In some previous versions, when I zoom In/Out with mouse-scroll it will zoom to mouse pointer and centre to the screen itself, but in Corel draw X5, the zoom function works properly but not center to screen the mouse-pointer and document.
View 4 RepliesOften whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.
View 6 Replies View RelatedIn PS, if you hold the Z key and move the mouse/stylus left/right, it smoothly zooms in by small increments, and the zooming is centered on where your mouse is.
I know some will say that Draw shouldn't try to be PS or Illustrator, but this type of functionality is really nice, and it would be great to have something similar.
I have A and D mapped to zoom in/out but it seems like big zoom jumps and it's a little finicky to get the stuff on the screen you want to see at a high enough zoom level without having to use zoom tool and draw a box. To get, the positioning, I have pan once on S key, but getting a good zoom level is still a bit finicky.
Using CorelDraw X6 on Windows 8 x64, and a Kensington Expert Mouse (that's a type of trackball).
For some reason, I can't use the wheel to zoom in or out. Just doesn't work. The drivers are installed, and the wheel works fine in all other applications, but absolutely refuses to cooperate in CorelDraw X6.2 (had this issue since CorelDraw 6).
I do not know why this function does not come by default in CoreDraw: "Center mouse when zooming with mouse wheel" From my point of view is much more accurate. The default option in recent versions is a mess when zooming with wheel.Is there a reason?There are some other features that you think have no reason to be?
View 2 Replies View RelatedIf I use the scroll wheel on my mouse in X3 it changes the zoom and does not scroll.
Using the same in X5 works OK and scrolls.
How I can change a setting somewhere so that it scrolls in X3
way to alternate between zoom levels? I have wOxxOm's ZoomOutBack, which is supposed to "go to last used zoom when being invoked after zooming in" but it doesn't seem to be working for me.
View 13 Replies View RelatedI'm used to working with a zoom that increases by 10% per click below 100%, and 20% above that. Is there a way to duplicate this? Using a drop-down menu is just too slow.
View 14 Replies View RelatedIm trying to cut out the centre of the letter R below. Normally I break curve apart, select the centre, and trim it from the outer. I can then select the centre piece and remove it. As you can see, this has worked with the letters P & O. When I do it with the R it seems to have worked, to the point where I can even select the centre and remove it, but when I put it back over a coloured background, it is still white.
View 8 Replies View RelatedI am using CorelDRAW X4.
I would like to make the number (1) to be aligned in the center of the box, so I select all and then (Click+C & E) as in the attached file.
I noted that I got the vertical in the center, but I got the left of horizontal a little bigger. I knew that I could get it centered both horizontally and vertically by converting texts to curves. I, however, don't want to convert it to curves because I need to edit the texts.
I'm trying to find a way to do this:
Make an object (eg an hexagon), and resize it from it's center radially, by dragging a node (and not those black squares). What I got so far, is, using the pick tool, clicking on it to go to rotation mode, hold shift and ctrl, clicking on a node (eg, from a point or the middle of a side), and dragging it.
It works IF i change it's angle, but strangely, if I keep the same angle (just resizing it), nothing happens, neither it gets resized, neither i can clone it (with right mouse click). It only keeps a blue shadow of what would be the object, without doing nothing.
What I want to do with this is, for example, create a square and an hexagon inside it, allign one of it nodes with a node of the square, and resize the hexagon by draggin another node of it until it touch (using snap to objects) another side/node of the square. As I said, it can be done if I resize by the rotation, but only if I change the angle, wich is strange for me.
Am I missing something? It's really weird that I can almost do this without problems, but then nothing happens at all. I wish I could show this visually, would be way better to explain the problem.
is there a way to centre or align some content of a power clip after it had been dropped in without extracting the whole content and putting it back in ? Like using align and distribute but that seams not to include a relationship to the clip container.
View 14 Replies View RelatedUsing the Fountain Fill, is there any way to include the lightest shade in the center of the darker shade so as to give a curved effect to a rectangle?
View 13 Replies View RelatedI'm laying out cribbage board designs for export to .dxf. I've drawn the board holes as circles but for the dxf file what I really need is a Single Point at the center of each circle.
So, is it possible to make single points in CorelDraw X4? If so, is there a way I can put a single point in the center of 300 holes at once?
when I select an object there is a little x that shows the center of the object, useful when trying to locate an object in an exact spot. The x is black and sometimes it is difficult to see where it is on a dark background, so is there a way to change the color of this x?
View 6 Replies View RelatedI need to move the edge of an object without affecting the center of that object. Is there away to achieve this.
View 5 Replies View Relatedthe best way I can create writing in the center of this heart in the sand?
[URL]
Trying to get the words Ocean City in 2 lines and have it look as close as possible to look like it was written in the sand (without me having to drive an hour to the beach and make one myself and photograph it) although it is tempting to do!
I have two adjacent circles. I created two tangent lines between them on opposite sides. I want to connect the lines to the circles. So - I make the circle into a pie, and with the node editing tool, drag the nodes around until I see the little info text go from edge to "node" where it snaps on the nope of the line.
Before I start this, the lines are perfectly tangent. When complete, the lines are no longer tangent and the circle is shifted upwards, and is moved off the perfect tangent by different amount for each line. I can see a difference at 3200% and 11000% zoom at 0.5 point lines.
This occurs if I rotate the circle, or make the circle into an arc also.
It seems that when the circle is drawn, the center point about which its rotated, and from where the arcs/pies are drawn is not exactly center. This is happening when I manually rotate it. It I rotate it giving it a specific degree in the properties bar across the top, it rotates fine. For instance, repeating this again, the arcs of the circle is below one line, and above the other live by a lesser degree.
I was just fooling around with it one day and I made 2 guidlines intersect (one at 0 degrees and one at 90). I added a third one at 45 and tried to center it at the intersection of the first 2. It made a tiny tiny microscopic right triangle for some reason.
Also, sometimes the center is off on either the object or on the page. Like when I rotate copies of an object around another object (like making a clock face) the copies don't go perfectly all the way around. I redo it and it works fine.
Is precision an issue in CoreDRAW?
In X5 is there a way to change the size of the centre 'white' spot when using transparency or is it always proportional to the object size?
View 3 Replies View RelatedI'm creating a logo that consists of the word DIFFERENT in text and a shape, a dot (an ellipse) that I want to appear above the I and be vertically aligned with I.
How can I do this?The problem is that I can't see how to identify the point in the text - the centre of the I - to act as the target. I can't seem to get any of the Snap to Object tools to work.
I feel that I should be able to mark a specific point anywhere on a shape or an object and use those points to align.
I suspect that I could achieve the effect that I want by splitting the text characters up into individual objects, than I can align them more obviously but then I set up some other issues with kerning.
I have become very attached to having the mouse scroll wheel 'auto center the view at the cursor point' when I scroll in and out...I am not too happy with the new 'hold the wheel down and move the screen position' feature on x6. Can the old wheel configuration/centering be activated in x6?
View 5 Replies View Related1. find the attached “Rays on Oval.png” file. (Tried attaching .cdr file but the File Size is 400KB.)
2. I would like to Repeat / Duplicate that Black Color on Outer Path of Oval Shape. (Like shown in the Yellow versus Black. The Yellow is a Circle and the Black is from Star Tool)
3. I think the Best Bet would be to Link the Rays to the Outer Path of Oval Shape.
4. I need the Rays and Oval as 2 Different Objects so that I could Change the Color Scheme.
why (sometimes) when I export text or graphics as .eps files to my cutter it cuts the same outline up to four to five times and ends up cutting right through the backing paper. I have been using postcut with various corel editions since 1997 with no problems until recently. It also cuts random lines through lines of text which is such an expensive pain in the ass.
I started to use the production manager in flexi sign to cut my designs and same thing happens, except for the random lines but it will make up to five cuts on some objects. All text and graphics are exported the same. Has something in corel newer versions changed in relation to this?
We are having a big problem with dropping lines of text or parts of graphics. It is happening on 3 different laser systems and 2 different printers.
View 14 Replies View Relatedi´m using CRD since X3 so I think i´m quite experienced with all the crashes and uncompatibilities but now I have a problem which I can´t solve.
I made a graphic project which is quite large (2,6m x 2,0m @ 300dpi) and including raster grahics. The CDR file itself has about 400MB. When I tried to export this graphic to the png or jpg at the current size Corel X5 always crashes. I tried almost everything on many computers but always the same problem.
It looks like the project is too large for export. At this moment I desperately need to export the file to jpg or png at full resolution. Maybe X6 is more stable when exports or I have to simplify the project somehow but...
FILE IS UPLOADED here and I need to have it 2,6m x 2,0m: [URL]
I have a 900 x 500 px image in Adobe Illustrator, which overlaps a bit the canvas on the left side.
When I open this file with Corel, it adjusts my graphics so that it's centered on the screen. The AI file is centered on another point. Also, the canvas Corel creates is A4 sized. I always have to resize the canvas and then manually adjust the position of my graphics.
Question: How can I save an AI file so that when I open it at Corel, the position and size of the canvas will be exactly the same?
Entire Corel suite freezes on start up - I cannot do anything. Reinstalling also does not work - suddenly buttons on the installer dissapeared - there is no text on them and when I click them nothing happens.
A week ago I have installed service pack 3 and everything worked fine. It has all gone wrong again. And installation of the latest patches does not work anymore.
I am running Windows 7 64-bit and I've got a feeling that is must have something to do with system updates.
I often create graphics in CorelDRAW export it and inserting it into my MS Word documents and finally convert my documents to pdf. When it is vector graphics, exporting as EPS works fine: The increase in file size is small and lines are displayed perfect independant of how much you zoom in the final pdf document. When I handle bitmaps, I usually export as JPG (or PNG), which works well too. My problem arise when I have a mixed vector and bitmap image. I have imported a bitmap into CorelDRAW and created some lines on top of it. I want to export it as a whole. If I export as EPS, the final result is fine, but filesize has increased considerable. If I choose to export as jpg, the filesize is fine, but the lines are getting slightly blurry. Is there a way to get the best of both Worlds - resonable filesize and perfect lines? Maybe settings in some dialog??
View 7 Replies View RelatedHow on earth do you export bitmaps cropped to the size of the canvas? This seems like the simplest functionality ever but i can't get it to work. For example, I am designing an advert for use online. It needs to be 600px wide x 150px high. I may want to use a background image or a photo that when placed goes beyond the edge of the canvas. Logic dictates i would only want to export the canvas with a web image (otherwise why would i have set an exact number of pixels.) However, Corel insists on exporting everything on the canvas and desktop. Surely it should allow us to choose the bounding area of the exported bitmap.
Just to clarify what I mean, i've included a screen shot showing and example original graphic and the export result. I'm sure there must be an easy way to do this. If it's one like this i can crop it easily, but sometimes a print customer will ask me to send them, for example, a 32pp booklet we have designed for them with each page as a JPG and to crop each one manually is a right pain.
X5 Recently have begun missing parts of print out. Tried to duplicate but appears completely random.
Output to both Full colour laser and Wide Format printers will miss either text or part of objects. Today printed the text but not the text effects. Initially closed and reopened, rebooted, However this has become a now daily feature so regardless tried reprint from the same screen so next print has everything included.
Very costly and time consuming - print preview shows all correct but output is not the same.
Running Win 7 64bit 8GB Ram