I select an object, then I select the Relative to object button:in the Property Bar, the X and Y aren't in 0.0 ".I have to deselect and reselect again the object and after that X and Y are ok.Same thing if I deactivate the Relative to object button:the X and Y show me 0.0 ".I have to deselect and reselect again the object and after that X and Y show me the real page's coordinate.
View 2 RepliesWhen I select a PowerClip, I understand that a mini button bar should appear somewhere, which would allow me to do a number of things with the said clip. I don't see any floating 4-button mini bar?
I was able to re-size the content by going to the top menu ... but this mini- 4-button bar that apparently should appear whenever I hover over a PowerClip object is doesn't show up anywhere.
have to select an object under an artistic media brush object. i try hold down alt key when select the object under the artistic media object but it select the second object
View 2 Replies View Relatedis it possible to display dimensions when you select the object (Appeared inside the object ).
As because i have to look for the property bar again and again for the dimensions since my eyes are soring as it appears in very less size. If it appears the inside the object with appealing big size, then it could be easier for the user to note the size instantly despite of observing the property bar.
I know how to change this in illustrator is it possible in draw?
I want to be able to specify the line weight of a path to be either centred on the path or inside/outside the path. How do I do this?
And in the 157 page Macro PDF (really, did it need to be this long? How about an easy-command sheet), it says you can use the key command Ctrl+Shift+R to start recording... Well, that brings up the ruler.
I use Macros a lot in Excel (I record the commands that I want, then tweak in the editor), so I get how they are supposed to work - but I'm no programmer, and without the ability to record, I'm completely handcuffed. This really shouldn't be 1% as difficult as it has been
I have seen a reference to the auto close gaps button on the toolbar of CorelDraw.I need something like that, because whatever I do I cannot fill my lineart with the smartfill tool, even though I have closed all the gaps, as far as i can tell.
I am wondering if there is a problem with my Coreldraw X5 Software.I am using it on an iMac with Parallels.
Is it possible to assign a "grab" command to the button on the Wacom Intous 4 pen?
At the moment in Painter 12 and Artrage, if I hold down the button closest to the tip on the pen, then press the pen to the pad and drag, it will grab the canvas and allow me to move it around the screen. I cannot figure out how to set this up in Corel Draw X5
btw, its specifically Draw, not Photo Paint that I want to set this up in
I have multiple files open in Corel every day, and then, at the end of the day I have to run to get my lift (never at the same time!) and I would love a way to save all my files with just a click of a button.
I know Dreamweaver had this function - not sure if it still has, but I would love for Corel to have this so I don't have to scroll through all my open files and save them! If the file is not named it can pop up the save as box as usual and leave it open till the next day.
I have to save before I go, as we have very unreliable power and the UPS systems are not reliable either.
I cannot access the options button on the tools menu. It pops up error message that says Required resource unavailable. Then the program locks up and I have to restart the computer.
View 4 Replies View RelatedIs there a way to exclude single attributes from being defined in a object style? As example: i want to define an outline that does not change width of the objects, but everything else.
There is a small tick box right of every attribute with help text "None this object attribute is not defined by a custom style" but i can not mark it. My feeling is, that i need to switch on this tick box to get the result i need, but i can not. When i click on it, it just gives me a greyed out "Revert". When i try to make child styles, there is a way to break the connection to parent style with these tick boxes, but no luck.
Is it a bug? I tried it with X6, X6.1 and X6.2
I have a circle which is blended.
In the circle is some text, rounded - not circle text, it is placed on top rather than typed in the circle directly.
I need to edit the text and it won't let me select it! No matter how far I zoom in to make sure I'm clicking the text, the circle gets selected and the blend tool opens.
They are not grouped or anything. This has happened before many times and with much persistance I get there eventually - but is there a much faster way?
I have an object that I would like to create an inside contour. Just 4 inside contours. However, how can I pick what colors I want for the individual contours?
View 5 Replies View RelatedAlthough I select inside an outline box, the outline box always seems to select. how to disable this?
View 3 Replies View RelatedI can't seem to select more than one text object at a time.....
I will select a paragraph or artistic text object, press and hold shift, and then continue selecting text objects. Nothing happens.... well, it seems to be 'thinking' but nothing ever happens until I release the shift key and then only the last object selected gets highlited.
issue with selecting and then moving an object in Photo Paint? I can hover and get the object name, and then select but when I go to move the object PPT selects and moves an entirely different object. I have held down Ctrl, Alt etc. to no avail. Bigger objects are easier since there is more to grab on to but smaller objects are a pain.
View 1 Replies View Relatedmacro that would select all text of specific color (white) and delete it from the page
View 1 Replies View RelatedI need to find a way to cut the shape of one object out of another object. In the above photo I need to be able to print the black crosses without the printer printing the white ink under them (you can see where the black ink is not adhering to the white ink very well).
View 11 Replies View RelatedI'm using corel draw X5, I can't move object if I select "Traditional CorelDRAW" option for ctrl/shift keys, under Pick Tool menu in options window.
If I choose "Windows Standard", I'll be able to move the objects. But I don't like this behavior, because the way it draws new objects, anchoring them in center, instead of upper left corner.
This bug started just after I change this option, "just for curiosity". I wish I never discovered it. How can I solve it? I want to set ctrl / shift behavior to "Traditional CorelDraw" AND be able to move objects.
Is there a way to select objects like selecting all rectangles filled with red colour on the current page only. The find objects is not good for current page only. it works for whole document..so, any option?
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
I use everything keep them into the powerlclip and i have selected some of the powerclips and wanted to delete all the inside elements only. How to delete all the contents in the powerclip at once despite of going inside and deleting one after the other.
View 2 Replies View RelatedWhen i use margue select i get the blue dotted line but it disapears when i let go of the mouse and nothing is selected, this happens no mater what i'm trying to select. Do i not understanding how it works?
Second dumb question.
I have hit or miss luck with the weld feature some times it works and other times it simply will not work. I'm trying to make a small metal sign and need solid numbers (not Stencil) I draw a rectangle and add text above it and move it down to the top of the rectangle and select both and hit weld, some times it works and some times it doesn't. I have also tried to weld text to a 2 point line and cant do that at all, I suspect the 2 poing line is considered a demensional line so that may be my problem there. I have spent the greater part of a day trying to figue out thes two problems I have watched Graphics unleshed and read all i can find and still haven't figured out if it is me or the program. I have the problem with any of the fonts that come with X5.
Just wondering if I'm missing something when I select the crop tool to remove a section of a image. Is there any way to move the marquee around as if it was a square converted to curves...just move the handles to say a triangle? I know I can powerclip to any curve design I can create..it just looks as if you can use the handles to flip, rotate, etc..
Windows 7 64 bit, Intel Xeon 3.30GHz, 32GB memory, ATI FirePro V4800, (1)10,000 Velosirapptor internal HD, (1) internal 1TB HD, (1) 500GB external HD (2) external 3TB HDs, (2) HP z6200 printers, (1) OKI 9650 printer (1) Roland Camm1 Pro vinyl cutter
I need to measure the circumference around the outside edge of the cut out letters.
View 5 Replies View RelatedI have a logo which appears in the footers of all of our technical manuals. Word recognizes it as a picture, and so our printer prints it in color, not black and white, so we are charged for the color copies.
I have exhausted my options in Word, and have been trying to create it as a TrueType font in DRAW, so word just thinks it's a symbol, not a picture.
The only file I have of the logo is a .bmp, so I've been tracing it to get it into vector form to manipulate. However, after all of my welding, combining, front minus back ect. ect. ect., I still can't get it down to the "1 object" requirement to make it a font.
Here's the logo:
I can't remember how i created an object..how can I show you the object?
View 14 Replies View RelatedWhen I select the text tool and click in the layout area, I type "i" and upon clicking off it auto changes to a capital "I". It's never done this before. If I do i space i space i space, it keeps changing, it won't allow me to have lower case letters.
View 4 Replies View RelatedWhere is the switch in CDR6 for toggling to only select an object per outline and not by clicking into the area. Used to be standard in the top bar.
View 5 Replies View RelatedI wish to align a text like this at an oval shape. The field of the text body does align at all - which I can understand. Using the grafic text, it aligns directly on/ over the outline of the oval shape. But I won't have the whole text in a round - I just want to have the paragraph's left side to be aligned/ positioned at the outer shape of the oval.
View 4 Replies View RelatedIs it possible to create a macro that would take an image made up of multiple objects and separate each object on a new page?
View 3 Replies View RelatedIs there a reason why the radius of curvature at the corners of an object is not maintained when you either stretch it or shrink it? Is there a way around it without having to redraw and reset the radius?
View 9 Replies View Related