CorelDRAW Graphics Suite X6 :: Powerclip Leaving X After Extracting Contents?
Apr 19, 2012
I just upgraded to X6 (32bit on vista). I use the powerclip feature a lot and have noticed that when I open a graphic I put together in a previous version (usually X5), if I have an object that has a powerclip and I extract the contents and delete them just to leave the original shape (that was the container). That shape that's left has an 'X' across it that I can't get rid of? I can even see it in the wireframe view. I tried the virtual segment delete tool to try to eliminate the lines but it didn't seem to do anything.
View 4 Replies
ADVERTISEMENT
Mar 26, 2012
Editing Powerclip contents is verryy slow.
May be because of corelDraw X6 now has a unique feature of showing contents outside the powerclip. Am I right?
What if I want to switch off this excellent feature or how to make this fast as it was always.
View 11 Replies
View Related
Nov 14, 2013
I am using X4 for use in my dye sublimation business. I have an image that was provided to me from my customer. I created a template in Coreldraw, sized the photo to fit and power clipped it into the template. I than created the text the customer wanted and placed it over the image. I than grouped everything together and printed the image. When it prints, the only thing that prints is the template border and the text. I than took the same template and text and power clipped a completely different image into it. Sent it to the printer and voila, no problem.
The image the customer sent to me is a .jpg image. I don't understand why it won't print. Is it possible there is some sort of code or something within the image that is preventing it from printing ? It sounds far fetched to me but I had to ask. If I export the completed image as seen on the screen to a Jpeg and view it on the screen, the powerclipped background is there.
View 5 Replies
View Related
Jun 10, 2012
With X6 if I extract the contents an object still shows up as a Powerclip. How can I get X6 to stop treating it as a powerclip?
View 2 Replies
View Related
May 4, 2011
why there are some shortcuts by some commands displayed by default but you have any shortcuts by powerclip?
View 8 Replies
View Related
Apr 6, 2012
When you extract everything from a powerclip, the object that was the powerclip retains it's powerclip state. The biggest problem is when it no longer has any contents, that big X appears across the object to show that it's an empty powerclip. OK, I can deal with that or ignore it, but the problem is, the thing acts like it's part of the object as far as printing goes, and that I can't have. This can't be the way it was originally intended to work? Shouldn't it be just an on-screen indicator, and not a physical part of the object now? I know I can revert the object back to a "normal" object, but it seems to be just another useless step that shouldn't be needed.
What I'd like to see is an option that when a powerclip no longer has any objects inside, it automatically reverts to a normal object like in previous versions of Draw. Of course, it's too late now, that will never happen. If anything, it should be possible to have the empty powerclip X indicator be changed over to a "phantom" object that is only shown on screen and doesn't exist in any other way so that it doesn't print or otherwise effect the drawing.
Great, it shows up in PDFs too. Looks like I'll have to get used to hitting that "No Frame" button every time I hit the "Extract Contents" button. Or maybe I'll write a macro to do both and link it to a toolbar button. Reminds me of a post I made about Corel Script in version 6 (yes, six, not sixteen) where it allowed us to write our own "feature" fixes when options were removed for no good reason.
View 16 Replies
View Related
Sep 9, 2011
Is there a way to resize a powerclip container that keeps the contents at its original size - so you can view more or less of the contents simply by changing the shape of the container?
(Rather than editing the contents or extracting the contents and then resizing the container).
View 3 Replies
View Related
Mar 28, 2012
Is this possible to hide the ghost display which is not in x5. This is confuses me often.
View 7 Replies
View Related
Nov 15, 2011
Problem as we have with CD X5 when trying to crop a PowerClip Object with another object?
When we try to crop a PowerClip object with a rectangle or any other shape X5 just crashes.
View 13 Replies
View Related
Apr 27, 2012
I am creating a CMYK document. After converting a reference photo to CMYK I imported it into my DRAW file. I will use that to pick colors.
The problem: the eyedropper tools work correctly capturing CMYK colors as long as it is not in a powerclip. If I place that image in a powerclip the eyedropper tool only sees RGB.
Is there a setting somewhere that I need to make or am I stuck just working outside of the Powerclip? I have plenty of alternative ways to workaround this issue, just didn't know if this was a bug or something.
CORRECTION: It's not the Powerclip at all. It has to do with whether or not I have the layer locked. Unlocked = CMYK, locked=RGB. ?
Also, changing the Edit Across Layers setting seems to be a problem as well.
View 12 Replies
View Related
Sep 10, 2013
Is there any solution, as powerclip is consuming much time to come out of.... and also note that it is having many objects inside the powerclip. It should not act like a normal object, consumes much memory and time
View 3 Replies
View Related
Aug 17, 2012
I found a bug on X6 and not sure if it was there before the update. I have a Power Clip frame that contains 2 images.
The one to the right is smaller than the frame while the one on the left is much bigger and there is a blank space between them. When I export the image to a PSD file the bigger image inside the frame wraps around and a portion is displayed on the right.
View 1 Replies
View Related
Nov 26, 2012
I am just newly figuring out that I can complete repetitive tasks by recording a macro, simple right? I am trying to power clip an imported image into a shape via macro but it is not working.. I am getting Run-Time error's... Parameter Index is out of range.
I have one "shape" and 25 different car logo's I am needing to power clip the logo inside the shape with the click of the "macro" and it is just NOT WORKING! I understand that I can complete the task at hand by simply creating 25 bitmaps, one with each logo then simply importing that into my document, but I need to figure this Macro for this out because it will become more complex and time consuming as time goes on and I add more logos and different shapes in which I need to power clip them into. I simply understand that I can hit the "RECORD" button, do what needs done and then hit stop.. then of course do this again later by playing the macro.
View 3 Replies
View Related
Jul 26, 2013
I'm having an issue with PowerClip I never used to have in X3 (the last version I was able to afford).Basically, some small details in a graphic keep getting irreversibly lost due to PowerClip... I'm tracing over a drawing I scanned, and placing small details inside larger objects to keep my workspace clean. What's going on is, as I get to work on, say adding blends and gradients to a different part of my graphic, the next time I zoom out I notice the details I placed inside a container I wasn't currently working on are suddenly gone; They're not in the wireframe view for either the full image or within the container, and have simply vanished from the container, as though I never even made them. I make sure outlines are always converted to objects before I put them in a container, but I can't imagine it matters..PowerClip is one of my most-used tools and it'll really limit my abilities if I can't rely on it.
View 1 Replies
View Related
Mar 14, 2012
How to create a text effect like below?
It seems like a combination of fountain fill and powerclip?
View 15 Replies
View Related
Apr 2, 2013
When I have a raster image power clipped into a vector frame and I attempt to trim that power clipped image. Corel locks up.
View 15 Replies
View Related
Apr 8, 2011
I have created a heart object. When I powerclip an object inside the heart, I would like the object to be faded around the edges of the heart. I might want the edges of the graphic to be unevenly faded or feathered (I hope these are the correct terms). I also want to do this with an oval I created.
View 10 Replies
View Related
Feb 29, 2012
is there a way to centre or align some content of a power clip after it had been dropped in without extracting the whole content and putting it back in ? Like using align and distribute but that seams not to include a relationship to the clip container.
View 14 Replies
View Related
Nov 29, 2013
So I powerclip a duplicate of a background image into a text, and would like to create a bevel effect on the text, like this..But I couldn't find out how to do it.When I choose the text with the powerclip image, the bevel tool is grey out so I can't apply the bevel effect.
View 14 Replies
View Related
Oct 8, 2012
My power clip has stopped working, seems like it works, but never shows the finished image!
View 1 Replies
View Related
Jul 1, 2011
I use everything keep them into the powerlclip and i have selected some of the powerclips and wanted to delete all the inside elements only. How to delete all the contents in the powerclip at once despite of going inside and deleting one after the other.
View 2 Replies
View Related
Jul 15, 2013
I'm working on the cover and editorial pages of a large publication and used CorelDRAW X6. Converted the pages to PDF and sent to press folks who use Kodak Insite to put the publication to press. They noticed on the CMY channels a white "X" strangely going from corner to corner on the pages. They eliminated it on their end before going to press. Initially, the proofing pages had all content within the bleeds powerclipped to 8.5x11 and then the pages contents were extracted to create bleeds, which left the dreaded "X" behind. I've been in the biz for 30 years and using Corel exclusively since it's inception (10,000's of hours with DRAW) I understand this is the way X6 treats powerclips now and I can select "none" in the context menu to eliminate the "X"... but who da thunk it would show up in a press file!?
I'll go to wireframe mode and proof pages from now on..If I say I don't want a powerclip anymore, I don't want to jump through hoops (or a handful of mouse clicks) to remove it. Any word on this being altered in future updates/versions?
View 13 Replies
View Related
Nov 22, 2013
Why my Ioline cutter keeps leaving these little 'tags' on my lettering? It almost as if it doesn't finish the cut through or something. Can it be fixed? Its not because the blade needs changing, because it does this even after Ive just changed the blade.
View 9 Replies
View Related
Jul 8, 2012
I'm using Corel Draw 12 and on some of my computers, if I resize or flip an image the original image remains on screen as well as the resized or flipped version. On other computers it doesn't happen.
View 2 Replies
View Related
Mar 19, 2011
How to scale the powerclip main object without squeezing the powerclip content ?
View 1 Replies
View Related
Jan 6, 2013
When I select a PowerClip, I understand that a mini button bar should appear somewhere, which would allow me to do a number of things with the said clip. I don't see any floating 4-button mini bar?
I was able to re-size the content by going to the top menu ... but this mini- 4-button bar that apparently should appear whenever I hover over a PowerClip object is doesn't show up anywhere.
View 3 Replies
View Related
Aug 6, 2013
I am designing a book of walks. I want to create a master map cover a large area and extract regions of this onto separate pages. The individual pages will then have additions graphics and text added and edits to the map data may be required.
What is the bast way of copying a region of a document to another.
I am an experienced VBA programmer and could develop utilities to support this process.
View 2 Replies
View Related
Feb 5, 2013
Can the items in the Contents Folder (e.g. Frames, pictures, etc.) be opened directly into Photoshop CS6 without first being opened in CorelDRAW X6. I have both programs, and it would be great if I had access to those objects whenever I'm using Photoshop.
View 3 Replies
View Related
Mar 18, 2012
why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
View 7 Replies
View Related
Dec 1, 2010
We are having a big problem with dropping lines of text or parts of graphics. It is happening on 3 different laser systems and 2 different printers.
View 14 Replies
View Related
Sep 5, 2009
Often whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.
View 6 Replies
View Related
