When I select a PowerClip, I understand that a mini button bar should appear somewhere, which would allow me to do a number of things with the said clip. I don't see any floating 4-button mini bar?
I was able to re-size the content by going to the top menu ... but this mini- 4-button bar that apparently should appear whenever I hover over a PowerClip object is doesn't show up anywhere.
I select an object, then I select the Relative to object button:in the Property Bar, the X and Y aren't in 0.0 ".I have to deselect and reselect again the object and after that X and Y are ok.Same thing if I deactivate the Relative to object button:the X and Y show me 0.0 ".I have to deselect and reselect again the object and after that X and Y show me the real page's coordinate.
View 2 Replies View RelatedI just upgraded to X6 (32bit on vista). I use the powerclip feature a lot and have noticed that when I open a graphic I put together in a previous version (usually X5), if I have an object that has a powerclip and I extract the contents and delete them just to leave the original shape (that was the container). That shape that's left has an 'X' across it that I can't get rid of? I can even see it in the wireframe view. I tried the virtual segment delete tool to try to eliminate the lines but it didn't seem to do anything.
View 4 Replies View RelatedCan the items in the Contents Folder (e.g. Frames, pictures, etc.) be opened directly into Photoshop CS6 without first being opened in CorelDRAW X6. I have both programs, and it would be great if I had access to those objects whenever I'm using Photoshop.
View 3 Replies View RelatedAnd in the 157 page Macro PDF (really, did it need to be this long? How about an easy-command sheet), it says you can use the key command Ctrl+Shift+R to start recording... Well, that brings up the ruler.
I use Macros a lot in Excel (I record the commands that I want, then tweak in the editor), so I get how they are supposed to work - but I'm no programmer, and without the ability to record, I'm completely handcuffed. This really shouldn't be 1% as difficult as it has been
I have seen a reference to the auto close gaps button on the toolbar of CorelDraw.I need something like that, because whatever I do I cannot fill my lineart with the smartfill tool, even though I have closed all the gaps, as far as i can tell.
I am wondering if there is a problem with my Coreldraw X5 Software.I am using it on an iMac with Parallels.
Is it possible to assign a "grab" command to the button on the Wacom Intous 4 pen?
At the moment in Painter 12 and Artrage, if I hold down the button closest to the tip on the pen, then press the pen to the pad and drag, it will grab the canvas and allow me to move it around the screen. I cannot figure out how to set this up in Corel Draw X5
btw, its specifically Draw, not Photo Paint that I want to set this up in
I have multiple files open in Corel every day, and then, at the end of the day I have to run to get my lift (never at the same time!) and I would love a way to save all my files with just a click of a button.
I know Dreamweaver had this function - not sure if it still has, but I would love for Corel to have this so I don't have to scroll through all my open files and save them! If the file is not named it can pop up the save as box as usual and leave it open till the next day.
I have to save before I go, as we have very unreliable power and the UPS systems are not reliable either.
I cannot access the options button on the tools menu. It pops up error message that says Required resource unavailable. Then the program locks up and I have to restart the computer.
View 4 Replies View RelatedI have a circle which is blended.
In the circle is some text, rounded - not circle text, it is placed on top rather than typed in the circle directly.
I need to edit the text and it won't let me select it! No matter how far I zoom in to make sure I'm clicking the text, the circle gets selected and the blend tool opens.
They are not grouped or anything. This has happened before many times and with much persistance I get there eventually - but is there a much faster way?
I have an object that I would like to create an inside contour. Just 4 inside contours. However, how can I pick what colors I want for the individual contours?
View 5 Replies View RelatedAlthough I select inside an outline box, the outline box always seems to select. how to disable this?
View 3 Replies View RelatedI can't seem to select more than one text object at a time.....
I will select a paragraph or artistic text object, press and hold shift, and then continue selecting text objects. Nothing happens.... well, it seems to be 'thinking' but nothing ever happens until I release the shift key and then only the last object selected gets highlited.
issue with selecting and then moving an object in Photo Paint? I can hover and get the object name, and then select but when I go to move the object PPT selects and moves an entirely different object. I have held down Ctrl, Alt etc. to no avail. Bigger objects are easier since there is more to grab on to but smaller objects are a pain.
View 1 Replies View Relatedmacro that would select all text of specific color (white) and delete it from the page
View 1 Replies View Relatedis it possible to display dimensions when you select the object (Appeared inside the object ).
As because i have to look for the property bar again and again for the dimensions since my eyes are soring as it appears in very less size. If it appears the inside the object with appealing big size, then it could be easier for the user to note the size instantly despite of observing the property bar.
I'm using corel draw X5, I can't move object if I select "Traditional CorelDRAW" option for ctrl/shift keys, under Pick Tool menu in options window.
If I choose "Windows Standard", I'll be able to move the objects. But I don't like this behavior, because the way it draws new objects, anchoring them in center, instead of upper left corner.
This bug started just after I change this option, "just for curiosity". I wish I never discovered it. How can I solve it? I want to set ctrl / shift behavior to "Traditional CorelDraw" AND be able to move objects.
Is there a way to select objects like selecting all rectangles filled with red colour on the current page only. The find objects is not good for current page only. it works for whole document..so, any option?
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
I use everything keep them into the powerlclip and i have selected some of the powerclips and wanted to delete all the inside elements only. How to delete all the contents in the powerclip at once despite of going inside and deleting one after the other.
View 2 Replies View RelatedWhen i use margue select i get the blue dotted line but it disapears when i let go of the mouse and nothing is selected, this happens no mater what i'm trying to select. Do i not understanding how it works?
Second dumb question.
I have hit or miss luck with the weld feature some times it works and other times it simply will not work. I'm trying to make a small metal sign and need solid numbers (not Stencil) I draw a rectangle and add text above it and move it down to the top of the rectangle and select both and hit weld, some times it works and some times it doesn't. I have also tried to weld text to a 2 point line and cant do that at all, I suspect the 2 poing line is considered a demensional line so that may be my problem there. I have spent the greater part of a day trying to figue out thes two problems I have watched Graphics unleshed and read all i can find and still haven't figured out if it is me or the program. I have the problem with any of the fonts that come with X5.
Just wondering if I'm missing something when I select the crop tool to remove a section of a image. Is there any way to move the marquee around as if it was a square converted to curves...just move the handles to say a triangle? I know I can powerclip to any curve design I can create..it just looks as if you can use the handles to flip, rotate, etc..
Windows 7 64 bit, Intel Xeon 3.30GHz, 32GB memory, ATI FirePro V4800, (1)10,000 Velosirapptor internal HD, (1) internal 1TB HD, (1) 500GB external HD (2) external 3TB HDs, (2) HP z6200 printers, (1) OKI 9650 printer (1) Roland Camm1 Pro vinyl cutter
When I select the text tool and click in the layout area, I type "i" and upon clicking off it auto changes to a capital "I". It's never done this before. If I do i space i space i space, it keeps changing, it won't allow me to have lower case letters.
View 4 Replies View Relatedhave to select an object under an artistic media brush object. i try hold down alt key when select the object under the artistic media object but it select the second object
View 2 Replies View RelatedWe need a macro that will allow you to select a certain color fill inside document and change all to no fill hairlines. It needs to be capable of doing it several times within the same document. Does anything like this exist out there?
We have color replacer. We want it to do this automactically with a static group of colors everytime without any manual maniplulation required.
In this lesson we will consolidate code to prevent code reuse. Follow along as we demonstrate by doing the following and more:
Apply a color to a form command button, loop form controls, and save and get the color from registry
Part 2 of 7
cs_setInnerHtml('video_43f4e134-ee93-489d-ba2f-80042d243821','');
[URL]
in the Image Adjustment Lab there is no button to say OK or to CANCEL. How do I save a fixed image or retrieve the missing button?
View 5 Replies View Relatedwhy (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
We are having a big problem with dropping lines of text or parts of graphics. It is happening on 3 different laser systems and 2 different printers.
View 14 Replies View RelatedOften whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.
View 6 Replies View Relatedi´m using CRD since X3 so I think i´m quite experienced with all the crashes and uncompatibilities but now I have a problem which I can´t solve.
I made a graphic project which is quite large (2,6m x 2,0m @ 300dpi) and including raster grahics. The CDR file itself has about 400MB. When I tried to export this graphic to the png or jpg at the current size Corel X5 always crashes. I tried almost everything on many computers but always the same problem.
It looks like the project is too large for export. At this moment I desperately need to export the file to jpg or png at full resolution. Maybe X6 is more stable when exports or I have to simplify the project somehow but...
FILE IS UPLOADED here and I need to have it 2,6m x 2,0m: [URL]
I have a 900 x 500 px image in Adobe Illustrator, which overlaps a bit the canvas on the left side.
When I open this file with Corel, it adjusts my graphics so that it's centered on the screen. The AI file is centered on another point. Also, the canvas Corel creates is A4 sized. I always have to resize the canvas and then manually adjust the position of my graphics.
Question: How can I save an AI file so that when I open it at Corel, the position and size of the canvas will be exactly the same?
