont work on windows 7. Cant get it to launch
Running:
windows 7
64 bit
8 gig memory
I have a partitioned mac that i am running windows 7 on. I've had no problems with corel and all of a sudden when I go to open the program it won't open past "Creating Application Environment" and I get an error message stating problem open corel.
I have tried the f8 thing, no luck, I have tried the uninstall reinstall, no luck, I've tried the run registry, no parasite.
Every time I open a new file a new Corel Draw application opens. Is there a setting I can change to have the files open in the same application?
View 1 Replies View RelatedWhat to try on my computer to counter the frequent and destructive X5 shut downs that are happening. I've read about this problem in other threads, so I know it's not just me or my system.X5 shuts down many, many times every day. I don't think I've been able to work for 15 minutes straight yet without it crashing.
I am running a fast dual-core Intel, XP Pro SP3, 2 GB RAM, ATI Sapphire/Radeon 1GB card, oodles of hard drive space. I can run the hottest, most demanding games no problem. I run hundreds of other apps with no problem. I had no similar problem with X4 on this machine. I have no similar problem with other Corel apps, either.
X5 crashes still happen after I close down as many memory-resident apps as I can. I can't strip it down much further.I usually have a few (3-4) dockers open, one or two palettes, and my files include several bitmaps which may include transparencies or colour masks. I have about 650 fonts installed.
X5 shuts down on me many times during every work session. Sometimes when I am changing fonts, sometimes when editing bitmaps, sometimes when importing bitmaps, sometimes when applying a transparency. Bang - just shuts down. I can have Corelpaint open editing a bitmap and CD closes underneath it. I can open window to import a file and CD closes as I search the thumbnails. It closes when I click the change page tab.
Doesn't seem to be any specific act or function that closes it - it just shuts down. Gone. No warning. I lose everything since the previous save. Half the time the working file is corrupted, too, so I can't even restore it. I have to keep numerous versions on disk and use save-as with every save to keep just one alive.
I notice that the option to set memory usage has gone from the global options menu. Maybe it's bad memory management and we need that option back? I'd be happy to assign a higher percentage of RAM to X5.
i have downloaded the trial version to test ps.when i click save it exits Photoshop..and after about 15 minutes a error comes up and it says "memory could not read"
View 5 Replies View Relatedi had CS3 running fine for as long as i can remember.. (on winxp pro sp3 32bit)
then all of a sudden today when i try to start it.. it opens and the splash screen comes up, then when it gets to 'initializing palettes' i get an error that says etc etc memory cannot be read...
i uninstalled, ran the cleaner, deleted all cs3 folders in docs&settings.. reinstalled.. same problem ...
Using X5 suite. Just installed Windows 7 on my stand alone system. Now when I make a change to a file and attempt to resave (Save) it, the message box says the file is "Read Only" and asks me to save under another name.
View 5 Replies View RelatedI recently installed CS4 and when I quit Photoshop CS4 I get a "DDE Server... memory could not be 'read'" error. I've looked all over the forums for solutions to this, tried deleting my preferences file, reinstalling CS4, and fiddling with performance options, but nothing seems to make a change. I never had much trouble with CS2 or CS3.
View 9 Replies View RelatedIn CorelDRAW 12 I created a design with a few bevel effects on simple polygons. I now have CorelDRAW X5 and need to make some minor adjustments to these bevels.
But I can't seem to bring upp the bevel properties anyway and of course canät edit them either.
How can I at least SEE what properties/params were used for those bevels?
It's OK if I can't edit them (even if that would be preferable). As long as I can get to see the properties that were used, I can remove the old ones and create new ones with the same properties (with the required adjustments).
I note that in the object manager, the old bevels appear as "Bevel group" (but in Swedish), while new bevels appear as "Bevel", and the little icon in the object tree is different. The old ones have an icon that would seem better suited for an extrude.
While working on a complicated project involving copying and pasting into PSCS4 from several applications I received this error and Photoshop closed down with loss of my work.
I'm in Windows XP Pro SP3 and using a workstation with 2GB of error correcting memory. I had no such problems in PS3 and other applications work fine.
After a "format c:" i´m trying to reinstall my corel x5. But after starting the install-progress i only can see this:
What does it mean? I can´t imagine where this comes from?!? How to handle this fault?
i had installed the coreldraw x6 and every thing went right until i open it when the instillation finished , and showed me error 998 !! and i had searched for an answer and i found an answer but didn't work . the answer was : install regcure pro and fix all problem but didn't work ...
View 11 Replies View Relatedwhen i install corel draw its gives me an error that your setup file has an error it gives crc error and ask me to ignore or abort when i ignore its continue extraction butt when its extract then on installation its give errrors. i install trail version i download from different sites like from corel or downloadcnet.com but its give me same error when extraction
View 3 Replies View RelatedAfter upgrading ATI graphics card driver, corel X5 wont launch at all neither will Paint.
ive tried re installations , repairs, un installing ATI driver, re installing corel, applying serv pack 1 and 2.
I have a problem with cutting the design, it actually prints it but not cut it. The error displays : Cut Data File Creation Error..
I'm using Corel Draw Graphics Suite X6, Raster Link, to print & cut using Mimaki CJV30-60..
What does the error actually mean & what do I need to do to resolve this?
I have downloaded the trial version of Paintshop Pro Ultimate X5 three times ans still get the above cryptic error.I am running Windows 7 64bit.
View 1 Replies View Related