When zooming, I middle click the mouse to bring up osnaps, then type the letter to force the snap I want. That stopped working today: the menu pops up, I type "E", the menu goes away, but it doesn't default to endpoint, there's an "E" on my command line.
I'm not sure if this is a Service Pack 1 issue or not, but I just installed that yesterday.
I just got a new pc upgrade so I'm walking through everything to see if it all works. Now when I double click my mouse wheel, nothing happens where before it would zoom extents. I'm using a MS Wireless Mouse 5000 with AutoCAD 2013.
I played around with programming the mouse buttons directly, but I couldn't get it to work right. I don't see anything in AutoCAD about a setting for mouse wheel double click. All I see is that it just says that double clicking the mouse wheel should execute the zoom extents command.
my mouse wheel worked for panning while i am in the middle of a command, put now it stopped working and when i click the wheel i get my osnaps command. how can i get my mouse wheel to pan again?
View 6 Replies View RelatedI have an inactive snap shortcut menu. When clicking shift + right mouse button the menu appears but when I typet
"E" for "ENDpoint", "M" for "Midpoint" or when I just click over the respective icons in the menu nothing really happens and I get the following message in the command bar:
"Command: _endp Unknown command "ENDP". Press F1 for help."
or
"Command: _mid Unknown command "MID". Press F1 for help."
I tried following, none of which worked:
1. resetting the main customization file ACA_Global.cuix
2. switching between different profiles and cuix files
3. reinstalling Autocad Architecture 2013
4. uninstalling and Installing Autocad Architecture 2013 service pack 1
5. installing older versions of Autocad (2008 and Architecture 2012)
6. reinstalling Windows 7 and installing Autocad Architecture 2013 again
I am working on getting some settings done, moving from 2008 to 2012. How do you set the Middle Mouse Button (wheel) to either Zoom All or Zoom Extents when you double click it? I thought it was set in the Main CUI file.
View 9 Replies View RelatedI lost my setup in the right click for my menu. How can I bring it back?
View 2 Replies View RelatedI recently installed the Student version of AutoCad 2013 on my Mac through Windows 7. I am not able to use the wheel on my mouse to get to the hand tool to move around. When I hold down the wheel, it swipes over to my Mac dashboard. Also the delete button does not delete. I have to use the E command.
View 9 Replies View RelatedHow do I configure my mouse wheel to "press to pan" in AutoCAD 2014?
View 2 Replies View RelatedFor as long as I can remember, across all versions of Autocad, I've had problems picking the right item on the popup menu for object snap (shift-right click). It frequently picks the item below the intended one, i.e. it will pick Parallel rather than Perpendicular. Trying a second time works every time. This problem has been so consistent that I don't believe it is user error. The item is highlighted, after all. There is no way I'm repeatedly missing it. Is it possible to calibrate the mouse in Autocad?
View 9 Replies View RelatedAccelerator Keys
My accelerator keys for the right-click object-snap cursor menu do not work. For example, I will be drawing a line and I will bring up the object-snap menu, then I will select ‘E’ for endpoint snap, the ‘e’ will display in the dynamic input window and the snap does not work.
I have my own Palette Set.
On this Palette Set I have a palette withe a tree.
On the right click of the node, I call a command (it's one of our own ObjectARX commands, but the problem is the same with a build in command).
The command wants the user to select a point, with a few options. If I first select a point (left click) and then click right, everything works fine.
But If I click with the right button, before I select anything, the menu is not shown.
The code for calling the command is really easy:
Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.SendStringToExecute("_ARC
",true,false,false);
As said before... I don't call the _ARC command... but for the arc Command the right click menu is not shown also...What can I do, to get the normal behavior of the right click?
is there a way to make it so that i right click on the mouse, it does the 'cancel' command??
View 7 Replies View RelatedEveryone so far in the office who is using 2013 has found that intermitently but fairly often (maybe 1 in 8 attempts) when clicking on a tool button it seems to take about 3-4 goes at clicking before the command kicks in, this is with any command and there are various versions of windows and mouse hardware involved.
View 3 Replies View Relatedright clicking the mouse normally repeats the previous command. In this case I right click to repeat the "break at point" command. Instead of getting the break at point command, I always get the "break" command.
View 2 Replies View RelatedThis is happening on all my Autodesk software (AutoCAD, Map 3D, and Civil 3D)(2012 and 2013). . .
I initiate a command (say LINE), I pick my first point to draw the line and nothing happens. I must click it again to get it ot work. It only happens when I'm working fast. For instance:
L (for line)right-click (for ENTER)immdediately try to click the first point of the linenothing happens and I must re-pick the firtst point again
or
E (for erase)right-click (for ENTER)immediately try to pick a corner for your boxnothing happens and I must re-create my selection box However, if I go slow it works fine. For instance, after initating the command simply wait about 2 or 3 seconds and then try to click. It all works fine there, but waiting becomes annoying now.
The mouse clicks work fine in all my other software (Excel, MS Word, etc.). I am having another (maybe totally unrealated issue) with my keyboard. While typing, my cursor will magically move somewhere else on the screen. I'm using a laptop and have made sure I'm not touching the touch pad. This may be a completely unrelated issue to the mouse clicks, but I thought I'd inform you just in case the two go hand in had. by the way. . .dynamic mode is disabled, PICKFIRST is set correctly, and I've messed with the 3D Config options.
I have attached an image...but in 2013 we had an expanded Right Click shortcut menu...so if you clicked on a line for example it would give you alot of options...as you see in the image I do not have all those in 2014.
My "Shortcutmenu" is set to 11
Pickfirst is set to 1.
In CUI I do not see any seperate menus loaded under Shortcut.
Where the paste on the mouse right click menu is greyed out? Is it maybe a system variable I am missing? Both are on Win 7 Pro 64 and AutoCAD 2013 64bit.
View 5 Replies View RelatedHow do I change the short cut keys in only the right click menu? For example I used to be able to right click then type M for move in 2012. Now in 2013, I have to right click then click V for move. I also used to be able to right click and type O for rotate. Now nothing happens. I have to click again on rotate rather than typing a key. There's a few others I'd like to change.
View 9 Replies View RelatedI have two menus that I use often and I would like to add them to my mouse buttons. Attached is a picture of the two menus I like and the two buttons. The Shift + Click has the correct menu already (Osnap menu2) my problem is adding my custom menu to the CTRL + Click doesn't work. I labeled Osnap Menu 1 and 2, 1 being the custom menu I have use in the past and 2 being the default osnap menu that comes with the cui file. How to get the second button to read my menu rather than both read the same osnap 2 menu?
View 1 Replies View RelatedI have recently installed autocad 2011 mac version, i want to change 3 wheel setting from panning to zooming i changed mbutton pan from 0 - 1 but still its not working, i changed zoom wheel from 0 - 1 but its not working and in mac mouse settings are pre installed.
View 1 Replies View RelatedHow to set up my mouse wheel to pan when I click the wheel. I am not sure how to do this?
View 1 Replies View RelatedI have a Logitech MX Laser 1000 mouse, love the mouse. But the Middle scroll button does not pan when you hold down the wheel. And when you double click the wheel it no longer does a zoom extents. When you scroll the wheel it does zoom in and out. My mbuttonpan is set to 1. Not sure if I toggled something on or off.
View 3 Replies View RelatedMy old microsoft mouse died and i replaced it with a new 3500. For some reason, i cant get it to pan when i use the wheel button. it zooms fine with the wheel... just wont pan. I tried changing the wheel function in Control Panel... unfortunately Pan isn't an option for "program specific" functions. The ACAD help section lists pan as the only function with the wheel button.
View 9 Replies View RelatedIs there a way to change the zoom on the mouse wheel? Currently to zoom out I scroll toward myself. I would like it to be the opposite since other programs I use are set up in this fashion. It would be easier if all were the same.
View 1 Replies View RelatedThe wheel as a pan tool was good the other day, but today when I opened CAD, it did not work anymore, there was no pan tool appearing when holding the wheel of the mouse. It is rather strange!! Then I searched the internet and resetted it by input command " Mbuttonpan---- 1-----enter", But there was no change.
View 5 Replies View RelatedWhen you use the wheel autocad zooms in and out. Is there a way to make it so when you hold ctrl and move the wheel Autocad pans left and right? ANd a shift+wheel pans up and down?
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
My laptop died recently and I had to get a new one then reinstall my AutoCAD 2010 software. Trouble is the mouse wheel no longer zooms or, when held down, pans any more. I have spent the last couple of hours trying to sort this but to no avail - nothing happens when I use the mousewheel at all. SO frustrating as I use this all the time!
I run Windows 7 Pro OS and the mouse is a fairly basic HP model with two buttons and a wheel. (maybe I need to upgrade the thing...!)
How to change the mouse wheel settings in the AutoCAD?
In the screenshot below, in the ArcGIS, the mouse wheel movement (backward/forward) can set to be “zoom in/out” depending on our choice.
Is there such settings in the AutoCAD? How to decide to the backward/forward of the mouse wheel mean?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I've just started with Inventor 2009 and have found that you as default you cannot orbit around by pressing in the mouse scroll wheel, holding ctrl (or shift) and moving around.
This works in AutoCAD 2009 3D and all other 3D software I have used, so I'm assuming that there is a simple setting somewhere to activate this?
Is there a setting to control the speed of the mouse wheel zoom?On the model I'm working on, it takes about 8 scrolls to go from "forestview" to "tree view", and I would like to do it in 2-3 if possible.
View 6 Replies View RelatedI just installed AutoCAD 2011 (32-bit on Windows XP Pro) and my mouse wheel pan capability is not working. I have already confirmed that my Mbuttonpan variable is set to 1. When I press my mouse wheel button I see the 'hand icon' for a moment before my cursor returns to the crosshairs. The mouse wheel zoom works just fine, and the pan function still works on my old 2010 install.
View 7 Replies View Related