is it possible to display dimensions when you select the object (Appeared inside the object ).
As because i have to look for the property bar again and again for the dimensions since my eyes are soring as it appears in very less size. If it appears the inside the object with appealing big size, then it could be easier for the user to note the size instantly despite of observing the property bar.
have to select an object under an artistic media brush object. i try hold down alt key when select the object under the artistic media object but it select the second object
View 2 Replies View RelatedI select an object, then I select the Relative to object button:in the Property Bar, the X and Y aren't in 0.0 ".I have to deselect and reselect again the object and after that X and Y are ok.Same thing if I deactivate the Relative to object button:the X and Y show me 0.0 ".I have to deselect and reselect again the object and after that X and Y show me the real page's coordinate.
View 2 Replies View Related I draw hundreds of trophy plates which have the same shape but not the same dimensions as inserted here
My question is How can I change the size of the outside rectangle while keeping the inside rectangle 3mm smaller with a 2mm scalloped corner.
Finding linear dimensions in the find/replace dialog in the edit menu? X6 doesn't seem to be working like prior versions and I can't find and group select dimensions.
View 1 Replies View RelatedWhen I draw an object it is difficult to get it to an exact size. When I adjust the size in the property bar the percentage changes. I need it to remain at 100% because I later apply a percentage change to it. Is there a way to reset the percentage value to 100% without the dimensions reverting back to their original value?
Alternatively, is there a way to create an object from the property bar alone?
We just started using X6 here at work, we were using X3. In X3 I never had a problem with page dimensions, with X6 anytime I go 200" or more in either dimension I get blank PDFs. 199" by 199" works just fine.
View 3 Replies View RelatedOften I find that if I have a bitmap within coreldraw and click edit bitmap, do some edits, and then save and return to draw, the dimensions have changed very slightly.
For example I just edited a bitmap that was 24.25" x 9.5" by clicking edit bitmap. I then made some tone adjustments and brushed out a spot, and hit save in photopaint. Now back in draw, I find the image has been scaled slightly down to 24.25" x 9.477" (9.447 instead of 9.5)
Color Printing Forum : Print Directory
I'm a longtime CorelDraw user (since the 90s), so I generally know what all the tools are... but there are times my mind lapses. Unfortunately, in CDX6 none of my tooltips appear. This is on version 16.3.0.1114 .
CTR+J > Workspace > Display > Show Tooltips has no effect.
Running on Windows 7 Professional x64 with 12GB RAM and NVidia Geforce 480 with latest drivers.
Is there a way to exclude single attributes from being defined in a object style? As example: i want to define an outline that does not change width of the objects, but everything else.
There is a small tick box right of every attribute with help text "None this object attribute is not defined by a custom style" but i can not mark it. My feeling is, that i need to switch on this tick box to get the result i need, but i can not. When i click on it, it just gives me a greyed out "Revert". When i try to make child styles, there is a way to break the connection to parent style with these tick boxes, but no luck.
Is it a bug? I tried it with X6, X6.1 and X6.2
I am having a problem trying to get text to fit to exact dimensions. Here is a link to a graphic representation of the problem I will explain below: [URL] ..........
This is an example of a plaque I'm working on. The red box Q will be a photograph while the black box will be text (represented by the blue lines). I have a specific body of text that needs to fit inside the black box such that the left margin (segment AB) is exactly 1/2 inch from box Q. Further, the text should also be exactly 1/2 inch from box Q at segment BC, such that the top of the text meets this 1/2 inch margin.
I can't make the text fit correctly. If you notice the text line labeled Z, you'll see that the top of the text does not reach the segment BC, meaning that the distance between box Q and the top of the text Z is much greater than 1/2 inch. If this is the case, the picture in box Q will be surrounded by unequal space on the right (AB) as compared to the bottom (BC). Furthermore, the text beginning at point A and the text labeled X also need to reach the exact margins of the black box to meet the exact dimensions of the borders of the final piece.
When I use something like Text > Paragraph Text Frame > Fit Text to Shape, what happens is the line labeled Y clearly sits to low, making the line spacing force line Z too far from segment BC.
For better speed i'm using coreldraw 12. All of a sudden it is showing different colors for files. A color shows up different in version 14 [ that is the correct display ] . it is incorrectly being showed in version 12. i've put up screenshots of both versions. What setting is messed up in version 12.
THIS IS THE INCORRECT ONE AS SEEN IN VERSION 12 . The file is same
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
Corel Connect not showing thumbnails.I have the paid download version of CorelDraw GS X5 installed on a PC running Windows Vista Ultimate 32-bit. I found that the Corel Graphics - Windows Shell Extension only shows in the CorelDraw installer when "Custom" is selected versus "Typical," even though the shell extension shows in Control Panel. The latest twist is that Corel Connect will show photo thumbnails on the hard drive, but will not show thumbnails for photos on a CD or DVD. Other than a different file structure, a DVD or CD is read only. If I copy a photo from a DVD to the C: drive, Corel Connect will show the thumbnail on C:. Windows Explorer shows the thumbnails on the hard drive, CD, or DVD. Corel Connect will not show thumbnails of the Corel .CDR files on the hard drive, CD, or DVD in Vista but it will show them in Win XP.
Why doesn't Corel Connect display .jpg thumbnails on a DVD or CD? I think there is a bug in the Corel Graphics - Windows Shell Extension in Windows Vista.
I'm trying to figure out how to accurately display the current rotation angle of an object in DRAW X6. Based on my drawing precision settings, the angular accuracy is there, but it's not properly displayed.
IE - If I type in 5.05 deg rotation, it will DISPLAY 5.1 but will actually be 5.05.
Is there a way to update the display to show more than one decimal place for rotation?
How can I make CorelDraw X5 not display fonts marked "hide" in the FONTS folder of Win 7? Scrolling through hundreds of fonts to find the one you want is a real nightmare.
View 5 Replies View Relatedi want this bangala text to be arranged in LED displAY board, exactly the same as posted before)
View 1 Replies View RelatedI have a circle which is blended.
In the circle is some text, rounded - not circle text, it is placed on top rather than typed in the circle directly.
I need to edit the text and it won't let me select it! No matter how far I zoom in to make sure I'm clicking the text, the circle gets selected and the blend tool opens.
They are not grouped or anything. This has happened before many times and with much persistance I get there eventually - but is there a much faster way?
I have an object that I would like to create an inside contour. Just 4 inside contours. However, how can I pick what colors I want for the individual contours?
View 5 Replies View RelatedAlthough I select inside an outline box, the outline box always seems to select. how to disable this?
View 3 Replies View RelatedI'm using the trial version of X5 and have noticed that the number of characters that display the file name at the top has been shortened since X3. In some cases I'm not able to even see any of my file name because I have things saved in many subfolders for organizational purposes. It appears that it is limited to about 120 characters, which sounds like a lot, but when using dropbox and other subfolders, can fill up quickly. When I open the same exact file in X3, the name is fully displayed. How to change this? Or is this possibly just a trial version thing? .
View 1 Replies View Relatedcurrently getting by with v11 on winXP..Having a recent problem which I hope one of you can identify. I undoubtedly caused this problem myself by while trying to set up multiple monitors with different screen resolutions, dpi's, font viewing sizes, etc... but now I don't know exactly what setting caused it or how to get back to normal.
Here's the problem - two dialog boxes are displaying very skewed as shown in the screen-shots below. It's only these two dialogs I seem to have trouble with. It's like their popup windows are wrong proportions. No settings I change in my monitor setups seem to correct the situation.
tool-active-&-inactive.jpg
In coreldraw there should be a clear appearance of tool activeness like in attachment. Besides
if any command is keystoreked then the command is displayed and in the center so that user
can understand that the command is performed....
see the attachment as how the tool should be clearly appeared as active
I'm trying to Sign In inside CorelDraw X6 using Help->Sign In. A new windows pop up requesting my email and password. I indicate my credentials and click on "Sign in". But then I get this error: "This program cannot display the webpage. Most likely causes:You are not connected to the Internet. The website is encountering problems. There might be a typing error in the address"
But I am connected to internet. If I click on Account settings it works. The main problem that I have is that for any updates I need to Sign in but I get the same error!
We have problems with some fonts, they display as rectangles on screen but prints just fine. Tested on both a W7 and a XP computer with all patches/updates installed. The same fonts displays fine in other applications...
View 3 Replies View RelatedI've been trying to get W7-64 to display X5 thumbnails. I've been trying for months. My efforts have brought me to:
Have you tried this?
Have you tried that?
Have you tried Mystic Thumbs?
It's Microsoft's fault
The best I can do is a kluge I don't want to live with. I've been a Corel user for 20 years. Much as I am attached to the program, this makes it virtually unusable. I work with a ton of files. I need to be able to see what they are before opening them.
I'm disappointed to see this problem has been going on for a number of years. It gives me the feeling the good people who built Corel are all gone now, and pride in the product went with them.
I'd love to learn the real honest-to-goodness Corel fix is jist around the corner, but I can't even find an official Corel position on this issue. Is there one? other than
The problem does not exist
The problem is the user's fault
The problem is Microsoft's fault
I can't seem to select more than one text object at a time.....
I will select a paragraph or artistic text object, press and hold shift, and then continue selecting text objects. Nothing happens.... well, it seems to be 'thinking' but nothing ever happens until I release the shift key and then only the last object selected gets highlited.
issue with selecting and then moving an object in Photo Paint? I can hover and get the object name, and then select but when I go to move the object PPT selects and moves an entirely different object. I have held down Ctrl, Alt etc. to no avail. Bigger objects are easier since there is more to grab on to but smaller objects are a pain.
View 1 Replies View Relatedmacro that would select all text of specific color (white) and delete it from the page
View 1 Replies View RelatedWhen I select a PowerClip, I understand that a mini button bar should appear somewhere, which would allow me to do a number of things with the said clip. I don't see any floating 4-button mini bar?
I was able to re-size the content by going to the top menu ... but this mini- 4-button bar that apparently should appear whenever I hover over a PowerClip object is doesn't show up anywhere.
Is there a way to display in full screen preview page only, meaning nothing outside page borders, no bleed or objects around page just.
View 13 Replies View RelatedI need to find a way to cut the shape of one object out of another object. In the above photo I need to be able to print the black crosses without the printer printing the white ink under them (you can see where the black ink is not adhering to the white ink very well).
View 11 Replies View Related