Is there a way to change the zoom on the mouse wheel? Currently to zoom out I scroll toward myself. I would like it to be the opposite since other programs I use are set up in this fashion. It would be easier if all were the same.
View 1 RepliesHow to change the zoom in and out behaviour of the middle mouse wheel in Windows GIMP to work without having to press the ^ (control) button on the keyboard? I'm using to zooming in and out using just the mouse wheel alone and hoping that a setting in GIMP could be changed so that it also works without pressing the ^ (control) button at the same time.
I've googled this along with a few other things over last couple of days but no luck. Can this be done?
I never use horizontal and vertical scrolling with the mouse wheel
I always Zoom
But I am forced to hold ALT down every time ...
I want mouse wheel to Zoom by default ...
I am working on getting some settings done, moving from 2008 to 2012. How do you set the Middle Mouse Button (wheel) to either Zoom All or Zoom Extents when you double click it? I thought it was set in the Main CUI file.
View 9 Replies View RelatedIs there a setting to control the speed of the mouse wheel zoom?On the model I'm working on, it takes about 8 scrolls to go from "forestview" to "tree view", and I would like to do it in 2-3 if possible.
View 6 Replies View RelatedI have a CAD 2013 Arch user who is having a strange issue with zooming in or out using the mouse scroll wheel. It doesn't happen all the time which frustrates me because I never see it, but she does. Every now and then when she's working in a drawing she'll try to zoom out slightly, but the it zooms WAY out, so much that the drawing looks like a tiny speck. When she tries to correct it by zooming in, it zooms WAY in. Then for some reason, it starts working fine. This seems to happen to her multiple times a day and I'm sure what to or how to troubleshoot this. She's using a wireless mouse from Logistic and seems to have the current drivers installed.
View 1 Replies View RelatedI just re-installed Inventor 2014 on my computer.
Goto your Tools menu.
Select Application Options.
Click on the Display tab.
Under 3d Navigation section (very bottom), click the checkbox for Reverse Direction.
Windows 8.1 Pro 64-bit
Intel i7 870 @ 2.93 GHz
Nvidia GeForce 580 GTX 1536MB GDDR5
8 GB Ram
250GB HDD
if you can customize / move tool bars & zoom in/out using mouse wheel with AutoCAD 2012 LT ?
View 5 Replies View RelatedOccasionally when I try to zoom with the mouse wheel it just won't let me to. I have to pan around and then it'll let me zoom again. That's extremely irritating. I've never encountered such problem in previous versions of Max. I have the service pack and both hotfixes installed.
View 5 Replies View RelatedI recently reinstalled Photoshop 8 and I used to use my mouse wheel to zoom images, now it does not work?
View 2 Replies View RelatedI'm using CS6 on windows 7-64bit with a keyboard and a mouse. I have a problem with the default functionality of the "Alt" key in windows 7. For those of you that are familiar with the default functionality of the alt key in windows 7, please skip to the next paragraph. For those of you not familiar, pressing the alt key in most programs in windows will highlight the toolbar so that you can use the keyboard to make selections within your "File", "Edit", "View", etc. toolbars if your mouse goes dead.
My problem is that I use the Alt + Mouse Scroll for zoom all the time. I rely on that feature probably more than I should. Yes, I could use cntrl + or cntrl - for zoom but that means I have to take my right hand off my mouse and I use photoshop 8+ hours a day some days. Time is of the essence to complete projects by the deadline.
I've tried disabling the default alt function in windows 7 (didn't work because you can't without third pary openware). I've tried duplicating the shortcut in the Edit - Keyboard Shortcuts menu (didn't work because it doesn't recognize the mouse scroll).
I found an annoying bug using photoshop cs6 with win 8 pro.
It only happens when i'm working on a file with layer. When I zoom in or out with the mouse wheel the background suddenly changes from gray to black or "trasparent" multiple times.
Already tried updating vga drivers and disabling gpu acceleration, with no results.
If I use the scroll wheel on my mouse in X3 it changes the zoom and does not scroll.
Using the same in X5 works OK and scrolls.
How I can change a setting somewhere so that it scrolls in X3
How to change the mouse wheel settings in the AutoCAD?
In the screenshot below, in the ArcGIS, the mouse wheel movement (backward/forward) can set to be “zoom in/out” depending on our choice.
Is there such settings in the AutoCAD? How to decide to the backward/forward of the mouse wheel mean?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I do have the box checked to scroll with mouse wheel. I am using vista and i have right clicked on photoshop and chosen to run as administrator. No new programs installed, except for a mouse driver. (Dynex) I have been using photoshop for ever on this laptop. I even tried to set the scroll wheel as a "keyboard shortcut"
i have no idea and i am completely stumped. I know i can hold down ctrl and use the mouse wheel to zoom, but that just feels awkward to me.
I'd like to change what the right mouse button does. I went to EDIT > PREFERENCES > INPUT CONTROLLERS and tried to see where to change this (and I did successfully for the mouse wheel last week) but I couldn't find under MOUSE BUTTONS what would control what command is accessed via the right mouse wheel.
how to make a change in the preferences to what the right mouse wheel does? I know where's the most likely place to go to find the command; it's just where to access the right mouse wheel that has me stumped.
I need to do some shading work in Gimp, and for this it would be very nice to have a quick way to change my brush size. Luckily there's a note in the gimp docs on how to program the mouse wheel to do this:
[URL] .....
My laptop only has a touchpad with a little scroll area on the side, but I can't think of a good reason why this should be any different from a scroll wheel on a real mouse. Unfortunately, though, following the documentation doesn't work.
In fact, as far as I can tell, the input controllers dialog does nothing at all on my system--I've looked at the settings for the all of the 'active controllers,' and none of the current settings there match with the actual behavior of Gimp as far as I can tell. It also worries me that the controller names are so generic--they're listed as 'Main Keyboard' and 'Main Mouse Wheel' rather than mentioning a synaptics touchpad, and my tablet doesn't even seem to be listed.
I am using Gimp 2.6.11 on Ubuntu.
my mouse wheel worked for panning while i am in the middle of a command, put now it stopped working and when i click the wheel i get my osnaps command. how can i get my mouse wheel to pan again?
View 6 Replies View RelatedI have recently installed autocad 2011 mac version, i want to change 3 wheel setting from panning to zooming i changed mbutton pan from 0 - 1 but still its not working, i changed zoom wheel from 0 - 1 but its not working and in mac mouse settings are pre installed.
View 1 Replies View RelatedHow to set up my mouse wheel to pan when I click the wheel. I am not sure how to do this?
View 1 Replies View RelatedI have a Logitech MX Laser 1000 mouse, love the mouse. But the Middle scroll button does not pan when you hold down the wheel. And when you double click the wheel it no longer does a zoom extents. When you scroll the wheel it does zoom in and out. My mbuttonpan is set to 1. Not sure if I toggled something on or off.
View 3 Replies View RelatedMy old microsoft mouse died and i replaced it with a new 3500. For some reason, i cant get it to pan when i use the wheel button. it zooms fine with the wheel... just wont pan. I tried changing the wheel function in Control Panel... unfortunately Pan isn't an option for "program specific" functions. The ACAD help section lists pan as the only function with the wheel button.
View 9 Replies View RelatedThe wheel as a pan tool was good the other day, but today when I opened CAD, it did not work anymore, there was no pan tool appearing when holding the wheel of the mouse. It is rather strange!! Then I searched the internet and resetted it by input command " Mbuttonpan---- 1-----enter", But there was no change.
View 5 Replies View RelatedWhen you use the wheel autocad zooms in and out. Is there a way to make it so when you hold ctrl and move the wheel Autocad pans left and right? ANd a shift+wheel pans up and down?
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
I recently installed the Student version of AutoCad 2013 on my Mac through Windows 7. I am not able to use the wheel on my mouse to get to the hand tool to move around. When I hold down the wheel, it swipes over to my Mac dashboard. Also the delete button does not delete. I have to use the E command.
View 9 Replies View RelatedMy laptop died recently and I had to get a new one then reinstall my AutoCAD 2010 software. Trouble is the mouse wheel no longer zooms or, when held down, pans any more. I have spent the last couple of hours trying to sort this but to no avail - nothing happens when I use the mousewheel at all. SO frustrating as I use this all the time!
I run Windows 7 Pro OS and the mouse is a fairly basic HP model with two buttons and a wheel. (maybe I need to upgrade the thing...!)
I just got a new pc upgrade so I'm walking through everything to see if it all works. Now when I double click my mouse wheel, nothing happens where before it would zoom extents. I'm using a MS Wireless Mouse 5000 with AutoCAD 2013.
I played around with programming the mouse buttons directly, but I couldn't get it to work right. I don't see anything in AutoCAD about a setting for mouse wheel double click. All I see is that it just says that double clicking the mouse wheel should execute the zoom extents command.
I've just started with Inventor 2009 and have found that you as default you cannot orbit around by pressing in the mouse scroll wheel, holding ctrl (or shift) and moving around.
This works in AutoCAD 2009 3D and all other 3D software I have used, so I'm assuming that there is a simple setting somewhere to activate this?
How do I configure my mouse wheel to "press to pan" in AutoCAD 2014?
View 2 Replies View RelatedI just installed AutoCAD 2011 (32-bit on Windows XP Pro) and my mouse wheel pan capability is not working. I have already confirmed that my Mbuttonpan variable is set to 1. When I press my mouse wheel button I see the 'hand icon' for a moment before my cursor returns to the crosshairs. The mouse wheel zoom works just fine, and the pan function still works on my old 2010 install.
View 7 Replies View RelatedWhen trying to orbit while pressing the mouse wheel & holding shift nothing happens. I have looked into CUI and everything is set up correctly under mouse buttons. Clicking on the navigation wheel allows me to orbit but using shift and mouse is so much quicker. I have just upgraded to AutoCAD 2013 perhaps that is the problem?
View 6 Replies View Related