AutoCAD 2013 :: Way To Make Right Click On Mouse
Nov 1, 2012is there a way to make it so that i right click on the mouse, it does the 'cancel' command??
View 7 Replies
ADVERTISEMENT
AutoCAD 2013 :: Mouse Click Taking 3 Or 4 Goes?
Apr 24, 2012Everyone so far in the office who is using 2013 has found that intermitently but fairly often (maybe 1 in 8 attempts) when clicking on a tool button it seems to take about 3-4 goes at clicking before the command kicks in, this is with any command and there are various versions of windows and mouse hardware involved.
View 3 Replies View RelatedAutoCAD 2013 :: Double Click Mouse Wheel
Jun 7, 2012I just got a new pc upgrade so I'm walking through everything to see if it all works. Now when I double click my mouse wheel, nothing happens where before it would zoom extents. I'm using a MS Wireless Mouse 5000 with AutoCAD 2013.
I played around with programming the mouse buttons directly, but I couldn't get it to work right. I don't see anything in AutoCAD about a setting for mouse wheel double click. All I see is that it just says that double clicking the mouse wheel should execute the zoom extents command.
AutoCAD 2013 :: Mouse Wheel Click Snap Menu?
Aug 23, 2012When zooming, I middle click the mouse to bring up osnaps, then type the letter to force the snap I want. That stopped working today: the menu pops up, I type "E", the menu goes away, but it doesn't default to endpoint, there's an "E" on my command line.
I'm not sure if this is a Service Pack 1 issue or not, but I just installed that yesterday.
AutoCAD 2013 :: Break At Point Don't Work / When Right Click On Mouse
May 8, 2013right clicking the mouse normally repeats the previous command. In this case I right click to repeat the "break at point" command. Instead of getting the break at point command, I always get the "break" command.
View 2 Replies View RelatedAutoCAD 2013 :: Mouse Click Doesn't Stick After Initializing Command
Aug 27, 2012This is happening on all my Autodesk software (AutoCAD, Map 3D, and Civil 3D)(2012 and 2013). . .
I initiate a command (say LINE), I pick my first point to draw the line and nothing happens. I must click it again to get it ot work. It only happens when I'm working fast. For instance:
L (for line)right-click (for ENTER)immdediately try to click the first point of the linenothing happens and I must re-pick the firtst point again
or
E (for erase)right-click (for ENTER)immediately try to pick a corner for your boxnothing happens and I must re-create my selection box However, if I go slow it works fine. For instance, after initating the command simply wait about 2 or 3 seconds and then try to click. It all works fine there, but waiting becomes annoying now.
The mouse clicks work fine in all my other software (Excel, MS Word, etc.). I am having another (maybe totally unrealated issue) with my keyboard. While typing, my cursor will magically move somewhere else on the screen. I'm using a laptop and have made sure I'm not touching the touch pad. This may be a completely unrelated issue to the mouse clicks, but I thought I'd inform you just in case the two go hand in had. by the way. . .dynamic mode is disabled, PICKFIRST is set correctly, and I've messed with the 3D Config options.
AutoCAD Visual LISP / AutoLISP :: Possible To Make Left Mouse Click Initiate Zoom Window?
Jan 1, 2012I still want it to have its normal behavior while in a command, but when not in a command it still enters the selection mode, which does not work, but if it would enter a zoom window command, it might be a more useful command.
View 5 Replies View RelatedAutoCAD 2010 :: Shortcut Menus Mouse Buttons (CRTL+Right Click And SHIFT+Right Click)
Feb 15, 2013I have two menus that I use often and I would like to add them to my mouse buttons. Attached is a picture of the two menus I like and the two buttons. The Shift + Click has the correct menu already (Osnap menu2) my problem is adding my custom menu to the CTRL + Click doesn't work. I labeled Osnap Menu 1 and 2, 1 being the custom menu I have use in the past and 2 being the default osnap menu that comes with the cui file. How to get the second button to read my menu rather than both read the same osnap 2 menu?
View 1 Replies View RelatedPhotoshop :: Mouse Left+click/Right+click
Jan 18, 2008I use cs2 and when in photoshop when i left click on any of the tools for instance the pen tool it brings up the menu to select pen tool, freeform pen tool, etc.. rather than just selecting it. I am use to having to right click on the the pen tool to get that menu, i was wondering how i would change it back. Same thing happens when i left click on all the tools on the tools menu, just used the pen tool as an example.
View 5 Replies View RelatedAutoCAD 2010 :: Right Click On Mouse
Feb 29, 2012I'm having trouble with my right click on my mouse. Until about a month or so ago my right click would bring up a short cut menu that inclided things like move, rotate, scale, copy. But now it includes none of those features.
View 4 Replies View RelatedAutoCad :: Objects Are Not Selected Before Click The Mouse?
Jun 19, 2012When moving the mouse over objects, the objects are automatically selected. Are there a way to disconnect that function, so the objects are not selected before I click the mouse?
View 6 Replies View RelatedAutoCad :: Mouse Is Set To Repeat Last Command On Right Click
Jan 13, 2012I have 2010lt on Vista. Mouse is set to repeat last command on right click. When I right click to repeat break at point command, it will shorten the line every time. When I click the break at point icon it does not shorten line. I cant find a fix.
View 9 Replies View RelatedAutoCAD LT :: 2013 Single Click On Ribbon Is Now A Double Click
Apr 17, 2012I have noticed that when I click on any button on the Ribbon Panels it now requires more that one click to activate the button.
View 9 Replies View RelatedAutoCAD 2010 :: Allow Right Click Mouse Button To Function Of F3 Key?
Mar 16, 2012how to allow my right click mouse button to the function of the F3 key? I want to be able to draw, move, copy or whatever and mid-command be able to right click (on or off) the snap that are assigned to F3.
View 1 Replies View RelatedAutoCAD .NET :: How To Remove Duplicate Mouse Right Click Event
Apr 30, 2012I have the right click on autocad for repeat the last command.
when i launch my prog. --> the prog show a form with a datagridview. I have added a contextMenuStrip in this datagridview.
SO when i launch the prog with the right click (repeat last command) the form show and the contextmenustrip too. (if the mouse is on the datagrid.)
How i can cancel or purge the event mouse right click ?
AutoCAD Architecture :: Getting Object ID For Mouse Click Event
Apr 11, 2011I am developing a .NET application that integrates with AutoCAD Architecture. In my .NET application, I provide my user with a list of drawing files (.dwg) that they can choose to open. Once my user has selected a file, my application will open the selected drawing in AutoCAD Architecture. In this drawing, the user can click on an object in the drawing.
Can this mouse click event be captured and the object ID for the selected object be returned to my application?
AutoCad :: Lost Setup In Mouse Right Click For Menu?
Jan 10, 2013I lost my setup in the right click for my menu. How can I bring it back?
View 2 Replies View RelatedAutoCAD Inventor :: Get Point Location Of Mouse Click Using ILogic
Mar 4, 2013I'm trying to get the point location of a mouse click in an Inventor drawing using an iLogic Rule. Any examples of using mouse events in iLogic?
View 9 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: How To GETPOINT Via Mouse Click Only
Dec 22, 2011I am trying to limit the input that can be processed when using the getpoint lisp function. So the code below prevents the user from entering null input (i.e just hitting a carraige return) as specified by the initget bit code of 1, or a non-numeric entry (i.e. for instance, typing S and hitting a carriage return) as the getpoint function does not allow for a non-numeric entry.
(initget 1)
(setq PT1 (getpoint "
Pick Location of First Point: "))
However, the issue is that the code does NOT prevent the user from entering a number and hitting return. For instance, if I enter the number 100 and hit return, getpoint accepts this as a valid entry and returns a point value that is projected, in some form or fashion, from I believe the last entered point or (0,0,0) if a point was not previously entered. I only want the user to be able to select a point with a mouse click and not type in a number or point coordinate.
So is there some way with AutoLISP or Visual Lisp that you can prevent the user from typing in a numeric value and hitting a carraige return in conjuction with the getpoint function? Or is there some other function that will provide the getpoint functionality while providing the entry limitations described?
AutoCad :: Create Shortcut For Mouse Left-click Button On Keyboard?
Aug 1, 2013Is there a way to create a shortcut for mouse left-click button on the keyboard?
View 8 Replies View RelatedAutoCAD .NET :: What Event To Be Used To Read Left Click Mouse Location All The Time
Sep 2, 2011I want to be able to read the left click mouse button coordination all the times . Is it possible ?
View 4 Replies View RelatedAutoCAD .NET :: Right Mouse Click Doesn't Open Menu If Call Command From Palette-Set
Oct 23, 2013I have my own Palette Set.
On this Palette Set I have a palette withe a tree.
On the right click of the node, I call a command (it's one of our own ObjectARX commands, but the problem is the same with a build in command).
The command wants the user to select a point, with a few options. If I first select a point (left click) and then click right, everything works fine.
But If I click with the right button, before I select anything, the menu is not shown.
The code for calling the command is really easy:
Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.SendStringToExecute("_ARC
",true,false,false);
As said before... I don't call the _ARC command... but for the arc Command the right click menu is not shown also...What can I do, to get the normal behavior of the right click?
AutoCAD LT :: Mouse Left Click Selecting Multiple Lines / Objects Not Working
Feb 26, 2012Can not click on multiple objects or lines for erase,trim or extend commands. Is there a mode that I have turned on by accident , driver warning also comes up in trim offset command.
View 6 Replies View RelatedPhotoshop :: Zooming Out With Right Mouse Click
Jun 6, 2006is it possible to configure photoshop to zoom out on right mouseclick. The same way it zooms in with left mouseclick.
View 3 Replies View RelatedPhotoshop :: Right-Click On My Mouse In My Pictures
Jul 5, 2006I right-click on a jpeg with my mouse in My Pictures (I'm a Windows user) for example, I only see the options Preview, Edit, Print and so on. I do not see 'Edit with Photoshop' there anymore.
I hope to have 'Edit with Photoshop' when I right-click.
Photoshop :: Random Mouse Coords On Click
May 1, 2013URLs....every tool useless without closing and restarting Photoshop.It always happens for me after the computer has been in sleep mode, although I have seen it occur out of nowhere from a fresh boot.I'm using a completely generic 3 button MS optical mouse with the generic MS driver, no other programs on my machine suffer from completely random mouse coords, including Photoshop CS3.
For replying with 'check your drivers': URL....
Here is the full system info for my machine:
Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x32
Operating System: Windows 7 32-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:7, Stepping:6 with MMX, SSE Integer, SSE FP, SSE2, SSE3
Physical processor count: 2
Processor speed: 2493 MHz
[code]....
Photoshop :: Disable Left Mouse Click With Pen
May 25, 2012I have a tablet and I am trying to change brush size and hardness with the pen but I keep creating new layers. Is there a way to turn this off because I would like it to flow better. With the mouse if I ctrl+alt +left mouse is gives me a new copy of my layer. With the pen I get the pressure/size to come up but it is fickle and mostly just resorts to creating a new layer copy which is what I want to disable so it just does the brush size/hardness option. It seems the left mouse click doesn't display in any keyboard shortcuts.
View 1 Replies View RelatedPhotoshop :: How To Record Mouse Click Position...
Jun 2, 2008I want to write a plug-in that records all the mouse clicking position coordinates while using a polygon lasso tool. How can I get those? I have been reading through the API, but I see none of the functions that does so. Is there a way to record the x and y coordinates in an image. (Assumption: Only one layer).
View 1 Replies View RelatedPaint.NET :: Middle Mouse Click As Eye Dropper
Mar 18, 2012Similar to how Minecraft allows you to select the block your cursor is over via middle mouse click,
wouldn't it be intuitive to make the eye dropper/color selector bound to the middle mouse button?
As far as I can tell, a middle mouse click does nothing in PDN right now and when I tested to see if this feature was already implemented, it just felt right to me.
So I say follow in Notch's footsteps with the middle mouse button, afterall he himself advocated PDN on his blog for creating games
Edge Animate CC :: If Else Statement With Mouse Click
Jan 20, 2013I'm having a problem with IF ELSE code use with a mouse click. What I want each time a user "clicks" i want to execute a particular block of code, up to 3 clicks, then nothing. I've tried local and global click counter var but can't seem to get past the first "if". This is what I have now (I'm using console.log() to keep track.
In comp ready i create a global var ...
// insert code to be run when the composition is fully loaded heresym.getComposition().getStage().setVariable('clickcnt', 1); //set counter to 1
var i = sym.getComposition().getStage().getVariable('clickcnt');
console.log ("Counter is starting at "+i);
on the stage i create a "click" event..
// insert code for mouse click herevar i = (sym.getComposition().getStage().getVariable('clickcnt'); if (i=1){ console.log("counter is = "+i); //do some code sym.getComposition().getStage().setVariable('clickcnt', 2); //set counter to 2 } else if (i=2){ console.log("counter is = "+i); //do some code sym.getComposition().getStage().setVariable('clickcnt', 3); //set counter to 3 } else if (i=3){ console.log("counter is = "+i); //do some code sym.getComposition().getStage().setVariable('clickcnt', 4); //set counter to 4 taking it out of range sym.play(100); //play the timeline animation } else { //
I'm using this to negate any further clicks. I'm sure there's a proper way to do this. I just don't know it. sym.stop(1000); console.log("end"); };I When I run this It never gets passed the first if, It's like the "clickcnt" var is not getting updated or read properly.
Photoshop :: CS6 - Left Click Mouse Button Way Too Touchy
Jul 31, 2012When holding down the left mouse button in the scroll bar area for just a fraction of a second too long, the scroll bar moves several positions. In the past, it wasn't this touchy. It's so touchy that it's impossible to CONSISTENTLY click once and make the scroll thingy move just one position. In previous versions, it works like a charm. Is there a way to adjust this mouse issue?
I use it on every image for cloning so that I can check one section at a time. For this reason, I've now gone back to CS5, but also because CS6 crashes on me and it sometimes gets stuck on Auto Saving files (possibly because they're big).