CorelDRAW Graphics Suite X5 :: How To Save All Opened Files With One Click Of Button
Aug 17, 2011
I have multiple files open in Corel every day, and then, at the end of the day I have to run to get my lift (never at the same time!) and I would love a way to save all my files with just a click of a button.
I know Dreamweaver had this function - not sure if it still has, but I would love for Corel to have this so I don't have to scroll through all my open files and save them! If the file is not named it can pop up the save as box as usual and leave it open till the next day.
I have to save before I go, as we have very unreliable power and the UPS systems are not reliable either.
I've upgraded to CorelDraw X6 but I need the files I make to be openable in Coreldraw 10. When saving I use the drop down box and choose the option for 10 and if they are opened again in X6 before they are opened in 10 they are fine, but when these files are opened in 10 they crash and the file gets wiped (when opened again it's just a blank page).
A not so obvious box that needs ticking? An option I have missed somewhere?
Is it because the version i have is 64bit? Or is it just not possible to downsave files properly anymore, is 10 just too old now?
I'm using CorelDraw X5 with Windows 7. When I go to save a file often it won't save unless I repeat the save file command several times. Once I do get it saved the file then shows to be locked.
I have tried on numerous occasions to save my corel draw files to adobe illustrator but once you try to save a page in corel to AI the program locks up in the background so that you can't close it and when I try to enter my new AI file into my internet "dropbox" so that my web-designer can use the files, I am just informed that copying the file into dropbox is not possible as the file is currently open in Corel Draw?
I have tried to get the hot-fix/updated patch for Corel X6 however that is an even worse nightmare with all the swings and roundabouts Corel trys to get you to go on before you can get a simple update.
My web designer is waiting to start work on my new website but I just can not get my design work to him.
I just replaced the hard drive in my laptop. I have installed Coreldraw 12 again and it opens and works fine.
Problem is when I create and save a file. The file appears on the desktop ( if that is where I save it ) but it has an odd icon with a red A on the bottom corner. If I click on it, I get a "not a valid win32 application" message.
However if I open Corel12 and import the file, it appears to be fine.
Corel has suddenly started corrupting any new files I save. I'll make a file, save it, then when I open it... It goes through the motions of opening it, but when it is done nothing opens. There is nothing there.
If I change the file to a zip file and open the riffDATA.cdr file that works, but this CAN'T be my solution. Could a virus have corrupted Corel?
I have recently installed Corel X6 and have found it to be painfully slow when opening files. At first I had thought it might be a network issue so I copied the file to a local drive and experienced the same problem.
The file is only 819Kb but it takes about 3 minutes to open the file. When I first select the file in the File Open dialogue window Corel just hangs for about 1 minute. It finally responds then takes a further 2 minutes to process and open the file.
I have turned off my antivirus software as I thought this might be a file scanning issue but still the same result.
I was facing problems with X5 soon after installing it, it actually doesn't installs properly. Somehow i have to End Process of installation and though find X5 in my Start menu of Windows XP SP2. Well the actual problem started when i recently tried to publish PDF for one of my client's brochure of 17 pages, X5 closes all of a sudden and i have to restart the whole process. At times it creates a PDF which then has errors and Acrobat Reader don't read it.At times X5 even gives Error while saving files. Then have to click Save till it actually saves the file.I uninstalled X5 thinking, there could be some corrupted files and re-installed, but all in vain..
Temp. Drive Full, File Copy Error?I got this error in CDR XIII. I have checked my Temp Drive Folder in C: I have sufficient space in hard drive but this error occuring again & again & I could not save my hard working graphic files.
We used to use version 4 at work and loads of images drawn, my boss has converted to version 12 but when we open the drawings now all the text is in the wrong place and too big etc.
I have been given the task of fixing them all and wondered if there was an easy fix rather than clicking on each text box and changing each bit one by one, sitting with my fingers crossed.
Can the items in the Contents Folder (e.g. Frames, pictures, etc.) be opened directly into Photoshop CS6 without first being opened in CorelDRAW X6. I have both programs, and it would be great if I had access to those objects whenever I'm using Photoshop.
When I click File the drop down menue at the bottom has five entries for recent jobs. The most current is a file I worked on three or four days ago. How do you make Corel remember what was the last job opened?
I'm perfectly happy with the TrueType font (BankGothic Md BT), but all the style settings change to the T1 equivalent every time I close, and when I open the file again the T1 text does not show up. I can go through and reset all the styles, then re-apply them, but it wastes a lot of time.
With X4 I can right click a piece of text - with pick tool - and drag the selected text to an open area and the text is duplicated. With X5 this does not work - text is locked. The only way to duplicate is to copy / paste. Is there a setting that needs to be reset.
I need to use CorelDraw X5 the bigger the pain in the neck the issue becomes.
The tabket is a Wacom Intuos 3 an my pen is set up to have a right click for the lower side button, double click for the upper side button and single click for the nib. In all applications and Windows this works as expected but as soon as I run X5 I lose the right click and it takes several minutes to return after I have quit X5.
While using CorelDraw the only way to get a right click is to hold down the nib to bring up a pop up menu.
Is there a setting in the tablet driver (or CorelDraw?) that will stop this happening?
And in the 157 page Macro PDF (really, did it need to be this long? How about an easy-command sheet), it says you can use the key command Ctrl+Shift+R to start recording... Well, that brings up the ruler.
I use Macros a lot in Excel (I record the commands that I want, then tweak in the editor), so I get how they are supposed to work - but I'm no programmer, and without the ability to record, I'm completely handcuffed. This really shouldn't be 1% as difficult as it has been
I select an object, then I select the Relative to object button:in the Property Bar, the X and Y aren't in 0.0 ".I have to deselect and reselect again the object and after that X and Y are ok.Same thing if I deactivate the Relative to object button:the X and Y show me 0.0 ".I have to deselect and reselect again the object and after that X and Y show me the real page's coordinate.
When I select a PowerClip, I understand that a mini button bar should appear somewhere, which would allow me to do a number of things with the said clip. I don't see any floating 4-button mini bar?
I was able to re-size the content by going to the top menu ... but this mini- 4-button bar that apparently should appear whenever I hover over a PowerClip object is doesn't show up anywhere.
I'm working on a drawing of an airplane, it has lots and lots of objects. I need to change the color of a bunch of these objects without affecting their stack order.
In a simple example, the left wing and the right wing need to be blue, but the fuselage in between them needs to stay white. If I group the wings, it moves them both on top of the body.
Is there any way to re-color all my airplane parts with one click without moving them all to the front?
I seem to have lost the functionallity of double-clicking on an image placed in CDR X5 to automatically edit in Photopaint. The checkbox in tools/options/edit is checked and photopaint can certainly be opened in the Application Launcher but double-click does nothing.
I am using CorelDraw 12, and recently when I try to drag a drawing, I do a left click and drag. But in doing so, depending on how far I move the object, and how long I hold the left click down, it will just continue making duplicate copies of my object. So as I drag the object, it is also copying. I have had to restart my computer to get it to stop, but this is getting old.
how to disable the drag copyiing? Everywhere I have looked, I find that people are right-clicking, so to clarify, this is a left click issue with my mouse.
I would like to know if some users have the same problem : when I vectorize manually a bitmap with the polyline tool of CorelDraw X6, sometimes I have two nodes very close (I don't understand why because I do one click with my mouse...). I change my mouse without improvement.Do you know a macro to clean my polylines and to transform the "double" nodes in a single node (adjusting the gap distance) ? The reduce nodes feature in CorelDraw is not nice to do that.