I draw hundreds of trophy plates which have the same shape but not the same dimensions as inserted here
My question is How can I change the size of the outside rectangle while keeping the inside rectangle 3mm smaller with a 2mm scalloped corner.
Finding linear dimensions in the find/replace dialog in the edit menu? X6 doesn't seem to be working like prior versions and I can't find and group select dimensions.
View 1 Replies View RelatedWhen I draw an object it is difficult to get it to an exact size. When I adjust the size in the property bar the percentage changes. I need it to remain at 100% because I later apply a percentage change to it. Is there a way to reset the percentage value to 100% without the dimensions reverting back to their original value?
Alternatively, is there a way to create an object from the property bar alone?
We just started using X6 here at work, we were using X3. In X3 I never had a problem with page dimensions, with X6 anytime I go 200" or more in either dimension I get blank PDFs. 199" by 199" works just fine.
View 3 Replies View RelatedOften I find that if I have a bitmap within coreldraw and click edit bitmap, do some edits, and then save and return to draw, the dimensions have changed very slightly.
For example I just edited a bitmap that was 24.25" x 9.5" by clicking edit bitmap. I then made some tone adjustments and brushed out a spot, and hit save in photopaint. Now back in draw, I find the image has been scaled slightly down to 24.25" x 9.477" (9.447 instead of 9.5)
Color Printing Forum : Print Directory
is it possible to display dimensions when you select the object (Appeared inside the object ).
As because i have to look for the property bar again and again for the dimensions since my eyes are soring as it appears in very less size. If it appears the inside the object with appealing big size, then it could be easier for the user to note the size instantly despite of observing the property bar.
I am having a problem trying to get text to fit to exact dimensions. Here is a link to a graphic representation of the problem I will explain below: [URL] ..........
This is an example of a plaque I'm working on. The red box Q will be a photograph while the black box will be text (represented by the blue lines). I have a specific body of text that needs to fit inside the black box such that the left margin (segment AB) is exactly 1/2 inch from box Q. Further, the text should also be exactly 1/2 inch from box Q at segment BC, such that the top of the text meets this 1/2 inch margin.
I can't make the text fit correctly. If you notice the text line labeled Z, you'll see that the top of the text does not reach the segment BC, meaning that the distance between box Q and the top of the text Z is much greater than 1/2 inch. If this is the case, the picture in box Q will be surrounded by unequal space on the right (AB) as compared to the bottom (BC). Furthermore, the text beginning at point A and the text labeled X also need to reach the exact margins of the black box to meet the exact dimensions of the borders of the final piece.
When I use something like Text > Paragraph Text Frame > Fit Text to Shape, what happens is the line labeled Y clearly sits to low, making the line spacing force line Z too far from segment BC.
Looking to see if corel has any way to scale an open outline along its path from one size to another. So for example a curvy open ended line would start with a stroke of 2 pt and end with a stroke of 20 pt?
View 1 Replies View RelatedJust wondering if there is a shortcut or perhaps possibility to make one to switch in between drawing scale....
View 4 Replies View RelatedListing on ebay some clocks i do, looking at the latest requirements. They want a jpg image 1600 pixels on the longest size, ok its big but fair enough.
They also want it to be 90 on the 0-99 JPEG quality scale. Someone has shown me that scale in Ifranview but where do i find it in Corel Draw X4 blowed if i can find it, I don't really want to add another program just to sort this out, i am confident Corel Draw X4 can do it.
Outlines don't scale globally with objects. I have a crest with a bunch of elements in it. Some have outlines and some don't. It's 3 inches. I would like to enlarge it to 10 or whatever. If I select the crest and enlarge it, the outlines don't scale. The only option I've ever known of was to take them all individually and check off the scale outline on each object. It's a real workflow killer.
I spent the day reacquainting myself with CorelDraw. This and other similar show stoppers remind me of how difficult it is to make the switch from Illustrator back to CorelDraw. So how are people dealing with this? Are you simply taking however much time it takes to change each individual element to scale with object or is there a preference somewhere that I'm missing? This is a big stumbling block for me. There are a lot of major features I know I'd be leaving behind but there are others that I'd have access to. It's the little things like this that allow me to fly rather than crawl.
Recently we have had issues with customers that want a size scale behind their art to more appropriately judge their art size to approve.
I made a grid by hand, but is there a way to run a macro to fit it exact to the art?
How to scale the powerclip main object without squeezing the powerclip content ?
View 1 Replies View Relatedexporting my CorelDrawX6 files as a high quality jpg for large scale printing purposes. In X4 it was very easy - just export as usual to the highest quality cmyk jpg and open in Photo Paint... now when I export this way it takes forever to bring up the preview page and most of the time it ends up being blank. Sometimes even crashes. I have played with all options in the filter dialog menu that I can find but nothing works. Thought it might be a file size problem but never had that problem in X4 and anything under 200dpi will not be high enough quality.
View 11 Replies View RelatedHopefully my title gets the point across. I've read numerous threads on here where people seem to have the same issue, but I've yet to discover a solution.
I recently bought a new pc and installed Corel Draw X5. When I export to eps and open the eps in Corel, the Pantone colors appear nearly black. This is also true for my clients, although I'm not sure what program they are using to open the eps.
It is worth mentioning that on my old PC I did not have this problem. EPS files I exported from Corel Draw X5 were fine. I could export eps files containing Pantone colors, and the Pantone colors would be there when I opened the eps file.
The settings I'm using under export to eps dialogue are the exact same settings I was using before:
Output colors as Native and PostScript 3.
I am running Windows 7 Home Premium SP1, and CorelDraw X5 15.2.0.695
I have a complex (includes tints) clip art object that needs printing in a specific pantone color I just convert it to grayscale using edit>find and replace objects>color mode. then print it as a black plate and just use another color on press.
Today I had to send off artwork to another printer. Dang. How to install a macro. Import clip art to be modified to a new document, do not do this in your working document.
Use Edit>Find and Replace> Find Objects
Replace a color model or palette. Next
Leave as is except change Replace with color model to "Grayscale" Next>Replace all
Repeat 2-4 for 'outlines' if you have them.There you now have a gray scale clipart, but the fun continues!You'll need to know what pantone color you want to use. Let's say Reflex Blue. Make a square and color it Reflex blue from a pantone palette.Duplicate the square and create swatches at 90% 80% 70% etc down to white.Select these square swatches, then Windows>Color Palette>Create Palette from Selection. Save palette with a temporary name, it is only time use. Or you could call it 'Reflex Blue'Now go to this website and download the macro "limit colors" URL...
Drop it in your GMS folder in under your username to install the macro. (might have to save the drawing and restart Corel...)Once you reopen your now grayscale clipart document, Select the clipart. Run the macro (Tools>Macros>Run Macros) LimitColors.Posterize select the number of colors in your new palette if you created 10% swatches, go with 11, if you did steps of 20% then you'll do 6 (don't forget white).Run the macro LimitColors.LimitColors and select your new palette you made in step 9.
I quite often need a separate ruler scale on each page of a multi-page document. The only way I know how to do this is to create a separate document for each drawing that requires a new scale.
I request that you add the ability to change the ruler scale on a per page basis within a single multi-page document.
I am using CDR X5 SP1.
why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
We are having a big problem with dropping lines of text or parts of graphics. It is happening on 3 different laser systems and 2 different printers.
View 14 Replies View RelatedOften whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.
View 6 Replies View Relatedi´m using CRD since X3 so I think i´m quite experienced with all the crashes and uncompatibilities but now I have a problem which I can´t solve.
I made a graphic project which is quite large (2,6m x 2,0m @ 300dpi) and including raster grahics. The CDR file itself has about 400MB. When I tried to export this graphic to the png or jpg at the current size Corel X5 always crashes. I tried almost everything on many computers but always the same problem.
It looks like the project is too large for export. At this moment I desperately need to export the file to jpg or png at full resolution. Maybe X6 is more stable when exports or I have to simplify the project somehow but...
FILE IS UPLOADED here and I need to have it 2,6m x 2,0m: [URL]
I have a 900 x 500 px image in Adobe Illustrator, which overlaps a bit the canvas on the left side.
When I open this file with Corel, it adjusts my graphics so that it's centered on the screen. The AI file is centered on another point. Also, the canvas Corel creates is A4 sized. I always have to resize the canvas and then manually adjust the position of my graphics.
Question: How can I save an AI file so that when I open it at Corel, the position and size of the canvas will be exactly the same?
Entire Corel suite freezes on start up - I cannot do anything. Reinstalling also does not work - suddenly buttons on the installer dissapeared - there is no text on them and when I click them nothing happens.
A week ago I have installed service pack 3 and everything worked fine. It has all gone wrong again. And installation of the latest patches does not work anymore.
I am running Windows 7 64-bit and I've got a feeling that is must have something to do with system updates.
I often create graphics in CorelDRAW export it and inserting it into my MS Word documents and finally convert my documents to pdf. When it is vector graphics, exporting as EPS works fine: The increase in file size is small and lines are displayed perfect independant of how much you zoom in the final pdf document. When I handle bitmaps, I usually export as JPG (or PNG), which works well too. My problem arise when I have a mixed vector and bitmap image. I have imported a bitmap into CorelDRAW and created some lines on top of it. I want to export it as a whole. If I export as EPS, the final result is fine, but filesize has increased considerable. If I choose to export as jpg, the filesize is fine, but the lines are getting slightly blurry. Is there a way to get the best of both Worlds - resonable filesize and perfect lines? Maybe settings in some dialog??
View 7 Replies View RelatedHow on earth do you export bitmaps cropped to the size of the canvas? This seems like the simplest functionality ever but i can't get it to work. For example, I am designing an advert for use online. It needs to be 600px wide x 150px high. I may want to use a background image or a photo that when placed goes beyond the edge of the canvas. Logic dictates i would only want to export the canvas with a web image (otherwise why would i have set an exact number of pixels.) However, Corel insists on exporting everything on the canvas and desktop. Surely it should allow us to choose the bounding area of the exported bitmap.
Just to clarify what I mean, i've included a screen shot showing and example original graphic and the export result. I'm sure there must be an easy way to do this. If it's one like this i can crop it easily, but sometimes a print customer will ask me to send them, for example, a 32pp booklet we have designed for them with each page as a JPG and to crop each one manually is a right pain.
X5 Recently have begun missing parts of print out. Tried to duplicate but appears completely random.
Output to both Full colour laser and Wide Format printers will miss either text or part of objects. Today printed the text but not the text effects. Initially closed and reopened, rebooted, However this has become a now daily feature so regardless tried reprint from the same screen so next print has everything included.
Very costly and time consuming - print preview shows all correct but output is not the same.
Running Win 7 64bit 8GB Ram
I have some Ai files that I need to open in X6 but they use linked images which I have, but when opening in CorelDraw all I get is the basic Ai stuff but not the linked images, is there an easy way to open the Ai file and see it as it was intended?
As a sub note I can't go back to the supplier of the Ai file to make any changes.
I just used the help file for the first time in ages and noticed all the links to the graphics are broken hence no diagrams etc. I tried to search out where they are usually stored and it gives some weird Address under properties. It's a vba so suppose it's a database? How do I restore the links without having to do a re-install?
As to the pen: How do you stop the annoying over-the-top predictive curve that happens past the node in the next section after a long drag to form the first curve. i.e. you simply want to draw a straight line after dragging out a curved section previously and you get this unmanageable curve to deal with ?
02012013010.jpg
Blank Blocks behind text and graphics
After a "format c:" i´m trying to reinstall my corel x5. But after starting the install-progress i only can see this:
What does it mean? I can´t imagine where this comes from?!? How to handle this fault?
I am building a new desktop and am thinking about using dual graphics cards for my work in Corel X5. Ive seen nothing in technical specs or min requirements that even alludes to the program being able to take advantage of an SLI configuration (evga gtx 465 superclocked with 1gb ddr5).
View 5 Replies View Related