AutoCAD 2013 :: Double Click Mouse Wheel
Jun 7, 2012
I just got a new pc upgrade so I'm walking through everything to see if it all works. Now when I double click my mouse wheel, nothing happens where before it would zoom extents. I'm using a MS Wireless Mouse 5000 with AutoCAD 2013.
I played around with programming the mouse buttons directly, but I couldn't get it to work right. I don't see anything in AutoCAD about a setting for mouse wheel double click. All I see is that it just says that double clicking the mouse wheel should execute the zoom extents command.
View 4 Replies
ADVERTISEMENT
Feb 27, 2013
I am working on getting some settings done, moving from 2008 to 2012. How do you set the Middle Mouse Button (wheel) to either Zoom All or Zoom Extents when you double click it? I thought it was set in the Main CUI file.
View 9 Replies
View Related
Aug 23, 2012
When zooming, I middle click the mouse to bring up osnaps, then type the letter to force the snap I want. That stopped working today: the menu pops up, I type "E", the menu goes away, but it doesn't default to endpoint, there's an "E" on my command line.
I'm not sure if this is a Service Pack 1 issue or not, but I just installed that yesterday.
View 9 Replies
View Related
Mar 10, 2010
We have an older engineering in our office who is constantly double clicking his scroll wheel by accident and doing a zoom extents on his layout. He's running LT 2005. I don't see where I can change it. Its not part of the mouse button customization.
View 8 Replies
View Related
Apr 17, 2012
I have noticed that when I click on any button on the Ribbon Panels it now requires more that one click to activate the button.
View 9 Replies
View Related
Jul 16, 2013
my mouse wheel worked for panning while i am in the middle of a command, put now it stopped working and when i click the wheel i get my osnaps command. how can i get my mouse wheel to pan again?
View 6 Replies
View Related
Jun 19, 2013
I recently installed the Student version of AutoCad 2013 on my Mac through Windows 7. I am not able to use the wheel on my mouse to get to the hand tool to move around. When I hold down the wheel, it swipes over to my Mac dashboard. Also the delete button does not delete. I have to use the E command.
View 9 Replies
View Related
Aug 15, 2013
How do I configure my mouse wheel to "press to pan" in AutoCAD 2014?
View 2 Replies
View Related
Aug 29, 2013
When I go into CUI & try to customize the double click for say line & set it to bring up the properties box it works, but it changes all double click actions to do that unless there is already a default double click for a particular command. When I set the double click in the hatch command to edit the hatch (hatch box pops up) it works but it will change the line double click to do the same thing. I don't remember having this problem in 2009. I'm saving in the CUI every time I try this.
View 6 Replies
View Related
Apr 24, 2012
Using 2012 in my CUI I could set the general note label to use the double click function. When I double clicked on any label I'd get the editor box pop up. Now in 2013 for some strange reason that no longer seems to work.
View 9 Replies
View Related
Nov 1, 2012
is there a way to make it so that i right click on the mouse, it does the 'cancel' command??
View 7 Replies
View Related
Apr 24, 2012
Everyone so far in the office who is using 2013 has found that intermitently but fairly often (maybe 1 in 8 attempts) when clicking on a tool button it seems to take about 3-4 goes at clicking before the command kicks in, this is with any command and there are various versions of windows and mouse hardware involved.
View 3 Replies
View Related
Oct 10, 2013
We are starting to install AutoCAD 2014 on our machines. On one of our machines, the user can't get double click editing to work on inserts. I can open the drawing on my machine and it works fine. She is using the same profile and workspace and both machines have SP1 installed. Double click editing works for other objects (MLeaders, Text...) but not for inserts or their attributes. The only way she can edit the attribute text is through the property window.
View 9 Replies
View Related
Feb 19, 2013
I must be using the Enhanced attribute editor the wrong way. Every time I double click the attribute block the enhanced attribute editor opens the dialog box and I have to resize it so a can see all my tags. Then I have to click the tag I want to change then click the value to change it. To change a different tag I have to repeat that process over and over. It makes attributes a complete waste of time. It’s faster to change Mtext or Dtext. I must be doing something wrong. Is there a way to get the dialog box in the image to pop up when I double click the attribute block?
View 3 Replies
View Related
Jul 2, 2013
First, MY specs.
Processor: AMD A6-5400K APU (with Radeon HD Graphics) - 3.60 GHz
RAM: 8.00 GB
System: 64-bit
OS: Windows 8
Version: AutoCAD 2004 LT
Second, what we do.
Commercial MEP design. Project in mention is a 65,000 sq.ft. Italian food market.
Third, the problem.I am experiencing a selection and double click editing problem with AutoCAD 2012LT & AutoCAD 2014LT. On Friday, June 28th we recieved updated (not new) backgrounds from a lighting designer for two floors of the building whose MEP system we are engineering. The second floor had no problems really; we reset some annotation scales and the updated backgrounds plugged right in. The first floor, however, was so messed up that we copied and pasted the track lights and all else into our file directly (vs. xref'ing) and instantly, after a save, it is impossible to evoke any kind of edit with double click. In order for us to modify anything, we have to type the command before editing. So if I want to DDEDIT, I have to type that in before changing the text. If I do select the text first than CAD freezes, takes a huge dump, wipes for 5 minutes, and then the text editor appears. This problem is ubiquitous with all 2012 LT machines and up. AutoCAD 2005 LT has no problem (lmfao).
View 5 Replies
View Related
May 8, 2013
right clicking the mouse normally repeats the previous command. In this case I right click to repeat the "break at point" command. Instead of getting the break at point command, I always get the "break" command.
View 2 Replies
View Related
Aug 27, 2012
This is happening on all my Autodesk software (AutoCAD, Map 3D, and Civil 3D)(2012 and 2013). . .
I initiate a command (say LINE), I pick my first point to draw the line and nothing happens. I must click it again to get it ot work. It only happens when I'm working fast. For instance:
L (for line)right-click (for ENTER)immdediately try to click the first point of the linenothing happens and I must re-pick the firtst point again
or
E (for erase)right-click (for ENTER)immediately try to pick a corner for your boxnothing happens and I must re-create my selection box However, if I go slow it works fine. For instance, after initating the command simply wait about 2 or 3 seconds and then try to click. It all works fine there, but waiting becomes annoying now.
The mouse clicks work fine in all my other software (Excel, MS Word, etc.). I am having another (maybe totally unrealated issue) with my keyboard. While typing, my cursor will magically move somewhere else on the screen. I'm using a laptop and have made sure I'm not touching the touch pad. This may be a completely unrelated issue to the mouse clicks, but I thought I'd inform you just in case the two go hand in had. by the way. . .dynamic mode is disabled, PICKFIRST is set correctly, and I've messed with the 3D Config options.
View 9 Replies
View Related
Feb 15, 2013
I have two menus that I use often and I would like to add them to my mouse buttons. Attached is a picture of the two menus I like and the two buttons. The Shift + Click has the correct menu already (Osnap menu2) my problem is adding my custom menu to the CTRL + Click doesn't work. I labeled Osnap Menu 1 and 2, 1 being the custom menu I have use in the past and 2 being the default osnap menu that comes with the cui file. How to get the second button to read my menu rather than both read the same osnap 2 menu?
View 1 Replies
View Related
Jan 4, 2012
Illustrator CS4
I'm not exactly sure what happened, but suddenly my Type Tool can not select type by double clicking or click and drag any more.
I'm using Illustrator CS4 (14.0.0) on a MacPro with OSX 10.6.8.
View 8 Replies
View Related
Jul 18, 2013
Since we updated to CC, I have a very good chance of this not working evey time I try it. Maybe 10% of the time, it will select the word/line as it should. My prefs are identical for this feature as they have for the past several version of InDesign. My partner also has trouble with copy/paste in InDesign and Illustrator as well.
View 20 Replies
View Related
Feb 8, 2012
I have recently installed autocad 2011 mac version, i want to change 3 wheel setting from panning to zooming i changed mbutton pan from 0 - 1 but still its not working, i changed zoom wheel from 0 - 1 but its not working and in mac mouse settings are pre installed.
View 1 Replies
View Related
Apr 20, 2012
How to set up my mouse wheel to pan when I click the wheel. I am not sure how to do this?
View 1 Replies
View Related
Feb 2, 2012
I have a Logitech MX Laser 1000 mouse, love the mouse. But the Middle scroll button does not pan when you hold down the wheel. And when you double click the wheel it no longer does a zoom extents. When you scroll the wheel it does zoom in and out. My mbuttonpan is set to 1. Not sure if I toggled something on or off.
View 3 Replies
View Related
Oct 29, 2010
My old microsoft mouse died and i replaced it with a new 3500. For some reason, i cant get it to pan when i use the wheel button. it zooms fine with the wheel... just wont pan. I tried changing the wheel function in Control Panel... unfortunately Pan isn't an option for "program specific" functions. The ACAD help section lists pan as the only function with the wheel button.
View 9 Replies
View Related
Sep 17, 2013
Is there a way to change the zoom on the mouse wheel? Currently to zoom out I scroll toward myself. I would like it to be the opposite since other programs I use are set up in this fashion. It would be easier if all were the same.
View 1 Replies
View Related
Jul 12, 2013
The wheel as a pan tool was good the other day, but today when I opened CAD, it did not work anymore, there was no pan tool appearing when holding the wheel of the mouse. It is rather strange!! Then I searched the internet and resetted it by input command " Mbuttonpan---- 1-----enter", But there was no change.
View 5 Replies
View Related
Dec 18, 2012
When you use the wheel autocad zooms in and out. Is there a way to make it so when you hold ctrl and move the wheel Autocad pans left and right? ANd a shift+wheel pans up and down?
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
View 3 Replies
View Related
Mar 23, 2012
My laptop died recently and I had to get a new one then reinstall my AutoCAD 2010 software. Trouble is the mouse wheel no longer zooms or, when held down, pans any more. I have spent the last couple of hours trying to sort this but to no avail - nothing happens when I use the mousewheel at all. SO frustrating as I use this all the time!
I run Windows 7 Pro OS and the mouse is a fairly basic HP model with two buttons and a wheel. (maybe I need to upgrade the thing...!)
View 1 Replies
View Related
Mar 15, 2012
How to change the mouse wheel settings in the AutoCAD?
In the screenshot below, in the ArcGIS, the mouse wheel movement (backward/forward) can set to be “zoom in/out” depending on our choice.
Is there such settings in the AutoCAD? How to decide to the backward/forward of the mouse wheel mean?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 3 Replies
View Related
May 7, 2008
I've just started with Inventor 2009 and have found that you as default you cannot orbit around by pressing in the mouse scroll wheel, holding ctrl (or shift) and moving around.
This works in AutoCAD 2009 3D and all other 3D software I have used, so I'm assuming that there is a simple setting somewhere to activate this?
View 9 Replies
View Related
Feb 1, 2005
Is there a setting to control the speed of the mouse wheel zoom?On the model I'm working on, it takes about 8 scrolls to go from "forestview" to "tree view", and I would like to do it in 2-3 if possible.
View 6 Replies
View Related
