CorelDRAW Graphics Suite 12 :: Using Outline Trace Function / Resolution Of Images
Dec 14, 2012
I have a question about using the outline trace function and resolution of images.
Say for instance, I am trying to create an existing logo for a customer in which I have to pull the image off the internet. I am unable to find an image that is high resolution, so I pick one with a lower resolution, because after all, I am going to trace the logo to cut out on my cutter with a heat transfer application. It is a simple design, a heart for instance. So when I use Corel Trace, no matter how small beforehand I make said heart, when it traces it comes out jagged, like the pixelation you see on a low res image. Is there any way to smooth this out? Or do I just need to look harder for a higher res image?
I am using Corel Draw X4 to create stuff to cut on a laser engraving system and am having trouble with the bitmap trace function. For example: I create a line of text. First, I convert it to a bitmap. Then I trace the bitmap using the logo option. After doing this, when I move the text on the page, it appears several of the letters (the tall ones like capital letters and so forth) are missing during the moving process, but when I stop moving it, they appear again.
My problem is when I save the file and then open it in my laser program, these missing letters that are present when I move the text in corel draw translate into missing letters in the laser program, so it seems this is a Corel Draw problem but I don't know how to get rid of it.
I design t-shirts and one of our biggest customers sells signature shirts. Below is an example of the problem I'm having. The second image is the original and the first one is what happens after I convert to a bitmap and outline trace.
There are always at least 2-3 names with missing letters or filled in letters. I've adjusted the detail etc while tracing but doesn't seem to work. I'm on the verge of losing a very important customer. We've also had to redo several orders because the "glitch" wasn't caught before production.
I am running a Windows XP machine with Corel Draw X6 (32 Bit) and under the Trace Bitmap option, Quick Trace will work but anything under the Centerline Trace and Outline Trace options will upset Corel Draw and freeze. The program does not say "Not Responding" but no functions will work or the mouse will not change cursor and the only way to exit is to end the task.I have run updates on the program and upgraded to X6.1 but with no luck, still the same issue.
Whenever I use the Trace option to convert, the result is an image filled with closed objects. Because I use vector images with a laser machine, and because the laser cuts everything it reads, the "double" lines (shared lines of the objects) get cut as many times as they appear. So I have to go in and break apart and delete segments & this goes on for days. I've tried welding, but welding makes one of the objects disappear completely. I've tried changing from cdr to svg, exporting & importing, hoping it would simplify, but that doesn't work either. Is there a way to have the bitmap converted to simple lines instead of overlapping objects?
My problem concerns about shadows of outline In fact, I want to create a soft, shaded border. Effect which I want to achieve can be seen in the picture below, basically it is a design of an soccer jersey.
I tried drop shadow technique but the result is too large and inaccurate shadow. Also, I tried to create an custom artistic media brush, but the result is not as I expected. Is it out of a job that Corel can perform ?
On the bottom page the outline box has a white vertical square/line on the right of it. Since this happened my outlines are transparent when place on top of other objects. How can I fix this to get it back to soid colored lines.
I need to outline this, and really don't want to have to trace the whole thing. What I have been doing with the rest of this persons design is duplicating it, getting just an outline by getting rid of whatever isn't needed. Making it a wide outline and then doing create outline to object, getting rid of extra inner lines, and then I have the outline (cut line) that I need. The computer is saying that this one is too much for it to do that.
I have to make it a tiny jpg in order to upload here. The original is made out of MANY lines, but I have a vectorized outline that fits it, but not an outline that is like 1/8 or 3/16 inches all the way around it. It is being cut out to go on vehicle doors, trailers, etc. The details are way too small to have it cut right up to it.
Looking to see if corel has any way to scale an open outline along its path from one size to another. So for example a curvy open ended line would start with a stroke of 2 pt and end with a stroke of 20 pt?
I use Corel Draw X6.4 on a 64-bit Windows 7 PC, but since the first installation of Corel Draw X6 I have following problem:
I use millimeters as metric scale and when I create any object, the object manager states that the outline width of that object is set to 2 mm, but it is obvious that the width is only 0.2 mm. Now if I try to change the outline width to 1 mm, Corel draws the outline with a width of 10 mm instead and the object manager says that the width is even 100 mm. To solve that problem I always have pressed the Undo-button, so the width changes to the desired 1 mm but the object manager still tells me that the width is 10 mm.
Is there a way of scaling the "outline" when scaling the image... automatically? It seem that this has to be checked in the "Outline Pen" dialogue box every time you add an "outline" to an image.......and it starts to become a tedious task if you forget to do that to an entire project.
That just happened to me with 30 different images. I had to go back and "check" the box to every single outline.
When I create something with an outline, the outline will increase or decrease in thickness as I resize the image. So if I have something at say 10" X 10" at 4pt outline, when I resize it to 2" X 2" the outline is like 5X thicker and messes everything up.
Is there a way to combine or something with a vector so the outline auto changes or never changes thickness when resizing the graphic?
I am trying to place my cut outline on my image. I have turned the image from a jpeg to a bitmap but am still having trouble placing the cut line on it.
When you size the outline of an object on your properties bar to say "4.0pt.". And check "size with image" in "Object properties" docker
And when you either expand or contract your image...shouldn't your "Object Properties" docker show the size of the outline relative to the size of the outline when you expand or contract your image.
Example: outline is 4.0pt. on object........when expanded to a size bigger the outline is let's say 8.234pt. In the "object Properties" docker the outline says 4.0pt. Shouldn't it show "8.234pt. as well?
I do not know why this function does not come by default in CoreDraw: "Center mouse when zooming with mouse wheel" From my point of view is much more accurate. The default option in recent versions is a mess when zooming with wheel.Is there a reason?There are some other features that you think have no reason to be?
I've noticed that DRAW seems to forget whatever settings I choose for duplicate.
So, I found the following in the index:
"Copying objects quickly. You can use other methods to create copies of objects quickly, without using the Clipboard. You can use the plus sign (+) on the numeric keypad to place a copy of an object on top of the original object, or you can create copies instantly by pressing the Space bar or right-clicking while dragging an object."
The + sign thing is cool. Wish I had known. But the Space bar drag either doesn't work at all or puts down one copy at what is apparently a set distance from the original, and then a second copy wherever I release the mouse button. ? Win7, DRAW X6.
I have noticed that when i make changes to line widths in a drawing using the outline pen, the printed output does not change until i make at least a change of .005". changing it by less than this only changes it on the display.
I have a question regard removing the outline from a portion of an object or making that portion invisible and still fill the object in its original shape Say for instance I have a circle or a rectangle and I converted them to a curve. I want to be able to make part of the outline invisible and still fill it in its original shape.
Let's say I have a letter 'B' and I want to create an outline on the outer boundary only and not the inner boundary i.e. the two small 'D', how can I achieve that?
I want to create some text that has a outline but with a little bit of space in between the text and the outline. What is the best way to do this?
Usually, I will create text and add an outline. Then convert the outline to an object and change the color to whatever the background color of the document is. Then I will add an outline to that object (the one that used to be the text outline) and I end up with essentially two outlines.
It usually isn't that difficult but sometimes the text does not cooperate and when I add an outline it has all kind of gaps and points. So I guess I have two questions. why certain texts have those gaps and points when you try to outline them? Also, is there any easier way to make an outline that is not directly against the text like this.
I am using Coreldraw 6X on a trial basis ( my previous cad is all mechanical/ 3D based such as autocad and 123D). I have a problem with an object which is basically an outline of an animal in CDR format, and cannot find a way to fill in the outline areas.
I would like to mark the outline of an object with a dotted line/ the outline should be a dotted line to show that this object can be cut out. But I see only where to choose the thickness of a line.
Use CorelDraw X for laser engraving? I did have X3 and just changed to X5 and need to cut Ovals in Flexi Brass and the file engraved fine, but did not vector cut the Red outline.
