When I create something with an outline, the outline will increase or decrease in thickness as I resize the image. So if I have something at say 10" X 10" at 4pt outline, when I resize it to 2" X 2" the outline is like 5X thicker and messes everything up.
Is there a way to combine or something with a vector so the outline auto changes or never changes thickness when resizing the graphic?
Is there a way in CorelDRAW, that the resize option, the one we do by pulling all the arrows from the corners, offsets the objects equally. If I copy paste and resize the rectangle it does unequal offsets. I know the contour command, but is there any way to customize the resize command?
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
Once upon a time a professional told me to import images to corel in the correct resolution and not to downsize them within corel because the quality will be worse then. Is this really true? Or is it no problem to downsize any image or upsize an image that has a big DPI?
View 9 Replies View RelatedMy problem concerns about shadows of outline In fact, I want to create a soft, shaded border. Effect which I want to achieve can be seen in the picture below, basically it is a design of an soccer jersey.
I tried drop shadow technique but the result is too large and inaccurate shadow. Also, I tried to create an custom artistic media brush, but the result is not as I expected. Is it out of a job that Corel can perform ?
On the bottom page the outline box has a white vertical square/line on the right of it. Since this happened my outlines are transparent when place on top of other objects. How can I fix this to get it back to soid colored lines.
View 14 Replies View Relatedcroatian chicken for forum.jpg
I need to outline this, and really don't want to have to trace the whole thing. What I have been doing with the rest of this persons design is duplicating it, getting just an outline by getting rid of whatever isn't needed. Making it a wide outline and then doing create outline to object, getting rid of extra inner lines, and then I have the outline (cut line) that I need. The computer is saying that this one is too much for it to do that.
I have to make it a tiny jpg in order to upload here. The original is made out of MANY lines, but I have a vectorized outline that fits it, but not an outline that is like 1/8 or 3/16 inches all the way around it. It is being cut out to go on vehicle doors, trailers, etc. The details are way too small to have it cut right up to it.
In Coreldrawx6 64bit when i resize the font, change the font in another type. How is possible this? This problem is typing measure in top toolbar, not if i resize manually. I post a sequence about this problem.
Figure 1) The text CdC is a Courier10 BT and Laboratory i Clarendon BT
Figure 2) I change measure in top and fonts change all graphic.
What causes corel to crash when resizing or nudging text? And is there a way to prevent this. We are running X5 with newest SP. On brand new windows 7 64bit Quad Core AMD, 6GB ram.
View 8 Replies View RelatedI'm working with drawings that have (for example) 1,000 little circles with diameter 1.5mm. I'd like to resize all of them to, say, 2.0mm but I don't want to scale them as this will affect their distance from each other.
Macros: I have tried recording the adjustments on one object but I'm unable to run the macro on another - the macro errors out.
Find/Replace objects: I don't see any options involving object dimensions (although I can "Find All" of my objects by shape or fill).
Corel Draw X4 v14.0.0.701
I have a quick question corel X5, I have a design made of several .4 inch circles, I wonder if there is a way to resize all the circles to .6 inch ( i am trying to avoid to resize manually each circle )
View 14 Replies View RelatedLooking to see if corel has any way to scale an open outline along its path from one size to another. So for example a curvy open ended line would start with a stroke of 2 pt and end with a stroke of 20 pt?
View 1 Replies View RelatedI use Corel Draw X6.4 on a 64-bit Windows 7 PC, but since the first installation of Corel Draw X6 I have following problem:
I use millimeters as metric scale and when I create any object, the object manager states that the outline width of that object is set to 2 mm, but it is obvious that the width is only 0.2 mm. Now if I try to change the outline width to 1 mm, Corel draws the outline with a width of 10 mm instead and the object manager says that the width is even 100 mm. To solve that problem I always have pressed the Undo-button, so the width changes to the desired 1 mm but the object manager still tells me that the width is 10 mm.
Is there a way of scaling the "outline" when scaling the image... automatically? It seem that this has to be checked in the "Outline Pen" dialogue box every time you add an "outline" to an image.......and it starts to become a tedious task if you forget to do that to an entire project.
That just happened to me with 30 different images. I had to go back and "check" the box to every single outline.
I am trying to place my cut outline on my image. I have turned the image from a jpeg to a bitmap but am still having trouble placing the cut line on it.
View 6 Replies View Relatednumber 3.jpg
How would I put an outline around a number with a space between the number and outline?
When you size the outline of an object on your properties bar to say "4.0pt.". And check "size with image" in "Object properties" docker
And when you either expand or contract your image...shouldn't your "Object Properties" docker show the size of the outline relative to the size of the outline when you expand or contract your image.
Example: outline is 4.0pt. on object........when expanded to a size bigger the outline is let's say 8.234pt. In the "object Properties" docker the outline says 4.0pt. Shouldn't it show "8.234pt. as well?
Although I select inside an outline box, the outline box always seems to select. how to disable this?
View 3 Replies View RelatedAfter intalling my new mouse (Logitech Corded Mouse M500) scrolling/resizing makes the image disappear in a short time 2-3 minutes. I read about it in older versions, only happens with this mouse.
How can I fix it? I've just brought the mouse, seems very good, the older one is unuseable (lacks accurancy due the cheap IR sensor).
I have noticed that when i make changes to line widths in a drawing using the outline pen, the printed output does not change until i make at least a change of .005". changing it by less than this only changes it on the display.
View 2 Replies View RelatedI have a question regard removing the outline from a portion of an object or making that portion invisible and still fill the object in its original shape Say for instance I have a circle or a rectangle and I converted them to a curve. I want to be able to make part of the outline invisible and still fill it in its original shape.
View 7 Replies View RelatedLet's say I have a letter 'B' and I want to create an outline on the outer boundary only and not the inner boundary i.e. the two small 'D', how can I achieve that?
View 5 Replies View RelatedI want to create some text that has a outline but with a little bit of space in between the text and the outline. What is the best way to do this?
Usually, I will create text and add an outline. Then convert the outline to an object and change the color to whatever the background color of the document is. Then I will add an outline to that object (the one that used to be the text outline) and I end up with essentially two outlines.
It usually isn't that difficult but sometimes the text does not cooperate and when I add an outline it has all kind of gaps and points. So I guess I have two questions. why certain texts have those gaps and points when you try to outline them? Also, is there any easier way to make an outline that is not directly against the text like this.
I am using Coreldraw 6X on a trial basis ( my previous cad is all mechanical/ 3D based such as autocad and 123D). I have a problem with an object which is basically an outline of an animal in CDR format, and cannot find a way to fill in the outline areas.
View 4 Replies View RelatedI would like to mark the outline of an object with a dotted line/ the outline should be a dotted line to show that this object can be cut out. But I see only where to choose the thickness of a line.
View 1 Replies View RelatedUse CorelDraw X for laser engraving? I did have X3 and just changed to X5 and need to cut Ovals in Flexi Brass and the file engraved fine, but did not vector cut the Red outline.
View 10 Replies View RelatedIn corel draw x6 how can i create outline width that starts exactly from outside.
View 15 Replies View Relatedfound any outline world maps truly editable in Draw? I have imported some from other formats but none worked all that well.
View 3 Replies View RelatedURL....On that image, I want to adjust the tickness of the thin white line.There is only 1 contour step.
View 2 Replies View RelatedHow To i Make Black Outline Inside And Outside Of Thease Styles With Corel Draw ?
And Then I Want To Remove Gray Color Only Need Black Outlines
I am using Corel Draw X3 on windows XP
I have clicked something which has removed the fill and outline properties of an object which appeared at the bottom task bar.
A little paint brush told me the fill colour and a pen told me the outline properties.
How do I get them back?
I am drawing pictures for the Second life game. I need that the file I export to be exactly 512 X 512 pixel, and TGA format. Of course, the objects in the picture are small, and don't use al the 512X512 space.But even when objects don't use all the space, I need my "small objects within the 512X512 size file.
Although my picture is, in corel draw 512 X 512, when I export to TGA , I have no the good results.I use yhe File/export/menu and define TGA Bitmap for format.
On the following menu,
if I click on "Maintain original size", Objects remains with original size, but the file size is reduced to fit around the objects..
If I click on "Maintain aspect ratio",, I can fix the size file to 512X512, , but the objects are streched to fill the 512X512 file.
The only way I found to avoid resizing is adding a 512X512 transparent object on the background, but I wonder if there is a better way to do it.