When moving the mouse over objects, the objects are automatically selected. Are there a way to disconnect that function, so the objects are not selected before I click the mouse?
View 6 RepliesCan not click on multiple objects or lines for erase,trim or extend commands. Is there a mode that I have turned on by accident , driver warning also comes up in trim offset command.
View 6 Replies View RelatedI've gotten into a mode where I can't move objects by click dragging the mouse with the left mouse button. I've looked everywhere to see if there is some config parameter that changes the meaning of mouse buttons, but have found none. I've rebooted and reloaded Draw and nothing has changed. I'm sure X6 didn't come this way, even though I've only been using X6 for 6 months or so. I click drag move objects all the time, so I'm sure I'd have noticed this. I've even tried resetting the workspace, but holding down the F8 key while loading Draw doesn't seem to work.
View 8 Replies View RelatedI have two menus that I use often and I would like to add them to my mouse buttons. Attached is a picture of the two menus I like and the two buttons. The Shift + Click has the correct menu already (Osnap menu2) my problem is adding my custom menu to the CTRL + Click doesn't work. I labeled Osnap Menu 1 and 2, 1 being the custom menu I have use in the past and 2 being the default osnap menu that comes with the cui file. How to get the second button to read my menu rather than both read the same osnap 2 menu?
View 1 Replies View RelatedI use cs2 and when in photoshop when i left click on any of the tools for instance the pen tool it brings up the menu to select pen tool, freeform pen tool, etc.. rather than just selecting it. I am use to having to right click on the the pen tool to get that menu, i was wondering how i would change it back. Same thing happens when i left click on all the tools on the tools menu, just used the pen tool as an example.
View 5 Replies View RelatedI'm having trouble with my right click on my mouse. Until about a month or so ago my right click would bring up a short cut menu that inclided things like move, rotate, scale, copy. But now it includes none of those features.
View 4 Replies View Relatedis there a way to make it so that i right click on the mouse, it does the 'cancel' command??
View 7 Replies View RelatedEveryone so far in the office who is using 2013 has found that intermitently but fairly often (maybe 1 in 8 attempts) when clicking on a tool button it seems to take about 3-4 goes at clicking before the command kicks in, this is with any command and there are various versions of windows and mouse hardware involved.
View 3 Replies View RelatedI have 2010lt on Vista. Mouse is set to repeat last command on right click. When I right click to repeat break at point command, it will shorten the line every time. When I click the break at point icon it does not shorten line. I cant find a fix.
View 9 Replies View Relatedhow to allow my right click mouse button to the function of the F3 key? I want to be able to draw, move, copy or whatever and mid-command be able to right click (on or off) the snap that are assigned to F3.
View 1 Replies View RelatedI have the right click on autocad for repeat the last command.
when i launch my prog. --> the prog show a form with a datagridview. I have added a contextMenuStrip in this datagridview.
SO when i launch the prog with the right click (repeat last command) the form show and the contextmenustrip too. (if the mouse is on the datagrid.)
How i can cancel or purge the event mouse right click ?
I just got a new pc upgrade so I'm walking through everything to see if it all works. Now when I double click my mouse wheel, nothing happens where before it would zoom extents. I'm using a MS Wireless Mouse 5000 with AutoCAD 2013.
I played around with programming the mouse buttons directly, but I couldn't get it to work right. I don't see anything in AutoCAD about a setting for mouse wheel double click. All I see is that it just says that double clicking the mouse wheel should execute the zoom extents command.
I am developing a .NET application that integrates with AutoCAD Architecture. In my .NET application, I provide my user with a list of drawing files (.dwg) that they can choose to open. Once my user has selected a file, my application will open the selected drawing in AutoCAD Architecture. In this drawing, the user can click on an object in the drawing.
Can this mouse click event be captured and the object ID for the selected object be returned to my application?
I lost my setup in the right click for my menu. How can I bring it back?
View 2 Replies View RelatedWhen zooming, I middle click the mouse to bring up osnaps, then type the letter to force the snap I want. That stopped working today: the menu pops up, I type "E", the menu goes away, but it doesn't default to endpoint, there's an "E" on my command line.
I'm not sure if this is a Service Pack 1 issue or not, but I just installed that yesterday.
right clicking the mouse normally repeats the previous command. In this case I right click to repeat the "break at point" command. Instead of getting the break at point command, I always get the "break" command.
View 2 Replies View RelatedI'm trying to get the point location of a mouse click in an Inventor drawing using an iLogic Rule. Any examples of using mouse events in iLogic?
View 9 Replies View RelatedI am trying to limit the input that can be processed when using the getpoint lisp function. So the code below prevents the user from entering null input (i.e just hitting a carraige return) as specified by the initget bit code of 1, or a non-numeric entry (i.e. for instance, typing S and hitting a carriage return) as the getpoint function does not allow for a non-numeric entry.
(initget 1)
(setq PT1 (getpoint "
Pick Location of First Point: "))
However, the issue is that the code does NOT prevent the user from entering a number and hitting return. For instance, if I enter the number 100 and hit return, getpoint accepts this as a valid entry and returns a point value that is projected, in some form or fashion, from I believe the last entered point or (0,0,0) if a point was not previously entered. I only want the user to be able to select a point with a mouse click and not type in a number or point coordinate.
So is there some way with AutoLISP or Visual Lisp that you can prevent the user from typing in a numeric value and hitting a carraige return in conjuction with the getpoint function? Or is there some other function that will provide the getpoint functionality while providing the entry limitations described?
This is happening on all my Autodesk software (AutoCAD, Map 3D, and Civil 3D)(2012 and 2013). . .
I initiate a command (say LINE), I pick my first point to draw the line and nothing happens. I must click it again to get it ot work. It only happens when I'm working fast. For instance:
L (for line)right-click (for ENTER)immdediately try to click the first point of the linenothing happens and I must re-pick the firtst point again
or
E (for erase)right-click (for ENTER)immediately try to pick a corner for your boxnothing happens and I must re-create my selection box However, if I go slow it works fine. For instance, after initating the command simply wait about 2 or 3 seconds and then try to click. It all works fine there, but waiting becomes annoying now.
The mouse clicks work fine in all my other software (Excel, MS Word, etc.). I am having another (maybe totally unrealated issue) with my keyboard. While typing, my cursor will magically move somewhere else on the screen. I'm using a laptop and have made sure I'm not touching the touch pad. This may be a completely unrelated issue to the mouse clicks, but I thought I'd inform you just in case the two go hand in had. by the way. . .dynamic mode is disabled, PICKFIRST is set correctly, and I've messed with the 3D Config options.
Is there a way to create a shortcut for mouse left-click button on the keyboard?
View 8 Replies View RelatedI want to be able to read the left click mouse button coordination all the times . Is it possible ?
View 4 Replies View RelatedI have my own Palette Set.
On this Palette Set I have a palette withe a tree.
On the right click of the node, I call a command (it's one of our own ObjectARX commands, but the problem is the same with a build in command).
The command wants the user to select a point, with a few options. If I first select a point (left click) and then click right, everything works fine.
But If I click with the right button, before I select anything, the menu is not shown.
The code for calling the command is really easy:
Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument.SendStringToExecute("_ARC
",true,false,false);
As said before... I don't call the _ARC command... but for the arc Command the right click menu is not shown also...What can I do, to get the normal behavior of the right click?
I s there an efficient way of stretching an object. Usually I drag my mouse from right to left, thereby selecting objects that my selection box just touches. I want to drag my mouse from left to right so that only the vertices which are inside my selection box get selected.
View 9 Replies View Relatedis it possible to configure photoshop to zoom out on right mouseclick. The same way it zooms in with left mouseclick.
View 3 Replies View RelatedI right-click on a jpeg with my mouse in My Pictures (I'm a Windows user) for example, I only see the options Preview, Edit, Print and so on. I do not see 'Edit with Photoshop' there anymore.
I hope to have 'Edit with Photoshop' when I right-click.
I still want it to have its normal behavior while in a command, but when not in a command it still enters the selection mode, which does not work, but if it would enter a zoom window command, it might be a more useful command.
View 5 Replies View RelatedIf I select some objects (i.e. pipe, feature line, etc.) and right click to bring up my shortcuts, I click on SOME commands (i.e. object viewer, elevation editor, etc....respectively, the command does not progress....it forces me back to a selection box cursor and I have to reselect the object.
For example, I select a pipe, I then right click, shortcut menu pops up, I select "object viewer", and then my previous slection is not granted and it asked for a new selection (it used to always just proceed with the command), I then have to select the pipe I had previously seleted, and the command proceeds as normal.
not a bid deal, but it slowing down my productivity having to select these items twice. The wierd thing is that it is not like this with all of my right click short cut commands...only a few!?
URLs....every tool useless without closing and restarting Photoshop.It always happens for me after the computer has been in sleep mode, although I have seen it occur out of nowhere from a fresh boot.I'm using a completely generic 3 button MS optical mouse with the generic MS driver, no other programs on my machine suffer from completely random mouse coords, including Photoshop CS3.
For replying with 'check your drivers': URL....
Here is the full system info for my machine:
Adobe Photoshop Version: 13.1.2 (13.1.2 20130105.r.224 2013/01/05:23:00:00) x32
Operating System: Windows 7 32-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:7, Stepping:6 with MMX, SSE Integer, SSE FP, SSE2, SSE3
Physical processor count: 2
Processor speed: 2493 MHz
[code]....
I have a tablet and I am trying to change brush size and hardness with the pen but I keep creating new layers. Is there a way to turn this off because I would like it to flow better. With the mouse if I ctrl+alt +left mouse is gives me a new copy of my layer. With the pen I get the pressure/size to come up but it is fickle and mostly just resorts to creating a new layer copy which is what I want to disable so it just does the brush size/hardness option. It seems the left mouse click doesn't display in any keyboard shortcuts.
View 1 Replies View RelatedI want to write a plug-in that records all the mouse clicking position coordinates while using a polygon lasso tool. How can I get those? I have been reading through the API, but I see none of the functions that does so. Is there a way to record the x and y coordinates in an image. (Assumption: Only one layer).
View 1 Replies View RelatedSimilar to how Minecraft allows you to select the block your cursor is over via middle mouse click,
wouldn't it be intuitive to make the eye dropper/color selector bound to the middle mouse button?
As far as I can tell, a middle mouse click does nothing in PDN right now and when I tested to see if this feature was already implemented, it just felt right to me.
So I say follow in Notch's footsteps with the middle mouse button, afterall he himself advocated PDN on his blog for creating games