CorelDRAW Graphics Suite X6 :: Will Not Save To AI Files
Mar 4, 2013
I have tried on numerous occasions to save my corel draw files to adobe illustrator but once you try to save a page in corel to AI the program locks up in the background so that you can't close it and when I try to enter my new AI file into my internet "dropbox" so that my web-designer can use the files, I am just informed that copying the file into dropbox is not possible as the file is currently open in Corel Draw?
I have tried to get the hot-fix/updated patch for Corel X6 however that is an even worse nightmare with all the swings and roundabouts Corel trys to get you to go on before you can get a simple update.
My web designer is waiting to start work on my new website but I just can not get my design work to him.
View 9 Replies
ADVERTISEMENT
Jan 2, 2012
I'm using CorelDraw X5 with Windows 7. When I go to save a file often it won't save unless I repeat the save file command several times. Once I do get it saved the file then shows to be locked.
View 2 Replies
View Related
Dec 19, 2011
I just replaced the hard drive in my laptop. I have installed Coreldraw 12 again and it opens and works fine.
Problem is when I create and save a file. The file appears on the desktop ( if that is where I save it ) but it has an odd icon with a red A on the bottom corner. If I click on it, I get a "not a valid win32 application" message.
However if I open Corel12 and import the file, it appears to be fine.
View 5 Replies
View Related
May 30, 2012
Corel has suddenly started corrupting any new files I save. I'll make a file, save it, then when I open it... It goes through the motions of opening it, but when it is done nothing opens. There is nothing there.
If I change the file to a zip file and open the riffDATA.cdr file that works, but this CAN'T be my solution. Could a virus have corrupted Corel?
View 10 Replies
View Related
Jan 23, 2012
I need to save files incremental when export,that is a fragment from my script:
ActiveLayer.Shapes(98).CreateSelection Set expopt = New StructExportOptions expopt.UseColorProfile = False Set expflt = ActiveDocument.ExportEx("F:...�1.plt", cdrHPGL, cdrSelection, expopt) expflt.Finish
need to change 01.* file name with a n+1 function, is posible to do that in VB?
View 4 Replies
View Related
Apr 23, 2012
I have recently installed Corel X6 and have found it to be painfully slow when opening files. At first I had thought it might be a network issue so I copied the file to a local drive and experienced the same problem.
The file is only 819Kb but it takes about 3 minutes to open the file. When I first select the file in the File Open dialogue window Corel just hangs for about 1 minute. It finally responds then takes a further 2 minutes to process and open the file.
I have turned off my antivirus software as I thought this might be a file scanning issue but still the same result.
View 14 Replies
View Related
Aug 2, 2011
I use CorelDRAW on a daily basis and recently the program takes a lot of time to open/close/save my files, or sometimes it'll simply freeze.
View 6 Replies
View Related
Aug 17, 2011
I have multiple files open in Corel every day, and then, at the end of the day I have to run to get my lift (never at the same time!) and I would love a way to save all my files with just a click of a button.
I know Dreamweaver had this function - not sure if it still has, but I would love for Corel to have this so I don't have to scroll through all my open files and save them! If the file is not named it can pop up the save as box as usual and leave it open till the next day.
I have to save before I go, as we have very unreliable power and the UPS systems are not reliable either.
View 2 Replies
View Related
Dec 28, 2011
I was facing problems with X5 soon after installing it, it actually doesn't installs properly. Somehow i have to End Process of installation and though find X5 in my Start menu of Windows XP SP2. Well the actual problem started when i recently tried to publish PDF for one of my client's brochure of 17 pages, X5 closes all of a sudden and i have to restart the whole process. At times it creates a PDF which then has errors and Acrobat Reader don't read it.At times X5 even gives Error while saving files. Then have to click Save till it actually saves the file.I uninstalled X5 thinking, there could be some corrupted files and re-installed, but all in vain..
View 1 Replies
View Related
Mar 19, 2009
Temp. Drive Full, File Copy Error?I got this error in CDR XIII. I have checked my Temp Drive Folder in C: I have sufficient space in hard drive but this error occuring again & again & I could not save my hard working graphic files.
View 9 Replies
View Related
Aug 30, 2011
I am having trouble with CorelDraw X5 SP3 in Windows 7-64 Professional. When I am in CorelDraw or in PhotoPaint, and try to Export as a JPG or PNG file, I get the dialog box showing the picture and details on the right side. But then when I click OK, NO File is saved. This is frustrating. So I go back and try it again and no file saved. So then I try a PDF save and it does it. Then I go back and try to get my PNG saved and it may or may not save it. Finally, I fiddle with it and I can get the FILE SAVED. What a hassle. What is blocking CorelDraw from saving JPG and PNG to finish their generation?
View 12 Replies
View Related
Mar 18, 2012
why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
View 7 Replies
View Related
Jan 30, 2012
I have a CDR project I am working on. As I work, I occasionally click the "save" icon to save the work. When I am finished for the time being, I am unable to click on either the "X" or "Exit". The program doesn't respond, and I have to go to the Windows Task Manager to shut down CorelDraw. Because of this, the work is not saved. I have Windows 7, and I also have all of the X5 updates installed.
View 5 Replies
View Related
Nov 9, 2011
I have done something to my X5 or X4 document that has disabled the ability to publish to PDF. What I could have done that would have disabled this? I just have text and graphics, on a poster sized document. it is one page.
View 2 Replies
View Related
Apr 2, 2013
"Save as", "cut" and some other funtions are not available within my CorelDraw. what could be the cause for this behavior and how I could get rid of it.
View 5 Replies
View Related
Nov 18, 2011
Running CorelX5 on windows 7 - On my work computer when I have a file open and hit the save button I'm getting the message "can not save, file is open or being used by other program". I have to save as a different name. I assume another program is to blame and is associated with .cdr.
View 2 Replies
View Related
Sep 9, 2011
Why the Autobackup in X5 is older than the last save. I wonder how many people are losing work because they save over their original file after a crash.
View 3 Replies
View Related
Apr 27, 2011
I am using CorelDraw X5 and my system is Windows 7 and is a 64 bit.
Most of the time when I am drawing and go to save my file, CorelDraw X5 will freeze up (not responding) and then crash. Most of the time, I can go and restart Corel, open my file and it will have saved where I wanted it to; but sometimes it will cause me to have to use the auto-backup or just the back up file.
View 1 Replies
View Related
Aug 7, 2013
X3 - I use X4 at work with no problems but at home I have X3. I set my workspace the way I want it and all my presets the way I want. I hit tools/save stings as default. I then save my workspace as todays date. Close corel and reopen. It starts with the defaults every time! I have to manually choose my workspace and even after doing so my settings have reverted back to default i.e. text to be point not inches like I chose etc.
View 3 Replies
View Related
Apr 15, 2011
I am trying to save a CorelDraw X5 file in Adobe Illustrator, so I can bring it into Illustrator CS4 to work on it in Illustrator.
It will only save in CDR format. Whatever different file format I try I get a message "No object to Print, Export, or Save" I originally grouped it and saved it in CDR.
View 16 Replies
View Related
Apr 8, 2013
I create a pdf page and save. when i add a second page to the document and save, the second page is not saved in the pdf. how can I get the whole document to save in one pdf file?
View 4 Replies
View Related
Apr 17, 2013
I am using Corel X5 and need to save back to version 10 or 12. Even though I change the settings when I "save as" the file remains an X5. Unfortunately the engraving company I use cannot open the X5.
View 3 Replies
View Related
Apr 5, 2012
Is there a way that coreldraw x5 by default saves as to an older version e.g. 12, 13,. [ so we don't have to specially go to the save as dialog box] automatically just like there's an option in AutoCAD?
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
View 4 Replies
View Related
Sep 22, 2009
When you save a PDF preset it says 'security settings are not saved with PDF preset' is there anyway to change this, i want to save the security setting so i don't have to set a password each time i save it, i make dozens of PDF proofs a day and its a pain having to set it every time i publish to PDF.
View 2 Replies
View Related
Jun 9, 2011
Client supplies me with word document, I make a PDF from it and then from Acrobat create an ESP file, this is done as an eps file is much less likely to cause probs then importing a PDF, I then print from the Coreldraw file with the EPS pages no problem. The problem then arises when I have to then create a PDF file from COreldraw for the client - any EPS files in the document do not appear in the PDF - so there lies the problem.I cannot alway directly import a PDF file (often screws up) even if I save fonts as outlines. Saving as EPS overcomes most/all issues.
View 3 Replies
View Related
Oct 28, 2013
Resetting the User Setting with the the F8 key didn't solve the problem. Once the user gets caught up on a couple projects I'll try to update the version to SP3 and the hotfix.
View 14 Replies
View Related
May 19, 2008
How to save as coreldraw file in .tiff format
View 6 Replies
View Related
May 9, 2011
I have a link [URL]
would like to save this item into the coreldraw x5 as a texture library item.
View 5 Replies
View Related
Feb 14, 2012
Some how I'm stuck on this issue; I need to save/export (pdf/jpg) a few pages which includes content outside page border. It seems to be impossible to save page content - inside the page border - only.....?
I can't remember having problem with this before....?
Using CorelDraw X5 15.2
View 5 Replies
View Related
Aug 16, 2013
When i set more than 1 copy in my print window my HP ColorlaserJet 5550 printer output 1 OK and status side saying: Cannot save job in printer.
Printdriver new updated (PCL6 );
firmware new updated:
View 2 Replies
View Related
May 3, 2012
I just got X6. I can't get my default color mode to save. I go to options, document,general and change it from CMYK to RGB click document to save styles for all but it doesn't save it. When I export I have to manually change CMYK to RGB and the resolution every time. In other versions once I set it it was always there. Am I missing a setting somewhere?
View 2 Replies
View Related
