I do not know why this function does not come by default in CoreDraw: "Center mouse when zooming with mouse wheel" From my point of view is much more accurate. The default option in recent versions is a mess when zooming with wheel.Is there a reason?There are some other features that you think have no reason to be?
View 2 RepliesUsing CorelDraw X6 on Windows 8 x64, and a Kensington Expert Mouse (that's a type of trackball).
For some reason, I can't use the wheel to zoom in or out. Just doesn't work. The drivers are installed, and the wheel works fine in all other applications, but absolutely refuses to cooperate in CorelDraw X6.2 (had this issue since CorelDraw 6).
If I use the scroll wheel on my mouse in X3 it changes the zoom and does not scroll.
Using the same in X5 works OK and scrolls.
How I can change a setting somewhere so that it scrolls in X3
I'm using CS6 on windows 7-64bit with a keyboard and a mouse. I have a problem with the default functionality of the "Alt" key in windows 7. For those of you that are familiar with the default functionality of the alt key in windows 7, please skip to the next paragraph. For those of you not familiar, pressing the alt key in most programs in windows will highlight the toolbar so that you can use the keyboard to make selections within your "File", "Edit", "View", etc. toolbars if your mouse goes dead.
My problem is that I use the Alt + Mouse Scroll for zoom all the time. I rely on that feature probably more than I should. Yes, I could use cntrl + or cntrl - for zoom but that means I have to take my right hand off my mouse and I use photoshop 8+ hours a day some days. Time is of the essence to complete projects by the deadline.
I've tried disabling the default alt function in windows 7 (didn't work because you can't without third pary openware). I've tried duplicating the shortcut in the Edit - Keyboard Shortcuts menu (didn't work because it doesn't recognize the mouse scroll).
I never use horizontal and vertical scrolling with the mouse wheel
I always Zoom
But I am forced to hold ALT down every time ...
I want mouse wheel to Zoom by default ...
Often whatever I'm working on in X4 disappears off the document page when I zoom in or out. It's still there (I can see it in the print preview)and I can print it, but I can't see it no matter what view (e.g., normal, draft, etc.) I select. If I select the entire page I can see the graphic and text handles, but nothing else. The only way I can see my work again is to save it, close the program, and then re-open the file. My computer is a Dell Precision Work Station T3400 running Vista Ultimate with an Intel Core2 Quad CPU, 4GB RAM, and my graphics card is an NVIDIA Quadro FX 570 256MB. All my software and drivers are up to date. The problem occurs no matter what screen resolution or refresh rate I'm using.
View 6 Replies View RelatedIn PS, if you hold the Z key and move the mouse/stylus left/right, it smoothly zooms in by small increments, and the zooming is centered on where your mouse is.
I know some will say that Draw shouldn't try to be PS or Illustrator, but this type of functionality is really nice, and it would be great to have something similar.
I have A and D mapped to zoom in/out but it seems like big zoom jumps and it's a little finicky to get the stuff on the screen you want to see at a high enough zoom level without having to use zoom tool and draw a box. To get, the positioning, I have pan once on S key, but getting a good zoom level is still a bit finicky.
In some previous versions, when I zoom In/Out with mouse-scroll it will zoom to mouse pointer and centre to the screen itself, but in Corel draw X5, the zoom function works properly but not center to screen the mouse-pointer and document.
View 4 Replies View RelatedI am using Corel Draw X4 to create stuff to cut on a laser engraving system and am having trouble with the bitmap trace function. For example: I create a line of text. First, I convert it to a bitmap. Then I trace the bitmap using the logo option. After doing this, when I move the text on the page, it appears several of the letters (the tall ones like capital letters and so forth) are missing during the moving process, but when I stop moving it, they appear again.
My problem is when I save the file and then open it in my laser program, these missing letters that are present when I move the text in corel draw translate into missing letters in the laser program, so it seems this is a Corel Draw problem but I don't know how to get rid of it.
I've noticed that DRAW seems to forget whatever settings I choose for duplicate.
So, I found the following in the index:
"Copying objects quickly. You can use other methods to create copies of objects quickly, without using the Clipboard. You can use the plus sign (+) on the numeric keypad to place a copy of an object on top of the original object, or you can create copies instantly by pressing the Space bar or right-clicking while dragging an object."
The + sign thing is cool. Wish I had known. But the Space bar drag either doesn't work at all or puts down one copy at what is apparently a set distance from the original, and then a second copy wherever I release the mouse button. ? Win7, DRAW X6.
I am using Windows7 (64 bit) machine and CorelDRAW X6 (64 bit) software and also installed HP 5610 all-in-one scanner / printer but i noticed in CorelDRAW X6 / Corel PP x6 acquire image >> select source... and acquire.. are disable.
it is bug or need some more software to enable for CorelDRAW x6 because HP 5610 Scanner work with other software.
How do I get a normal brush or spray function? Now, when I release the mouse button, the lines turn into a fancy balloon image. I know that comes from the Brush Stroke List or the Spraylist File List, but how do I turn those functions off?
View 6 Replies View RelatedHolding a key modifies the fucntion of a macro.
Ie hold shift and run the macro and it does this, hold Crtl and it does this... etc.
A great way to make your macros multi functional.
I also lightly touch base on Option Explicit which makes variable declaration necessary.
I also quickly talk about If, Else, ElseIf conditionals and colors.
cs_setInnerHtml('video_1fe653b0-6c53-496f-958e-232be40194bb','');
Option Explicit#If VBA7 Then Private Declare PtrSafe Function GetAsyncKeyState Lib "user32" (ByVal vKey As LongPtr) As Integer#Else Private Declare Function GetAsyncKeyState Lib "user32" (ByVal vKey As Long) As Integer#End If'Private Const VK_ESCAPE = &H1B'Private Const VK_RETURN = &HDPrivate Const VK_SHIFT = &H10Private Const VK_CONTROL = &H11Sub makeRect() Dim s As Shape, sRect As Shape Dim x As Double, y#, h#, w# Dim dMarg# Dim col As New Color If GetAsyncKeyState(VK_SHIFT) Then dMarg = 0.25 col.RGBAssign 255, 0, 0 ElseIf GetAsyncKeyState(VK_CONTROL) Then dMarg = 0.25 col.RGBAssign 255, 0, 0 Else dMarg = 0.1 col.RGBAssign 0, 0, 255 End If ActiveDocument.Unit = cdrInch Set s = ActiveShape If s Is Nothing Then Exit Sub 's.GetBoundingBox x, y, w, h myGetBoundingBox s, x, y, w, h Set sRect = ActiveLayer.CreateRectangle2(x - dMarg, y - dMarg, w + (dMarg * 2), h + (dMarg * 2)) sRect.Fill.UniformColor.CopyAssign col sRect.OrderToBack End SubPrivate Function myGetBoundingBox(ByVal s As Shape, ByRef x As Double, y#, w#, h#) h = s.SizeHeight w = s.SizeWidth ActiveDocument.ReferencePoint = cdrBottomLeft x = s.PositionX y = s.PositionYEnd Function
All of a sudden my Copy Function quit working in Corel x5.
I can copy from other programs and paste into Corel, but I cannot copy from one file to another file (or the same file even) within Corel.
I was told it could be a possible update from Windows 7 causing it and that I need to reinstall my software.
way to alternate between zoom levels? I have wOxxOm's ZoomOutBack, which is supposed to "go to last used zoom when being invoked after zooming in" but it doesn't seem to be working for me.
View 13 Replies View RelatedI'm used to working with a zoom that increases by 10% per click below 100%, and 20% above that. Is there a way to duplicate this? Using a drop-down menu is just too slow.
View 14 Replies View RelatedI have a question about using the outline trace function and resolution of images.
Say for instance, I am trying to create an existing logo for a customer in which I have to pull the image off the internet. I am unable to find an image that is high resolution, so I pick one with a lower resolution, because after all, I am going to trace the logo to cut out on my cutter with a heat transfer application. It is a simple design, a heart for instance. So when I use Corel Trace, no matter how small beforehand I make said heart, when it traces it comes out jagged, like the pixelation you see on a low res image. Is there any way to smooth this out? Or do I just need to look harder for a higher res image?
complete Corel X4 uninstall 3 times already .... even went so far as to reboot the registry to a date before I installed Corel X4 Suite to no avail.
The program has had no issues until the last 2 weeks. The actual issue I am having is Paint works fine as a separate entity however when I try to edit a bitmap from within X4 an error pops up telling me "Failed to launch server application" This is a major PITB as I own a graphics company and this is causing no end of problems
How to get back to the old way to zoom in CorelDRAW? In version X5 the zoom function doesn't work as i did in earlier versions. I want the view to center to where I have the cursor when I zoom in or out.
View 6 Replies View RelatedI am working on getting some settings done, moving from 2008 to 2012. How do you set the Middle Mouse Button (wheel) to either Zoom All or Zoom Extents when you double click it? I thought it was set in the Main CUI file.
View 9 Replies View RelatedOccasionally when I try to zoom with the mouse wheel it just won't let me to. I have to pan around and then it'll let me zoom again. That's extremely irritating. I've never encountered such problem in previous versions of Max. I have the service pack and both hotfixes installed.
View 5 Replies View RelatedIs there a way to change the zoom on the mouse wheel? Currently to zoom out I scroll toward myself. I would like it to be the opposite since other programs I use are set up in this fashion. It would be easier if all were the same.
View 1 Replies View RelatedI recently reinstalled Photoshop 8 and I used to use my mouse wheel to zoom images, now it does not work?
View 2 Replies View RelatedWhile I most definitely love the addition of "alt-right-click-drag" for resizing the brush in CS6 Liquify , I must say I greatly feel the loss "alt-mouse-wheel" for zooming in and out.
(Alt-mouse-wheel is much better than ctrl-left-click zooming because you didn't have to go down to the zoom pop-up or ctrl-right-click to bring up the zoom dialog to go back to 100% or fit image.)
If it was brought back, then brush resizing and zooming in and out is all under the Alt key -
I found an annoying bug using photoshop cs6 with win 8 pro.
It only happens when i'm working on a file with layer. When I zoom in or out with the mouse wheel the background suddenly changes from gray to black or "trasparent" multiple times.
Already tried updating vga drivers and disabling gpu acceleration, with no results.
Out of the blue, my zoom on my middle wheel slowed down. So, now I have to spin my wheel at least 20 more times when I zoom in. The problem only occurs in Civil 3D not any other programs. How to fix my zoom?
View 2 Replies View RelatedIs there a setting to control the speed of the mouse wheel zoom?On the model I'm working on, it takes about 8 scrolls to go from "forestview" to "tree view", and I would like to do it in 2-3 if possible.
View 6 Replies View RelatedHow do you set the wheel click to zoom into all of your drawn objects instead of the drawing limits?
View 1 Replies View RelatedI have a CAD 2013 Arch user who is having a strange issue with zooming in or out using the mouse scroll wheel. It doesn't happen all the time which frustrates me because I never see it, but she does. Every now and then when she's working in a drawing she'll try to zoom out slightly, but the it zooms WAY out, so much that the drawing looks like a tiny speck. When she tries to correct it by zooming in, it zooms WAY in. Then for some reason, it starts working fine. This seems to happen to her multiple times a day and I'm sure what to or how to troubleshoot this. She's using a wireless mouse from Logistic and seems to have the current drivers installed.
View 1 Replies View RelatedI just re-installed Inventor 2014 on my computer.
Goto your Tools menu.
Select Application Options.
Click on the Display tab.
Under 3d Navigation section (very bottom), click the checkbox for Reverse Direction.
Windows 8.1 Pro 64-bit
Intel i7 870 @ 2.93 GHz
Nvidia GeForce 580 GTX 1536MB GDDR5
8 GB Ram
250GB HDD
How to change the zoom in and out behaviour of the middle mouse wheel in Windows GIMP to work without having to press the ^ (control) button on the keyboard? I'm using to zooming in and out using just the mouse wheel alone and hoping that a setting in GIMP could be changed so that it also works without pressing the ^ (control) button at the same time.
I've googled this along with a few other things over last couple of days but no luck. Can this be done?