is there a way to centre or align some content of a power clip after it had been dropped in without extracting the whole content and putting it back in ? Like using align and distribute but that seams not to include a relationship to the clip container.
View 14 Replies
So I powerclip a duplicate of a background image into a text, and would like to create a bevel effect on the text, like this..But I couldn't find out how to do it.When I choose the text with the powerclip image, the bevel tool is grey out so I can't apply the bevel effect.
View 14 Replies View RelatedHow to scale the powerclip main object without squeezing the powerclip content ?
View 1 Replies View RelatedI am using X4 for use in my dye sublimation business. I have an image that was provided to me from my customer. I created a template in Coreldraw, sized the photo to fit and power clipped it into the template. I than created the text the customer wanted and placed it over the image. I than grouped everything together and printed the image. When it prints, the only thing that prints is the template border and the text. I than took the same template and text and power clipped a completely different image into it. Sent it to the printer and voila, no problem.
The image the customer sent to me is a .jpg image. I don't understand why it won't print. Is it possible there is some sort of code or something within the image that is preventing it from printing ? It sounds far fetched to me but I had to ask. If I export the completed image as seen on the screen to a Jpeg and view it on the screen, the powerclipped background is there.
With X6 if I extract the contents an object still shows up as a Powerclip. How can I get X6 to stop treating it as a powerclip?
View 2 Replies View Relatedwhy there are some shortcuts by some commands displayed by default but you have any shortcuts by powerclip?
View 8 Replies View RelatedWhen you extract everything from a powerclip, the object that was the powerclip retains it's powerclip state. The biggest problem is when it no longer has any contents, that big X appears across the object to show that it's an empty powerclip. OK, I can deal with that or ignore it, but the problem is, the thing acts like it's part of the object as far as printing goes, and that I can't have. This can't be the way it was originally intended to work? Shouldn't it be just an on-screen indicator, and not a physical part of the object now? I know I can revert the object back to a "normal" object, but it seems to be just another useless step that shouldn't be needed.
What I'd like to see is an option that when a powerclip no longer has any objects inside, it automatically reverts to a normal object like in previous versions of Draw. Of course, it's too late now, that will never happen. If anything, it should be possible to have the empty powerclip X indicator be changed over to a "phantom" object that is only shown on screen and doesn't exist in any other way so that it doesn't print or otherwise effect the drawing.
Great, it shows up in PDFs too. Looks like I'll have to get used to hitting that "No Frame" button every time I hit the "Extract Contents" button. Or maybe I'll write a macro to do both and link it to a toolbar button. Reminds me of a post I made about Corel Script in version 6 (yes, six, not sixteen) where it allowed us to write our own "feature" fixes when options were removed for no good reason.
Is there a way to resize a powerclip container that keeps the contents at its original size - so you can view more or less of the contents simply by changing the shape of the container?
(Rather than editing the contents or extracting the contents and then resizing the container).
Is this possible to hide the ghost display which is not in x5. This is confuses me often.
View 7 Replies View RelatedProblem as we have with CD X5 when trying to crop a PowerClip Object with another object?
When we try to crop a PowerClip object with a rectangle or any other shape X5 just crashes.
I am creating a CMYK document. After converting a reference photo to CMYK I imported it into my DRAW file. I will use that to pick colors.
The problem: the eyedropper tools work correctly capturing CMYK colors as long as it is not in a powerclip. If I place that image in a powerclip the eyedropper tool only sees RGB.
Is there a setting somewhere that I need to make or am I stuck just working outside of the Powerclip? I have plenty of alternative ways to workaround this issue, just didn't know if this was a bug or something.
CORRECTION: It's not the Powerclip at all. It has to do with whether or not I have the layer locked. Unlocked = CMYK, locked=RGB. ?
Also, changing the Edit Across Layers setting seems to be a problem as well.
Is there any solution, as powerclip is consuming much time to come out of.... and also note that it is having many objects inside the powerclip. It should not act like a normal object, consumes much memory and time
View 3 Replies View RelatedI found a bug on X6 and not sure if it was there before the update. I have a Power Clip frame that contains 2 images.
The one to the right is smaller than the frame while the one on the left is much bigger and there is a blank space between them. When I export the image to a PSD file the bigger image inside the frame wraps around and a portion is displayed on the right.
I am just newly figuring out that I can complete repetitive tasks by recording a macro, simple right? I am trying to power clip an imported image into a shape via macro but it is not working.. I am getting Run-Time error's... Parameter Index is out of range.
I have one "shape" and 25 different car logo's I am needing to power clip the logo inside the shape with the click of the "macro" and it is just NOT WORKING! I understand that I can complete the task at hand by simply creating 25 bitmaps, one with each logo then simply importing that into my document, but I need to figure this Macro for this out because it will become more complex and time consuming as time goes on and I add more logos and different shapes in which I need to power clip them into. I simply understand that I can hit the "RECORD" button, do what needs done and then hit stop.. then of course do this again later by playing the macro.
I'm having an issue with PowerClip I never used to have in X3 (the last version I was able to afford).Basically, some small details in a graphic keep getting irreversibly lost due to PowerClip... I'm tracing over a drawing I scanned, and placing small details inside larger objects to keep my workspace clean. What's going on is, as I get to work on, say adding blends and gradients to a different part of my graphic, the next time I zoom out I notice the details I placed inside a container I wasn't currently working on are suddenly gone; They're not in the wireframe view for either the full image or within the container, and have simply vanished from the container, as though I never even made them. I make sure outlines are always converted to objects before I put them in a container, but I can't imagine it matters..PowerClip is one of my most-used tools and it'll really limit my abilities if I can't rely on it.
View 1 Replies View RelatedI just upgraded to X6 (32bit on vista). I use the powerclip feature a lot and have noticed that when I open a graphic I put together in a previous version (usually X5), if I have an object that has a powerclip and I extract the contents and delete them just to leave the original shape (that was the container). That shape that's left has an 'X' across it that I can't get rid of? I can even see it in the wireframe view. I tried the virtual segment delete tool to try to eliminate the lines but it didn't seem to do anything.
View 4 Replies View RelatedHow to create a text effect like below?
It seems like a combination of fountain fill and powerclip?
When I have a raster image power clipped into a vector frame and I attempt to trim that power clipped image. Corel locks up.
View 15 Replies View RelatedI have created a heart object. When I powerclip an object inside the heart, I would like the object to be faded around the edges of the heart. I might want the edges of the graphic to be unevenly faded or feathered (I hope these are the correct terms). I also want to do this with an oval I created.
View 10 Replies View RelatedMy power clip has stopped working, seems like it works, but never shows the finished image!
View 1 Replies View RelatedI use everything keep them into the powerlclip and i have selected some of the powerclips and wanted to delete all the inside elements only. How to delete all the contents in the powerclip at once despite of going inside and deleting one after the other.
View 2 Replies View RelatedI'm working on the cover and editorial pages of a large publication and used CorelDRAW X6. Converted the pages to PDF and sent to press folks who use Kodak Insite to put the publication to press. They noticed on the CMY channels a white "X" strangely going from corner to corner on the pages. They eliminated it on their end before going to press. Initially, the proofing pages had all content within the bleeds powerclipped to 8.5x11 and then the pages contents were extracted to create bleeds, which left the dreaded "X" behind. I've been in the biz for 30 years and using Corel exclusively since it's inception (10,000's of hours with DRAW) I understand this is the way X6 treats powerclips now and I can select "none" in the context menu to eliminate the "X"... but who da thunk it would show up in a press file!?
I'll go to wireframe mode and proof pages from now on..If I say I don't want a powerclip anymore, I don't want to jump through hoops (or a handful of mouse clicks) to remove it. Any word on this being altered in future updates/versions?
I am new to Corel 12, I am a little behind the times. I need setting up my margins and putting in my printer marks.
View 1 Replies View RelatedI have a full version of the X5 graphics suit and now I would like to install it on my notebook. However, I have only 3 GB hard disk space left, so I wanted to install X5 without the extra content. But I cannont find an option in the installer where I can switch the extra content off. It seems that it always wants to install the 6GB extra content. Required hard disk states >5GB, even when I deselect everything. Hence, I cannot continue the installer.
How can I get a minimal installation of the X5?
I have the Guidebook, that is COOL! but does Corel sell a printed content manual? I would love to have that PDF content manual as a printed book. I know it would be 414 pages but it would be cool.
View 14 Replies View RelatedIn some previous versions, when I zoom In/Out with mouse-scroll it will zoom to mouse pointer and centre to the screen itself, but in Corel draw X5, the zoom function works properly but not center to screen the mouse-pointer and document.
View 4 Replies View RelatedJust upgraded from X3 to X6. Still getting used to it, but so far so good.
On one layout, some items on a printable layer do not appear on the Print Preview. The page contains a monochrome bitmap, some text and a curve. Only the bitmap appears on the print preview, yet everything prints.
It doesn't happen with every job. Not a big deal on this job, but there will soon come a time when I need to know what will and will not print.
Some how I'm stuck on this issue; I need to save/export (pdf/jpg) a few pages which includes content outside page border. It seems to be impossible to save page content - inside the page border - only.....?
I can't remember having problem with this before....?
Using CorelDraw X5 15.2
Im trying to cut out the centre of the letter R below. Normally I break curve apart, select the centre, and trim it from the outer. I can then select the centre piece and remove it. As you can see, this has worked with the letters P & O. When I do it with the R it seems to have worked, to the point where I can even select the centre and remove it, but when I put it back over a coloured background, it is still white.
View 8 Replies View RelatedI am using CorelDRAW X4.
I would like to make the number (1) to be aligned in the center of the box, so I select all and then (Click+C & E) as in the attached file.
I noted that I got the vertical in the center, but I got the left of horizontal a little bigger. I knew that I could get it centered both horizontally and vertically by converting texts to curves. I, however, don't want to convert it to curves because I need to edit the texts.
I'm trying to find a way to do this:
Make an object (eg an hexagon), and resize it from it's center radially, by dragging a node (and not those black squares). What I got so far, is, using the pick tool, clicking on it to go to rotation mode, hold shift and ctrl, clicking on a node (eg, from a point or the middle of a side), and dragging it.
It works IF i change it's angle, but strangely, if I keep the same angle (just resizing it), nothing happens, neither it gets resized, neither i can clone it (with right mouse click). It only keeps a blue shadow of what would be the object, without doing nothing.
What I want to do with this is, for example, create a square and an hexagon inside it, allign one of it nodes with a node of the square, and resize the hexagon by draggin another node of it until it touch (using snap to objects) another side/node of the square. As I said, it can be done if I resize by the rotation, but only if I change the angle, wich is strange for me.
Am I missing something? It's really weird that I can almost do this without problems, but then nothing happens at all. I wish I could show this visually, would be way better to explain the problem.
